Question about 2000 Yamaha Royal Star Venture

1 Answer

One carb running rich?

I have a 1989 Yamaha Venture Royale 1300. It would pop while idling so I wanted to sync the carbs. In the process I noticed if I remove the rubber cap on the vacuum port on one of the carbs, the idle doesn't change and the popping stops. When I put the cap back on and try the same thing with the other 3 caps (taking off the putting back on) the idle will lower when off and go back to normal with cap on. Any idea what is wrong with the first carb? Is it running rich and not getting enough air?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

You probably have a bad spark plug or spark plug cap/wire or both, it probably is not the carb at all. try changing all your plugs and see if it fixes it.

Posted on Apr 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 v-star 1100 when twisting throttle and then back to idle position it takes a while to idle back down or stays at high rpm


More than likely the carbs are plugged up(makes the no idle, popping from the intake or pipe and sometimes hard starting), and/or a vacuum line(s) Is loose/broken, and the carbs are probably out of sync (makes the high sticking idle/little to no idle). I have many article written about cleaning the carbs and fuel system. Get the carbs and fuel system cleaned out if you are not familiar with the process.

Nov 19, 2013 | 2006 Yamaha V Star 1100 Classic

1 Answer

1989 Yamaha Venture Royale wiring diagram


Hi, Ianroscoe for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1989 Yamaha Venture Royale wiring diagram Google Search
Yamaha Motorcycle Wiring Diagrams
http://www.yamahaventure.nl/pdf/servicemanualxvz1300.pdf
OEM parts for Yamaha
YAMAHA XVZ1300A Owner Manual

Sep 10, 2011 | Yamaha Royal Star Venture Motorcycles

2 Answers

1986 yamaha royale venture...XVZ13DSC running a little rough when idle. Runs fine after up to speed... Backfires on delceleration sometimes... replaced spark plugs, all looked good with consistant tan...


The first thing that I would check is the choke. Is it sticking?? the backfire on decel indicates that it is getting to much fuel.
A new fuel filter is a very good idea but I would look at the old one and see if it is contaminated.
My concern is the fuel tank. If the carbs were done properly they should be fine. If there is a problem it could be rust in the fuel tank that is still polluting the carbs. I have had many bikes that age that require the fuel tank to be removed, cleaned and possibly coated inside.

I would also drain all of the carbs. Each float bowl has a drain screw and can be loosened up slightly to remove the fuel in the carb. Make sure to take a close look at the fuel that comes out to check for water or contamination.

I hope that this helps,
Steve

Jan 18, 2011 | Yamaha Royal Star Venture Motorcycles

1 Answer

How to remove and install rear tire


Hi, John_hurt sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
The Venturers Yamaha Venture Technical Support Library
1989 Yamaha Venture Royale 1300 rear tire removal video
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2006/LIT-11626-19-25%202006%20Venture_1193.pdf

May 19, 2010 | 2008 Yamaha Royal Star Venture

2 Answers

I have a yamaha venture 1986. It runs too rich. My dealer tells me I have to change the diaphragms. Could it be something else ? Thanks THE YEAR IS 1986


Try and see if you air cleaner unit is in need of replacement or a clean .You could try adjusting your fuel adjustment screws but you will need a set off carb balancers ,to do the job properly .

Mar 17, 2010 | 1996 Yamaha Royal Star XVZ 1300 A

1 Answer

(More) Gas is coming out of the carburetor overflow hose on my 1989 Yamaha Venture Royale. How do I fix this problem?


You have a float sticking! You will have to remove the carb and dismantle it and give it a good cleaning and adjustment and reinstall.

Oct 13, 2009 | Yamaha XT 125 R Motorcycles

1 Answer

Apparent carb problem.


carb sync problem.. check online for some really easy to make carb sync tools from home..

the tubing with liquid fill worked well for me

cheers

Sep 17, 2009 | 1984 Yamaha FJ 1100

2 Answers

Yamaha runing rich


With the mixture screws out 4 turns, I would bet your piloit jets are too big. Try the next size down and see how it runs at low rpm. You don't want the mixture screws turned out 4 turns on any bike, nor all the way in. 1-3 turns out, closer to 2 is better, is a good general rule for setting them on most carbed bikes. If you have the right jets in the carbs, a quarter to half a turn on the screws makes a noticable difference, if you can crank them around all over and not change the way it runs much, the jets are wrong.

Nov 10, 2008 | 2004 Yamaha FJR 1300

Not finding what you are looking for?
2000 Yamaha Royal Star Venture Logo

716 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

vince

Level 3 Expert

936 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...