Question about 2007 Sherco 5.1i

1 Answer

WHERE DO DO YOU PUT THE 2 STROKE OIL MIX IN A SHERCO SM50

Where do you put the 2 stroke oil mix in a sherco sm50 is it directly into the tank

Posted by on

  • pow_what May 11, 2010

    does this use mis with fuel or oil injected?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 311 Answers

Hi i dont know these bikes personally but,they will have a seperate tank for the two stroke oil,you will probably find it behind one of the side covers,do not put it directly into the fuel tank,that will cause all sorts of drama,as the oil(being heavier than the fuel)will sink straight to the bottom of the tank,fill the carb with oil,then you will never get it started,hope this helps...cheers

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 Honda 125cc was told to mix gas but these oil in crankcase do I need to mix?


You would never mix any fuel and oil for the crankcase. If it is a 2-stroke engine, the fuel and 2-stroke oil will need to be mixed before entering the cylinder. Some engines have an automatic mixing setup - those have a separate oil reservoir for 2-stroke oil, but it will usually be a plastic tank, located nowhere near the crankcase. On a "4matic" engine, it fires like a 4 stroke, but there is no crank case, and the fuel needs to be mixed like a 2 stroke. What is the vehicle you are referencing? A dirt bike or street bike? It seems the CR125 and NR125 are both 2 stroke engines, so somehow the fuel needs to be mixed with 2-stroke oil. Can you take a picture of the crankcase oil cap?

Feb 04, 2015 | Honda Motorcycles

1 Answer

Hi, my stepson has a 2012 Generic Trigger SM50 and it seems to be running with too much 2 stroke oil mixing with the fuel. When the engine is running he looks like one of the Red Arrows and there is...


Do you mix oil in gas or is there a separate oil tank for the two stroke oil? If there's a separate tank, check for an inline regulator, it looks like an inline fuel filter. Should be below oil tank right in the oil hose. This may be bad and not regulating the amount of oil that enters engine. Hope this helps.

Aug 09, 2013 | 2010 Generic Trigger SM 50

1 Answer

I have a Poulan 625 push mower. What type of oil should I use in it? I can't find my manual.


If it has a 4 stroke engine, as most lawnmowers do, then you just car engine oil. Very occasionally you come across 2 stroke mowers.

The way to know if it's a 4 stroke or 2 stroke engine is, if it has an oil tank it's a 4 stroke engine. If there's only the one tank, i.e. you mix the oil with the petrol then it's a 2 stroke engine.

If it's a 2 stroke engine you mix petrol and 2 stroke oil at a ratio of 40:1

Jul 12, 2011 | Poulan Garden

1 Answer

What kind of oil do i use to mix with gas for my Poulan gas trimmer. Can i use WD30 motor oil or does it have to specifically say its for 2stroke engines? the ratio on the trimmer says 40:1 so i assume...


DO NOT USE MOTOR OIL!!!

There is a special 2-stroke engine oil mix that you can purchase at various stores that have outdoor equipment or you can also find mix at Walmart. There are instructions for proper mixing on the bottle.

Remember not to put 2-stroke mixed fuel in your lawn mower unless it is also 2-stroke (rare). And the converse is also true, do not put your 4-stroke lawn mower fuel in your 2-stroke weed eater.

If this is really helpful, please rate.

Jul 10, 2011 | Poulan/Weed Eater No. Bvm200le 711482 24cc...

3 Answers

How much oil do I ideally put into a full gas tank on my 2 stroke Kymco Like 50? can you put too much?


Hi, not familiar with this bike,does it not have a separate oil tank,?, if your machine is pre mix this means you mix the correct amount of oil and fuel together as. Single form of lubrication, this way the oil gets directly to the engine parts, when the fuel,oil,and air mixture enter the engine the spark ignights it and the engine running process is started, the mixture is atomized to a form of mist, to much oil would render the mist to sticky, and seizure may occure from overheating, as would also be the case for to little oil, MY RESEARCH DOES NOT COME UP WITH A 4T 2 STROKE
ONLY A 4 STROKE WHICH OBVOUSLY HAS NO OIL ADDED TO THE PETROL.

May 30, 2011 | 2010 Kymco Like 50 4T

1 Answer

Is a Victa Sunbeam 160 Special a 2 stroke or 4 stroke? Wondering what additive to use with fuel. Thanks so much for your help.


hi there tanyajames88

your victa is a 2 stroke vc160 these units sare stated to run 25:1 fuel / oil ratio

that is 40 mils of 2 stroke for every 1.0 litre of petrol that mix

so if mixing 2 litres - 1st put in 80 mils of good quality 2 stroke oil then put in 2 litres of petrol , give good shake and fill up your mower tank

2 stroke oil that you would use for sthil chainsaw would be ok its hi quality

you could use some fuel stabilizer additive to hekp stop mix from going stale too soon
if wish but most times just mix enoyugh mix to het job done , then mix more if need it

that way mix is always fresh

vheers pauly46

May 29, 2011 | Garden

2 Answers

1994 300 4x4 2 stroke, where do you fill the


2-stroke gasoline engines don't use a reserve of oil in the crankcase the way 4-stroke engines do. Instead, you add oil to the gasoline to ensure lubrication of the engine. The correct ratio to mix would be in the owner's manual.

Jun 04, 2010 | Polaris ATV

1 Answer

I need to know if I need to mix the gas for my Yamaha 2002 Banshee 350 Twin or if I can just put in straight gas


Normally these days on 2 stroke engines you put fuel into the tank directly and then you should also have a reservoir for your oil mix on the LH side cover. The system will mix the required fuel to oil mix themselves. Good enough?

May 21, 2010 | Motorcycles

1 Answer

Oil


40:1 fuel mix ratio is good for this model. you put gas in the upper tank and 2 stroke oil in lower tank the mix pump will do the mix, if you are not sure the pump is working properly, mix 4 ounces of 2 stroke oil into 1 gallon of gasoline and put the mix in the upper tank, it reach the carburator by gravity

Nov 20, 2008 | 2005 Honda Dio

1 Answer

General


i know you have to change the oil and oil filter but how often and is that the only thing different from maintance on a 2-stroke?. Im getting an 04 kx 250f any help would be great!The two most important aspects of four-stroke maintenance are frequent oil/filter changes and regular valve clearance checks/adjustments. And some four-strokes (RMZ450 for example) have a manual timing chain tensioner that must be regularly checked/adjusted. Everything else is exactly like a two-stroke.,,,

Nov 10, 2008 | 2008 Sherco 1.25 Enduro

Not finding what you are looking for?
2007 Sherco 5.1i Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sherco Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sherco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...