At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ENGINE 2 stroke single cylinder direct reed valve crankcase induction Liquid cooled 125 cc engine Cylinder size 124 8 cc Bore and stroke 54 x 54 5 mm 200 cc engine Cylinder size 175 3 cc Bore and stroke 64 x 54 5 mm 250 cc engine Cylinder size 247 7 cc Bore and stroke 72 5 x 60 mm 280 cc engine Cylinder size 272 2 cc Bore and stroke 76 x 60 mm 300 cc engine Cylinder size 294 1 cc Bore and stroke 79 x 60 mm I Cant put periods or commas so bare with me
If you say it is definately sleeved it should be possible to bore it, you normally get one or two oversizes before it needs resleeving. If you are able to buy an over size piston from kawa or wiseco, chances are it can be bored.
hi mate gear oil wise you need light gear oil i reccomend silkolene,motorex,morris,rock oil for 2 stroke wise you need to buy a mixing bottle of ebay or something with a ratio of 32/1 and i use silkolene comp 2 premix competition oil descent stuff its 10 pound for 1 litre
The cylinder bore is just that > the bore size of the cylinder. The piston clearance should be 0.0015 to 0.003. Anything more than .005 and the piston is too loose.
×