Question about Suzuki GSX 1100 F (Katana Motorcycles
The choke cable (or push-rod if fitted) attaches to a bar which actuates all 4 carbs. It is located at the top rear of the carbs & is very unlikely to get damaged during a fall as it does not protrude beyond the left carb.Check it is not bent or pulled away from the choke plungers. Check also that the cable is sitting properly in its housing on the carbs.
The choke lever on the handlebar may be damaged, or the choke cable may be broken
The most likely cause of not starting after a fall is where the carbs have over flowed causing the engine to flood & the plugs to foul (get wet); clean thoroughly & dry with heat, check for a spark by attaching plug to cap & placing the electrode end on the head
DO NOT TURN ENGINE OVER WITHOUT ALL PLUGS BEING EARTHED
If no spark & the plugs are black at the base of the middle electrode try new plugs
This should be all you need
Please mark this as very helpful (if it has been!!)
Posted on May 01, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 07, 2017 | 1989 Suzuki GSX 750 F (Katana)
Nov 18, 2016 | 1996 Suzuki GSX 750 F (Katana)
Mar 15, 2013 | 1990 Suzuki GSX-R 750 L
Jul 28, 2017 | 1997 Suzuki GSX 600 F (Katana)
May 10, 2017 | 1990 Suzuki GSX 600 F (Katana)
Jun 09, 2010 | 1992 Suzuki GSX-R 750 WN
Jul 15, 2009 | 1990 Suzuki GSX 1100 FK (Katana)
Jun 21, 2009 | 1990 Suzuki GSX 750 F (Katana)
Apr 28, 2009 | 1990 Suzuki GSX 1100 FK (Katana)
Mar 21, 2009 | 1990 Suzuki GSX 1100 FK (Katana)
Jun 07, 2015 | Suzuki VL 125 Intruder LC Motorcycles
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: