Question about 1996 Suzuki VS 1400 Intruder

Open Question

Circuit breaker Is there a circuit breaker on the 1999 Suzuki 800 Intruder, if so where?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Suzuki VS 800 Intruder stalls when put into gear


Hi, Brandon great talking to you on "6ya" hope everything works out I have added some VS800 links just in case it's not a VL800 and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
put it gear and it dies
http://katriders.com/vb/showthread.php?t=85802
Suzuki VS700 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Jul 23, 2017 | 1998 Suzuki VS 800 Intruder

1 Answer

How do I change the high beam indicater bulb in the dash of a Suzuki vs 800 intruder


Hi, Randy for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How To Replace Light Bulbs In The Dash Suzuki Intruder VL1500
Suzuki VS700 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual
Suzuki VS 800 Intruder 1999

Mar 28, 2017 | Suzuki VS 800 Intruder Motorcycles

1 Answer

2000 Suzuki intruder VL1500 battery over 12 volts but no lights or power completely dead


Hi, Louis and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Totally dead no power
Suzuki Intruder 1500 LC
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki Intruder VL1500B Owner Manual

Feb 25, 2017 | 2000 Suzuki VL 1500 Intruder LC

1 Answer

Getting nothing when attempting to start my '86 VS Intruder. Starter motor? battery good. thank you


Hi, Charlie and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
VS 800 Intruder Problem starting Page 2
Suzuki VS700 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual

Oct 30, 2016 | Suzuki VS 800 Intruder Motorcycles

1 Answer

My 2000 suzuki lc 1500 intruder won't start


Hi, Tom and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2002 Suzuki Intruder 1500 won start
Suzuki intruder 1500 no start definite fix
Suzuki Intruder 1500 Not Turning Over This might be why
http://service.tanga-moteurs.ro/data/Suzuki_VL1500_Intruder_98_00_Service_Manual_BY_DEN.pdf

Sep 05, 2016 | Suzuki Motorcycles

1 Answer

Suzuki VS 800 Intruder leaking water


Water leaks , have you closely inspected the header tank for cracks,leaks etc. Could be that once its hot the increae in pressure is causing the leak, look for any traces of old leaks which may have dried out by the time you stip things down

Apr 02, 2014 | 1999 Suzuki VS 800 Intruder

1 Answer

Suzuki intruder VS 800 running only on rear cylinder


Swap plugs and HT leads to see if that is the cause.

Jan 26, 2011 | 1999 Suzuki VS 800 Intruder

2 Answers

1997 suzuki intruder 800 starter is running backwards


The starter is a DC motor. If the wires are crossed the motor will run backwards. Check all the connections including the switch.

Please rate this solution. Thanks!

Apr 02, 2009 | 1999 Suzuki VS 800 Intruder

Not finding what you are looking for?
1996 Suzuki VS 1400 Intruder Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...