Question about 2006 Husqvarna TE 450

1 Answer

2006 te 450 husqvana

Indicators stopped working, pulled front light cover off and found condute with 2 wires, 1 red and 1 black, they appear to be broken off from somewhere but i looked every where and cant find what they join too. wondering if a flasher can has broken off or something like that cause when you touch wires together it lights the indicator. regards geoff

Posted by on

  • zomra1 May 11, 2010

    Here is your solution » Honda »
    Suzuki » Yamaha » kawasaki » Others a

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Husqvarna Master
  • 1,508 Answers

If you cant find the flasher that may be the problem, check they arnt broken of the dash indicator light

Posted on May 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring for 2005 sprinter tow bar


1=yellow wire left hand indicator 2=blue wire reverse lights 3= white wire earth to ground 4= green wire right hand indicator 5=brown wire side light 6= red wire stop lights 7 =black wire side lights

Mar 19, 2011 | Mercedes-Benz Sprinter Cars & Trucks

1 Answer

HOW DO I CONNECT TO POWER SUPPLY? WHERE DO THE WIRES GO?


You posted under Intermatic EI210 countdown timer.
To confirm this is your product, open link below:
http://www.amazon.com/Intermatic-EI210-Electronic-Countdown-Minutes/dp/B001EE1J74
Manual with operation instructions appear on link below
http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/ei220w%20-%20english.ashx

EI210 replaces single-pole switch only.
Single pole switch is where 1 switch controls the Load (light, fan, motor)

To wire this timer:
1) Single-pole switch has 2 insulated wires and 1 bare ground wire.
2) Connect insulated switch wires to timer red wire and timer black wire, in either order for now.
3) Connect timer green wire to bare ground wire.
4) In back of electric box are white wire that are twisted together and covered with wire nut. Connect timer white wire to these wires. This will power electronics located inside the timer.
5) If electric box does not have white wires described above, then connect timer white wire to bare ground wire along with green wire.
6) Turn power ON. Press oval button. If indicator light turns ON, then timer is wired correctly. If indicator light does not come on, then reverse timer black wire and timer red wire.
http://waterheatertimer.org/How-to-put-on-wire-nut.html

Add a comment if you need more free help.
Also take advantage of fixya phone service.
For a price, fixya expert gives you same instructions shown above via phone while you connect the device.

Dec 30, 2010 | Intermatic EI210 Electronic Auto Shutoff...

1 Answer

How do you wire a 3-wire timer switch (white, black, red) to replace a single light switch to a front door light?


You have a 3 wire in-wall timer.
Colors red black white

You are replacing single pole switch that has 2 wires (plus ground, we'll ignore ground for now)

So switch has 2 wires:
1 switch wire goes to Load/lights > this wire connects to timer red wire
1 switch wire is Hot from breaker > this wire connects to timer black wire
When finished, if lights do not turn on, then reverse red and black wires.

Timer white wire powers clock inside timer.
To complete circuit to clock, white wire is connected to neutral wires.
Located in back of electric box are white wires twisted together and covered with wire nut.
These wires are neutral, connect timer white wire to these wires.

If box does not have neutral wires described above, connect timer white to bare ground wire.
Add a comment any time

Dec 10, 2010 | Hardware & Accessories

1 Answer

I bought A Stanley 450 jump start & I'm to charge it for 24hr. The 2 red lights are on but the green light is still blinking after 14hr. What does the blinking light mean?


not sure if you found this yet but it is actual made by Baccus Global under the stanley name.

http://www.baccusglobal.com/faq.php


Q: How do I know when my Jump Starter is fully charged?
A: All of the Baccus Global jump starters have a battery status indicator, units can have 2 - 4 LED indicators when all of them illuminate and the green one flashes the unit is fully charged.

Dec 05, 2010 | Black & Decker Jump Start System 450 Amp...

1 Answer

I purchased the Legrand RT1 Time Switch to run a bathroom fan. It is installed and I see indicator lights. Every time I turn the fan on, it runs for a second and stops (hearing clicking in the switch);...


You connected red and white wires together.
No problem, nothing burned out, and it's simple to fix. Steps below.

RT1 is electronic countdown timer, and electronic timer clock inside needs separate circuit, just like your alarm clock needs to be plugged in. >> that's why timer has white wire. White wire completes circuit to timer clock.

Manual says:
Timer-black-wire to Hot; Timer-red-wire to Load (lights)
Timer-white-wire to Neutral.
Heres what to do
1) Timer-green-wire connects to bare ground wire.
2) Switch has 2 wires. Take switch wires and connect them to timer-black-wire and timer-red-wire. Choose either one for now.
3) In back of electric box are white wires twisted together and covered with wire nut. Connect timer-white to these wires.
4) If electric box does not have white wires described above, then connect timer-white to bare ground.
5) Turn on electricity, and push countdown button. If lights come on, timer is wired correctly. If lights do not come on, then reverse timer-red and timer-black wires.

Nov 27, 2010 | Pass & Seymour / Legrand RT1-W 10-20-30-60...

1 Answer

I need to find the diagram for the wires of the car stero AM/FM Cassette 1999 Ford Ranger XLT


1999 Ford Ranger Pickup Car Stereo Radio Wiring Diagram.
Car Radio Constant 12V+ Wire: Light Green
Car Radio Switched 12V+ Wire: Yellow/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Light Blue/Red
Car Radio Dimmer Wire: N/A
Car Radio Antenna Trigger N/A
Car Radio Amp Trigger Wire: Blue
Front Speakers Size: 6 1/2′
Front Speakers Location: Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): Dark Green/Orange
Right Front Speaker Wire (-): White/Light Green
Rear Speakers Size: 5′ x 7′
Rear Speakers Location: Side Panels
Left Rear Speaker Wire (+): Gray/Light Blue
Left Rear Speaker Wire (-): Tan/Yellow
Right Rear Speaker Wire (+): Orange/Red
Right Rear Speaker Wire (-): Brown/Pink


pls rate

Aug 17, 2010 | Buck Ford Econline Van 1998-2006 Stereo...

1 Answer

My brights quit working. My headlights work fine on my 2006 Chevy Equinox


Most of the time I find that both headlight bulbs are burned out. Remove the headlamp, open the hood and remove the retainers that hold the front grill/bumper cover to the upper radiator support. The gently pull out on the front bumper cover that goes over the headlamp to release the retainer and cover retainer with tape to avoid scratching the headlamp lens. remove the 3 bolts that hold the headlamp in place 2 at the top and one down at the bottom of the headlamp on the inboard side. Pull out on the outboard bottom part of the headlamp to release the retainer. Disconnect the headlamp bulb ck for power and ground at the headlight bulb connector. Use a test light and ck the red and white wire voltage and the d blue and pnk wires for ground. The high beam is the pink wire.So connect your test light from the pink wire to the red and white wire and turn on the high beam headlights your test light should light if it does then the bulb is burned out.

Feb 15, 2010 | 2007 Chevrolet Equinox LS New Cars

1 Answer

Vehicle: '97 Nissan PU, alternator


ok we have four connections at the alternator( black wire is ground) (white with blue positive direct from the battery)
and two wires connector in the regulator(yellow with black that goes to charge indicator the red light and goes to fuse 7 10a fuse block inside) the blue with yellow goes to fuse 65- 7.5a in the left fron engine comparment fuse box))#1 check for ground at the black wire= #2 check for positive at the white with blue wire (allwas with power) this wire is protected with 100a fuse is in the left front engine comparment fuse box,
remenber== check the 100a fuse
and the two fuses that protect the regulator.
when you turn the ignition switch to the on position power goes to the alternator by the yellow black wire and activate
the alternator to work.

Mar 13, 2017 | 1997 Nissan Pickup

2 Answers

ERROR CODE "TE"


The MOSt common reason for a "tE" error code is the temperature of the hot water from the hot water heater is greater thant 145 degrees (F)
Adjust your hot water heater down and measure the temp at the kictchen tap.
Good Luck!

Aug 26, 2008 | LG 24 in. LD-12BS6 Stainless Steel...

Not finding what you are looking for?
2006 Husqvarna TE 450 Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

venugopal durairajan

Level 3 Expert

464 Answers

choprboz5

Level 2 Expert

196 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...