Question about 1997 Suzuki GSF 600 S Bandit

1 Answer

I have serviced my 97 600 bandit s. had to

I have serviced my 97 600 bandit s. had to replace the sump nut took sump pan off cleaned everything put back together filled with 3.3 litres of oil new plugs filter etc bike started but died after 2 mins. now it wont start. help

Posted by on

  • matthews_eam May 02, 2010

    HI. CLEANED ALL THE WIRING CONNECTIONS WITH CONTACT CLEANER. CLEANED ALL FUEL AND AIR LINES. BIKE RUNNING SPOT ON NOW. THANKYOU.

  • yadayada
    yadayada May 11, 2010

    did u disconnect any wiring?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 342 Answers

Hello if you had the fuel tank off make sure you did not hook up the vacuum line to the fuel outlet and fuel line to the center fuel petcock vacuum connection

Posted on May 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace gaskets


There are gaskets all over the place such as one under the valve cover, one around the tranny pan, one around the oil pan. The process is similar though. You remove all the nuts and use caution to carefully scrape off all of the old gasket WITHOUT scratching the metal surface. Get the surface nice and clean, take the old gasket and make, model and year of your car to the auto store, get a new gasket which is relatively inexpensive, put it on and then replace the pan or valve cover and then all of the nuts. It is best if you have a torque wrench so that you tighten all nuts to manufacturers specifications (not one lose and one real tight). This will help prevent it from leaking in the future. Sometimes some people use a tube of gasket maker. We don't like the stuff, we prefer to replace what we took out.

Jan 05, 2015 | Cars & Trucks

1 Answer

I have a 99 Dodge Ram - automatic . I can shift into any gear, but it won't move forward unless I put it in low 1. When I get to 10 mph I can shift into drive and it drives fine. No slippin


Sounds like it needs new valve kits, and or a major overhaul, try checking selector linkages are lined up and tight, otherwise, if it has access to the sump pan then, drain fluid, take pan off carefully, look to see a nut threaded over a locking screw, hold screw with screwdriver and loosen nut anti clockwise, once loose, hold nut and turn screw inwards counting how many turns until all the way in and note this number, then turn 5 full turns out, hold screw and tighten nut, replace with new oil, check pan for filings, note and clean refit sump pan.

Dec 09, 2014 | Dodge Cars & Trucks

1 Answer

How do you replace a oil pan on a 02 kia sportage?


Jack up car put on stands remove exhaust if it crosses under sump remove all the screws or nut bang side of sump with a rubber hammer to break seal,clean off old sealer.

Aug 15, 2014 | 2002 Kia Sportage

1 Answer

Dropped a 8mm nut into intake manifold took manifold back off cant see the nut drained oil still dont see it next thinking of takeing off oil pan what do you suggest


if you dropped this nut into the inlet manifold then i would suggest you look in the head ports ,if its not their then it could have gone down into the sump and if it has then dont worry about it ,so long as its not stuck in the manifold on some oily substance then its ok ok behind a valve stem your safe it will lay in the sump and not cause any damage ,some vehicles have a magnetic sump plug so it will stick to this eventually .

Apr 13, 2012 | 2001 Ford Windstar

1 Answer

I have 97 bandit 1200. Do not have owners manual, Where is oil drain bolt located?


what your looking for is the sump nut and is located right under the engine cant mis it is a size 17 nut and as i said is noticeable

Feb 15, 2011 | 1997 Suzuki GSF 600 S Bandit

1 Answer

Were are the nuts or nut to change the oil on the sump on a hyundai 97 sports wagon


Locate the oil pan on the bottom of the engine. You will need to raise the vehicle in order to crawl underneath it. Be sure to use jack stands to hold the vehicle up. The drain plug will be on the bottom of the oil pan near the rear of the pan. Do not confuse the oil pan with the transmission. I don't think the transmission pan has a drain plug, but I could be mistaken. Some vehicles do have drain plugs on the transmission sump.

Dec 20, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

How to change the oil on a Volvo 2004 XC70?


remove the cover thats under the engine and put an oil pan under the sump nut then remove the sump nut and let the oil fill your oil pan {make sure the oil pan can hold at least 5.5ltr of oil} then remove the oil filter its on the top of the engine inside a housing that has a big black plastic nut on it then fit your new filter put your sump nut back in and fill with oil untll your dip stick is reading full.

Mar 13, 2010 | 2004 Volvo XC70

1 Answer

Cracked sump


no the oil pick up is differant

Jun 15, 2009 | 1998 Suzuki GSF 1200 Bandit N

2 Answers

Oil plug


Bottom of oil pan...underneath the bike. Approach the undercarriage from the leftside of the bike, so you will not have to deal with the exhaust pipes. Remember to change your oil filter with every other oil change.

Nov 10, 2008 | 2004 Suzuki GSF 1200 Bandit N

Not finding what you are looking for?
1997 Suzuki GSF 600 S Bandit Logo

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...