Question about 2003 kawasaki KX 125

2 Answers

Bike runs but after a while just drops revs and cuts out new plug put in stoped for a while and is now doing it again kx80 02plate

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check your air filter is clean and hasnt got a hole or a tear in it. A had this problem on a kx80, it ran great then started bogging after 800yards it turned out the air filter had a tear in it, as soon as a replaced the airfilter problem solved. happy days!!!

Posted on Jul 07, 2010

  • Stuart Stevenson Jul 07, 2010

    clean the carb out and check the setting on the float, has the bike had the same fuel in it for a few weeks if so replace the fuel aswell. also check its the right temp spark plug your using for it, cos if thats wrong it can cause you to foul spark plugs.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

CLEAN OUT YOUR SILENER

Posted on May 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda paneuropeanst1300.yr 2005.bike started no problem ran with auotmatic choke on droped in reves then stoped, and would not start


Step one, is petcock open? And what exactly do you mean by "dropped in revs?" Did it happen suddenly? Or was it the normal drop after the engine warms up?

Jul 26, 2015 | Honda Motorcycles

1 Answer

I have a opel corsa B 1.6is 2000 model it first started with cutting out when I come 2 a stoped then got worse where it didn't wana start again took out spark plugs they were pitch black sign of ova...


It is a pity that you altered the settings before you did a fault code run. It may have been a simple case of faulty HO2s/o2s sensors that affect the control of the air /fuel mixture. Did you check the condition of the injectors before doing anything. Both of these result in over fuel and black plugs.

Jul 06, 2014 | Cars & Trucks

1 Answer

Legend tt cuts out when put in gear


My bike cut out after a short time when the choke was released when warm. I changed the crank position sensor and did all relevant checks. took it to a Triumph dealer who took three weeks to repair the bike. They said that it turned out to be a perished carb' diaphragm which let the needle drop when as vacuum decreased when the revs dropped as the choke was returned.

Jun 10, 2014 | 2000 Triumph Legend TT

1 Answer

Hi everybody. I have a Ducati s4r 996 i have exhaust system open airbox with k&n filter and some tweaking on the Co trim, the bike runs a little bit rich but this is just until the power commander to...


No, not the spark plugs. Likely a limp mode from the bikes ECU. Your air box and filter modes may cause a lean fuel condition, not rich. Wait till you get and install your Power Commander. The ECU should reset when you disconnect the battery for the PC install. Make sure you get the right map for your PC.

Oct 28, 2013 | Motorcycles

1 Answer

My 1997 900 Triumph sport sprint started to run on 2 cylinders, I thought it was going onto reserve so turned the tap to the reserve position but this didn't solve the problem. When I got home I drained...


Sounds like something has clogged one of the pilot jets in the carburators. You can figure out which one by feeling which pipe is cold after running for a short time. Probably best to clean all 3 carbs while you have them off.

Sep 25, 2013 | Triumph Motorcycles

1 Answer

My honda cbr 125r 2007 keeps cutting out its not the spark plug as its new please help


double check your electrics, probably a loose plug somewhere. Possibly even a fuse that's only half in or a loose connection on your battery

Aug 16, 2012 | Honda CBR 125 R Motorcycles

1 Answer

1985 SPEED TRIPLE (only done 10,000 miles from new) Engine runs on all three cylinders & will rev up to 8000rpm then runs on two cylinders, back fires & dies completely. Will start again &...


the only other things I can think of mate without looking, is put your hand over the silencer at tickover (when engine cold) and see if the the exhaust is blowing from somewhere. A new gasket should sort that. If you dropped it on the timing cover side it might be worth a look in there to see if there is any damage.
good luck
Dan

Sep 03, 2009 | 2002 Triumph Speed triple

2 Answers

2001 XL1200S Cuts out and dies at highway speeds for a moment


Did you put a new battery in it? If not have it load tested and replace if needed. Check the grounds and make sure they are clean and tight. Check the stator by going to the plug on the right front down tube, with a muti meter take a reading with the bike running on the side that goes back toward the engine, I forget the values but you should get a reading at idle and then as you rev the motor the reading should climb. If all of the above check out OK the problem will be your voltage regulator.

May 17, 2009 | 2000 Harley Davidson XL 1200 S Sportster...

Not finding what you are looking for?
2003 kawasaki KX 125 Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...