Question about 2002 Yamaha YZF-R1

1 Answer

Fitting cowlings i,m fitting the cowlings on to my 02 r1 & need to know all bolts,screws & clips sizes thanks for any advice given cheers bill

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,748 Answers

Hi, Tom for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Timelapse R1 fairings removal
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals
Yamaha R1 Performance upgrade 1

Posted on Sep 03, 2016

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

raffaiel
  • 209 Answers

SOURCE: Will 2000 Yamaha R1main switch (iginition) fit an R6?

if the wiring diagram where the same it will work.

Posted on Apr 15, 2009

edwar355
  • 71 Answers

SOURCE: paint code r1 02 silver

the paint code is 0791 its called silver #3(S3) ColorRite top 5175-2
Hope this helps

Posted on Feb 17, 2010

  • 123 Answers

SOURCE: would a 02 yamaha R1 exhust fit a 01 yamaha R1?

No, the 01 and 02 are different. The 2000 and 2001 will fit and the 2002 through 2005 will fit. Sorry...

Posted on Jan 27, 2011

bonedivers
  • 1140 Answers

SOURCE: The three bolts that hold

http://www.repairmanualclub.com/motomanuals/

Posted on Jul 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a fairings bolt diagram for 2008 yamaha yzf-r1


You can always go to a parts site to see loosely how things fit together. I am including a link to a part site below and also a link to a DIY that requires removing Cowling 2 with pix. This should help you.

Cowling 2 Diagram

Spark plug DIY

Apr 03, 2013 | 2008 Yamaha YZF-R1

2 Answers

Skilsaw 5380 blade installation problem.


Don't know exactly, but on amazon you can find user manual. here Skil Circular Saw Model 5350 Owner Manual Operating Guide Paperback 1988 . Hope this was helpful. cheers skilsaw-5380-blade-installation-problem-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg

Jan 20, 2013 | Skilsaw 5380 Circular Saws

1 Answer

I am trying to replace the speed sensor and cant get a wrench on the bolt . what size socket ,wrench fits or is there a special tool that i need


Hello: There should be a 10mm bolt head that holds a clip. This clip keeps the speed sensor in place. Use a 10 mm wrench, socket to remove bolt/screw.

Aug 06, 2011 | 2004 Chevrolet Impala

1 Answer

Where is the ecm located


back of the engine compartment on passenger side:

Removal & Installation

3.0L (VIN S) Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Park the wiper pivot arms in the highest position on the glass.
  3. Disconnect the battery ground cable.
  4. Remove the three RH cowl panel clips and remove the RH cowl panel.
  5. Remove the clip on the water shield.
  6. Remove the three RH water shield screws and remove the RH water shield.
  7. Disconnect the powertrain control module (PCM) electrical connector and remove the gasket.
  8. Remove the retaining bolts and the PCM.
  9. To install, reverse the removal procedure.

3.0L (VIN U, 2) Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Park the wiper pivot arms in the highest position on the glass.
  3. Disconnect the battery ground cable.
  4. Remove the three RH cowl panel clips and remove the RH cowl panel.
  5. Remove the clip on the water shield.
  6. Remove the three RH water shield screws and remove the RH water shield.
  7. Disconnect the evaporative emission (EVAP) canister purge valve return tube at the intake manifold and position aside.
  8. Disconnect the powertrain control module (PCM) electrical connector and remove the gasket.
  9. Remove the retaining bolts and the PCM.
  10. To install, reverse the removal procedure.

May 13, 2011 | 2002 Ford Taurus

1 Answer

Would a 02 yamaha R1 exhust fit a 01 yamaha R1? hanrahanmick@hotmail.com


No, the 01 and 02 are different. The 2000 and 2001 will fit and the 2002 through 2005 will fit. Sorry...

Jan 26, 2011 | 2001 Yamaha YZF-R1

1 Answer

How new of a motor can go on a 2002 yamaha yzf r1?


i know that the 02-03 models are completely compatible but if you know guys like i know...you can rearrange bolt patterns and make later models fit....maybe difficult but it can be done.

Nov 20, 2010 | 2002 Yamaha YZF-R1

1 Answer

Where is the. 2001 Ford Taurus Engine Computer ECM locate


It's in the engine compartment, back passenger side, under cowl. here are instructions from autozone.com:


Removal & Installation
3.0L (VIN S) Engine

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Park the wiper pivot arms in the highest position on the glass.
  3. Disconnect the battery ground cable.
  4. Remove the three RH cowl panel clips and remove the RH cowl panel.
  5. Remove the clip on the water shield.
  6. Remove the three RH water shield screws and remove the RH water shield.
  7. Disconnect the powertrain control module (PCM) electrical connector and remove the gasket.
  8. Remove the retaining bolts and the PCM.
  9. To install, reverse the removal procedure.

3.0L (VIN U, 2) Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Park the wiper pivot arms in the highest position on the glass.
  3. Disconnect the battery ground cable.
  4. Remove the three RH cowl panel clips and remove the RH cowl panel.
  5. Remove the clip on the water shield.
  6. Remove the three RH water shield screws and remove the RH water shield.
  7. Disconnect the evaporative emission (EVAP) canister purge valve return tube at the intake manifold and position aside.
  8. Disconnect the powertrain control module (PCM) electrical connector and remove the gasket.
  9. Remove the retaining bolts and the PCM.
  10. To install, reverse the removal procedure.

Oct 15, 2010 | 2001 Ford Taurus

1 Answer

Need a new tensioning screw for a model 111174-01 Rem. chainsaw


Your model number is a dead end. use 107625 (it includes yours). I think this is what you need.
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx
  • Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
  • Click the "YourModelNumber" - Remington Electric Chain Saw "View Model" link.
  • Click "View Owners Manual" or "View Illustrated Parts Diagram" link.
    • Type "YourPartNumber" into the "Search for your parts by Part #:" window, then click search.
A tension repair kit is available here:
MasterParts.com
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=108640-MD
Part number 108640-MD; DESA SPECIALTY PARTS: KIT, ADJUSTMENT SCREW FOR SPROCKET COVER (REM-18); $5.95.
Kit fits the following covers: 108640-01, 116675-01 and 108641-02 (note: for the 108641-02 the screw will adjust from the front with a screw driver, not with a thumb screw at the back) KIT INCLUDES: screw, clip & adjustment block.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Apr 19, 2010 | Remington 16" Electric Chain Saw

2 Answers

I have a 2008 impala and need to change the cabin air filter. However, I don't know how to remove the clips to remove the plastic under the wipers.


1. Put windsheild wipers in up position.
2. Remove the weather stripping from the passenger side cowl.
3.Unclip the wiper fliud hose.
4.Unscrew and remove fitting on sides of cowl.
5.Remove center screw cap
6.Take out the cowl cover. You may need to use a flat head screw driver to help it along.

Mar 13, 2010 | 2008 Chevrolet Impala

1 Answer

The wiper blade connection has released from the wiper blade motor bar that controls the wipers movement. You can hear the motor working but the arms have been disengaged.


please rate as fixya if this is what you need. Mounting Arm and Pivot Shaft —Windshield Wiper Removal
NOTE: The windshield wiper pivot arms (17526) must be in the highest position to remove them.
  1. Turn the ignition switch (11572) to the on position.
  1. Turn the windshield wiper (17500) on.
  1. Stop the windshield wiper pivot arms at the highest position by turning the ignition switch off.
  1. Remove the windshield wiper pivot arm.
    1. Remove the pivot arm nut cover.
    1. Remove the nut.
    1. Remove the windshield wiper pivot arm.

  1. Raise and support the hood (16612).
  1. Remove the cowl grille seal.
NOTE: The two cowl grilles overlap at the center. The LH cowl grille must be removed first.
  1. Remove the LH cowl grille.
    1. Remove the screw cover.
    1. Remove the screws.
    1. Remove the clips.
    1. Remove the pin-type retainer.
    1. Remove the LH cowl grille.
6a042b2.gif
  1. Remove the RH cowl grille.
    1. Remove the screw cover.
    1. Remove the screws.
    1. Remove the clips.
    1. Remove the pin-type retainer.
    1. Remove the RH cowl grille.
bfba69b.gif
  1. Remove the mounting arm and pivot shaft.
    1. Disconnect the electrical connector.
    1. Remove the bolts.
    1. Remove the mounting arm and pivot shaft.
8169c1e.gif

Mar 14, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2002 Yamaha YZF-R1 Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...