Question about 1985 Yamaha FJ 1100

1 Answer

Fairing removal how do you start to remove the top fairing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

Most if not all the connectors will have a Phillips head on them. Removal is not difficult but follow these tips and re-installation will go smoother. You do not have to remove the gauges or the ignition nor separate the windscreen from the fairing to remove the fairing. Get out you digital camera(any camera will do) and take frequent pictures as you remove fasteners. If you are unfamiliar with the correct re-installation location use a divided container and label the correct location. There is no trick to remove the fairing. If it won't move after removing the fasteners you most likely have missed some. Follow the pictures for re-installation.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 electra glide front faring removal


1993/1994 Outer Fairing and Windshield for FLHTC, and FLHTC ULTRA

Removal

First remove the headlight assembly and the bolts, nut and the washers attaching the outer fairing piece to the windshield and inner fairing piece. THEN loosen the four bolts attaching the light bracket and the outer fairing piece to the fork brackets. Remove the upper bolts but leave the lower ones in place. Cover the fender. THEN rest the lower light bracket onto the fender. THEN remove the fastener securing the headlamp trim ring and remove the trim ring. THEN remove five screws that secure then headlamp assembly to the outer fairing and remove the headlamp assembly. THEN reach through the headlamp opening and loosen four locknuts on the two studs on each side of the headlight area which attach the fairing to the metal brackets inside the fairing. THEN remove the fairing by pulling it straight ahead away from the brackets.

Installation

First loosely position the outer fairing in place over the inner faring with the four studs going into the two brackets. Then install the five windshield fasteners through the outer fairing, the windshield and the inner fairing. THEN tighten the four stud nuts to secure the fairing to the brackets, being sure to have the inner and the outer fairing properly aligned at their outside edges. THEN position the light bracket so that the slots fit around the upper fork bracket bolts and thenalign the lower fork bracket mounting holes and replace the two lowering fairing mounting bolts through the light bracket and the outer fairing and the inner fairing and screw them into the lower fork bracket. THEN make sure that the rubber seal around the inner fairing is properly seated and not pinched and tighten the four fairing attachment bolts to 12-13 foot pounds (16 -19 Nm). THEN tighten the windshield screws to 4 inch pounds (0.45 Nm) but no more than this amount starting in the middle and working outwards on both sides. THEN reinstall the headlight assembly.

Jun 03, 2014 | Harley Davidson FLHTCUI Electra Glide...

2 Answers

Where are the fuses located on a 1997 fireblade


Hi Steve,normally the fuses are situated under the right side dash cover. The cover is next to the fuel tank and top fairing cowl,normally two bolts to remove cover.

Apr 08, 2014 | Honda Motorcycles

1 Answer

How do you remove the fairing on a R2003 BMW CLC


I HAVE NO PICTURES. BUT I WOULD START TO RELEASE THE BOLTS FROM THE BOTTOM UP TO THE TOP FAIRING ATTACHMENT.

Apr 15, 2013 | 2003 BMW R 1200 CL

1 Answer

How do I remove the top fairing on a Ducati 1198


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Ducati despair, not for a mere $20 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
ducati 848 fairing removal
Ducati 1198 1198S Service Manual Workshop 2009 Download Manuals Technical
Ducati OEM Parts Fiche Lookup and Online Ordering
Ducati Maintenance

May 24, 2012 | Ducati Motorcycles

1 Answer

Removing fairing on '93 harley davidson electra glide?


Hi Ben, for more information about your question please visit the websites below. Good luck and have nice day.
Remove and install Harley Davidson Touring outer front fairing Law Abiding...

Jan 31, 2012 | Harley Davidson Motorcycles

1 Answer

Magtag series 3000 Error F 71 Flashing. Will not respond to shut-of or start.. What do you do?


Hi, F71 is a "heatbeat failure" which means that your front interface control board is shorted and will need to be replaced. it's actually fairly easy to replace and can definitely be done by yourself. To access the part, just pull the unit forward and remove the 3 screws coming in from the back of the top panel. Remove the top panel by pulling it back, up, and off. Then remove all the screws going into the top of the control panel. Remove the dispenser drawer and remove the screws coming in through the dispenser. Remove the screws coming from the inside of the dryer going forward into the control panel, then remove the control panel (it's just clipped in on the bottom. After that you can disconnect the wire harnesses to the front interface control board and replace that part.

May 15, 2011 | Maytag Washing Machines

2 Answers

How easy is it to replace my fork seals on my 1993/4 900 trophy?


I found it easier to remove the forks and take them to a shop to have the seals done.In doing this you are still saving a bucket load of money. Removal of the forks takes about an hour and a half and is relatively easy without any specialist tools. You only have to remove the top part of the fairing.

May 10, 2011 | 1994 Triumph Trophy 900

1 Answer

How to change handle bars


HANDLEBAR REMOVAL

1. Remove maxi-fuse.


REMOVAL



1. Remove left side saddlebag.




2. Gently pull side cover from frame downtubes (no tools



required).



3. Depress latches on maxi-fuse holder and then slide



cover rearward to disengage tongue from groove in fuse



block cover.



4. Pull maxi-fuse from maxi-fuse holder.

2. Place blanket or protective cover over front of fuel tank to

protect against scratches or other damage.



FLHR/C/S:

Remove the handlebar clamp

(FLHR/C/S), NACELLE REMOVAL (FLHR/C), steps 1-

11, or NACELLE REMOVAL (FLHRS), steps 1-7.


WINDSHIELD/HEADLAMP NACELLE (FLHR/C/S) 2.31


WINDSHIELD REMOVAL
Standing at the front of the motorcycle,

use a finger to raise the wireform latch springs on


both sides of the windshield.


2. Gently pull on the top of the windshield until the upper


notches on the windshield brackets are free of the upper


grommets.


3. Carefully raise the windshield until the lower notches are


free of the lower grommets.


4. Remove windshield from motorcycle.


WINDSHIELD INSTALLATIONTo avoid scratching headlamp nacelle or auxiliary lamp


bracket, be sure that all four notches on the windshield


brackets are firmly seated on a rubber grommet.


1. Standing at the front of the motorcycle, carefully insert


the windshield brackets between the headlamp nacelle


and the auxiliary lamp bracket. Lower the windshield into


position until the lower notches on the windshield brackets


are seated on the lower grommets.


2. Gently push the top of the windshield toward the rear


until the upper notches fully engage the upper grommets.


3. Push down on the wireform latch springs, so that they


overhang the rubber grommets. If some adjustment is


necessary, loosen the retaining screws and rotate the


latch springs into the proper position.


NACELLE REMOVAL (FLHR/C)


1. Remove the windshield. See WINDSHIELD REMOVAL


on this page.


2. Remove the Phillips screw at the bottom of the headlamp


door (chrome ring). Remove the headlamp door.


3. Remove the eight Phillips screws to free the headlamp


housing from the headlamp nacelle.


FLTR:

Remove the instrument nacelle.

UPPER FAIRING/WINDSHIELD (FLTR), INSTRUMENT

NACELLE, REMOVAL.

FLHT/C/U:

Remove the fairing cap.

Remove the outer fairing as follows:


a. Standing at the front of the vehicle, use a T27 TORX


drive head to remove the three outer fairing screws


(with flat washers) just below the windshield.


b. Moving to the inner fairing side, remove the two fairing


screws just above the wind deflectors on the left


and right side.


c. Turn the handlebar to the right and remove the outer


fairing screw reaching in below the left side of the


fairing cap. Turn the handlebar to the left and


remove the fairing screw below the right side of the


fairing cap.


d. Tilting the outer fairing toward the front, squeeze the


two external tabs to remove the wire connector at


the back of the headlamp assembly.


e. Lift the fairing (with headlamp assembly) off the


motorcycle.Since the outer fairing screws hold the windshield in


place, the windshield may fall to the floor if not removed.


UPPER FAIRING/WINDSHIELD (FLHT/C/U), FAIRING

CAP, REMOVAL. Remove the radio (or storage box).



4. Remove the left and right handlebar switch controls..

5. Remove upper handlebar clamp screws (with flat washers).

Remove upper handlebar clamps and handlebar.

HANDLEBAR INSTALLATION


Just reverse for install. This is all from the maunual and I hope it helps you.



Nov 25, 2010 | 2005 Harley Davidson FLHTC - FLHTCI...

1 Answer

Do I need to remove my fairing to replace the headling bulbs?


Hi there,

well you can please follow the below steps -

Remove the Fairing - 1. Unscrew all seven outer fairing fasteners using a Torx driver. These screws are located on the inner fairing near the windshield, the speakers, and the handlebar clamps.
2. Stand in front of the motorcycle. Tilt the outer fairing toward you and hold it firmly. Reach in and disconnect the wire connectors for the headlight assembly by hand.
3. Move the fairing to a work bench to continue the procedure.

Change the Headlights - 1. Remove the wire harness connectors from the back of each headlight that need replacement. Turn the plastic retainer counterclockwise by hand to remove each bulb from its housing.
2. Install the new headlight bulb or bulbs, with each bulb's wider ears on the bulb back plates oriented toward the top. Screw in the plastic retainer rings by hand.
3. Connect the headlight wire harness connectors to the back of each headlight.
4. Move the fairing back to the motorcycle. Reinstall the fairing, battery and seat in reverse order.
Please post comments if you need more help or information.........

Good Luck!!

Thanks

Mar 17, 2010 | 2004 Harley Davidson FLTRI Road Glide

1 Answer

Pride victory mobility scooter


18bc1b5.jpg
1. Remove the four screws on the outside perimeter of the console base.
2. Lift off console top cover and disconnect the front-to-back cable.
3. Remove the throttle lever from the throttle pot.
Remove the four screws holding the console base to the mounting plate.

Oct 23, 2008 | Pride New Mobility Legend 4 Wheel Scooter

Not finding what you are looking for?
1985 Yamaha FJ 1100 Logo

Related Topics:

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...