Question about 2000 Gas Gas EC 200

2 Answers

Spark Plug gets wet too fast

I have a problem starting my bike. Some people tell me its because the spark plug is wet. I don't understand why my spark plug gets wet within 2 days. Do i have to change it that frequently? Even when i only use it for short distances. I have not even started to use it on off road terrain. However after i change to a new spark plug, the bike can immediately be started and it cannot be started 2 days later after.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Too spark plug gets wet to fast . You are getting much fuel take the carb. of and adjust the float that should stop you from fouling plugs. Good luck P.S. you might have too adjust it more than once.

Posted on Jun 18, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 64 Answers

Air filter may be blocked and inspect exhaust baffles and clean.

Posted on Apr 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got spark new plug fuel carb changed won't fire or start


Is the plug wet?, maybe it's either flooded or it's not getting fuel.
Pull plug if wet dry it, make sure fuel off and crank bike with out plug in to clear the cylinder. Replace plug, try to start. if it doesn't start then you have to determine if it's flooding or if it isn't. Hows the spark look? Orange or white/blue? How fast is it cranking? Is the battery fully charged?

May 27, 2015 | Motorcycles

1 Answer

Spark plug fails after two hours of riding??


Either you got the wrong type plugs (too cold) and/or that bike is running way too rich! Time to use a tool like ColorTune to get to the bottom of it. Who normally works on this bike? If you don't do the work yourself, then better to take it to a reputable shop/mechanic.

Mar 18, 2014 | 2005 KTM EXC 125

1 Answer

Where are the components located on a 1994 E320 Mercedes Sedan?


don\'t understand: cranks fast enough (battery low??) or crank at all??. Need more detail(s);if it cranks at all but slow,you won\'t get a spark;don\'t touch the end of the spark plug wire \'cause it\'d make your butt pucker if/when you get spark!!! honestly.

Jan 29, 2013 | 1994 Mercedes-Benz E-Class

2 Answers

How do you know if the magneto is bad


If you have a spark, you don't have a "Magneto" problem, Check the air filter and the 2 stoke oil tank. And check that the spark plug is wet, if it isn't firing and the plug isn't wet, you don't have any fuel getting to the combustion chamber.

May 06, 2012 | 1981 Suzuki TS 185

1 Answer

The bike was running fine. now it will not start at all. Does not seem to be getting any spark


Fouling a spark plug with unleaded fuel and wet fouling a spark plug with ethanol fuel is more common than you would think. Take out the old plug. Test for spark with a new plug. Then put in the new plug.

Sep 13, 2010 | 1998 Honda XR 400R

1 Answer

My bike won't start


For an engine ti fire, it must have both fuel and spark..
After cranking to start without success, remove a spark plug and check to see it is wet, or dry.
If it's wet, you have fuel at least, and possibly no spark. If dry, you either have spark and fuel, or spark and no fuel.
2. Check spark by connecting the plug you removed to the HT cable and cranking the engine. A nice blueish spark should occur across the plug. Make sure the plug's body is in contact with the engine.
So if there's spark then there's no fuel
If there's fuel, theres no spark
When you have determine which is missing, work on that component.
Of course it could be other things too, but these are the eaiest to test.

Apr 11, 2010 | 1995 Honda VT 600 C Shadow

2 Answers

Suzuki TS125R (1994 model), not TS185: Trouble starting


I have same problem with my ts 125r i solve problem with new spark but not NGK BP9ES i put another spark plug am not sure about her name i thik its Golden Wathes with four pips.U must measure leght and widht for this spark plug and heat power. Peace

Apr 09, 2010 | 1981 Suzuki TS 185

1 Answer

My bike wont fire


First put a nail in the plug boot and hold it close to the engine and crank it over to see if you have spark to the plug, if you do, pull the spark plug out and see if it's wet. If the plug is dry put about a teaspoon of gas in the plug hole and put it back together, it should run for a few seconds. If it does that you have a fuel supply problem. It may have a fuel shutoff valve inoperative, or a carburetor problem. If you have no spark to start with and the plug is wet with gas, you have an ignition problem. If the exhaust smells like gas you are probably getting lots of fuel, but the spark plug can tell us lots of things. A new spark plug probably won't hurt either.
Jordan

Sep 30, 2009 | 1986 Suzuki LS 650 Savage

1 Answer

I have Boxer AT bike of 2003 made. It has Kehin PC 18 Carburetor and when I use the choke to start the bike, the bike not start at all. What's shall I do?


It seems tht it also doesn't start wth the choke in 'off' position.
Two things:- (1) :-check if the spark plug is wet wth fuel.(Crank it for a little cranks and thn remove the spark plug to check if its wet.)
(2) :- check if you do get sparks at the spark plug, by grounding it to the engine away from any fuel fumes!
I am sure one of the two is missing thts why its not starting.
Let me know the out come please.

Jul 27, 2009 | 2005 Bajaj CT 100

2 Answers

I have a pit bike 125 its not starting wot so ever got good spark but still not start


If you have spark them it must be gas. eather no gas or to much gas. Put it on chock, be sure the shut off valve is in on position.Now crank it over a few times , if it wont fire. Check the plug , is it wet or dry .If its wet then it may be flooded and needs to dry out and air out the cylinder.Try starting when dry. If its dry try putting a 1/2 oz of gas into the spark plug hole. replace the plug and turn it over . This will get them to fire up. Good luck DFD

Apr 22, 2009 | RTO Pit Bikes

Not finding what you are looking for?
2000 Gas Gas EC 200 Logo

Related Topics:

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gas Gas Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Kim Halliwell

Level 1 Expert

32 Answers

Livewyre Studio
Livewyre Studio

Level 1 Expert

24 Answers

Are you a Gas Gas Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...