Question about 1983 kawasaki Csr 1000

1 Answer

Twisted crank dissembly of motor,too replace twisted crank

Posted by on

  • bazzz7071
    bazzz7071 May 11, 2010

    Hello exactly what do you want to know?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 342 Answers

Replacing the crankshaft you will need to do complete engine tear down.
If your mechanically inclined and you have the tools and must needed service manual go for it.
Remove the engine and make sure you have an area to lay out your motor parts so you do not mix nuts and bolts in one big pile,start at the top removing the valve cover and work down, keeping your top end parts in their grouping ( valve cover with their bolt,cams and cam bolts together,head and head bolts and do not mixup your cam bearing caps ) your going to have a lot of bolts try not to mix them up.
Good luck but get a manual this would take days to walk you through it.

Posted on May 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Water coming out of exhaust

Did you line up the timing marks before taking of the head and made sure that they were the same when reassembled
Water in the exhaust take out spark plugs and fill up cooling system and crank engine to see if water shoots out the holes if so
Liners need to be checked for cracks or you have a twisted head which may need skimming or replacement
Most overheated motors need a major strip and rebuild as we need to be very lucky to get away with a gasket replacement only and not rip all the bearings in the motor to pieces and piston rings

Dec 11, 2015 | 2001 Chevrolet Malibu

1 Answer

Dissemble pump motor from impeller

The impellers screw on. Hold motor shaft and unscrew.

Oct 08, 2014 | Goulds Pumps Goulds Centrifugal SS Pump &...

1 Answer

Replace bearings

the bearings is in the center take of the center part all the way to the bearing dont need to dissemble the drum.

Apr 16, 2014 | LG WM2075C Washer

1 Answer

My dvd recorder has a DVD stuck in it and it's displaying U99. How do I get it out? Thanks.

Just dissemble your Player to get disc back. Please check mechanism gear and its motor for malfunction and replace it if necessary.

Jan 24, 2011 | Cameras

1 Answer

Why does my ceiling fan suddenly not work? the lights on it work, we replaced the batteries inthe remote, but still nothing ??

Hello :

It seems that the motor armature is burn .
If you can fix it by yourdelf , then dissemble the unit, remove the motor. Loosen the bolts running from end to end of the motor and with emery cloth, clean the small metal plates on the ehd of the armature. They should be bright copper color. If the armature is burnt, they will be dull brown. The other thing is to replace the brushes in the motor .

Or you can call for an electrician to solve the problem . This shouldn't cost more than 30 $ to be fixed .


good luck .

Apr 07, 2010 | Dryers

2 Answers

My passager side windshield wiper doesnt work but the driver side does what is the problem

The windshield wipers are moved by a system of rods and links with a motor that has a crank on it. A rod goes from this crank to each of the wiper arm cranks. . Sometimes on older cars, the bearing that the wiper arm shaft lives in will get corroded and hard to twist. When it gets really hard, it will actually stall a wiper motor, but sometimes the motor is strong enough to make the link rod pop off of the crank, depending on how the unit is made. . You'll need to get under there and look at this system and see what is hooked up. Check for the freeness of the wiper arm (is it easy to twist back and forth with your hand?) If it is free, reconnect or replace the defective ball joint on the end of the link arm for that wiper arm.

Nov 25, 2009 | Dryers

1 Answer

How do i remove the pin on the crank pulley

Why do you want to remove the crank pully pin? Anyway, to remove this pin, you need to remove the pully first. afterward, you can use a pair of vice-grips to twist the pin out. However, not advisable. You should leave the pin there as it helps stabilize the crank pully & keeps it from turning on the crankshaft.

Oct 07, 2009 | Hyundai Motor 2004 Sonata

3 Answers


the best way is to buy one to see what it looks like, it will be easeir to find, it usally on the lower part of the motor

Oct 03, 2009 | 1994 Chevrolet Camaro

1 Answer

Series 90 washer,replaced coupling , now motor is getting hot !

You can use the following link, for an explanation on how to remove the agitator:

With the upper agitator assembly removed, grasp the lower flange and lift straight up.

Let me know if you still have further questions.

Feb 02, 2009 | Washing Machines

Not finding what you are looking for?
1983 kawasaki Csr 1000 Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4533 Answers


Level 3 Expert

76630 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides