Question about 1992 kawasaki VN 750 Vulcan
What exactly needs to be loosened to remove the back tire from a Kawasaki Vulcan 750 @
Hi, Jbwreckingfi for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Rear Wheel Removal Kawasaki Vulcan 750 Forum Kawasaki VN750 Forums
How to remove the rear wheel of your shaft driven motorcycle Kawasaki VN 750 Service Manual
OEM Parts for Kawasaki
1993 Kawasaki Vulcan 750 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 15, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
yes but its not easy you pretty much have to take all the exturnal parts off carbs, exhuast airbox if u have one but it can be done make sure you have a swivle for your socketsbest place to get a starter is sbt.com short block tech
Posted on Jun 27, 2009
Firstly run your engine till you reach its normal running temp .The engine drain plug will be found under neath the engine normally at the lowest part .Warm oil drains out of the engine much more quickly that cold oil ..when all the oil stops dripping then remove the oil filter ,make sure that the sealing ring is removed ,take care the oil in the filter will be very hot .replace with your new filter make sure you do not cross thread the oil filter unit and any seals have been fitted . Refit your drain plug and fill up to the required level . start engine ,your oil level will drop because the oil filter will fill up and the new oil will be pumped around the engine. make sure that the engine level is topped up when all the oil has reached all the parts of the engine .Do not over fill the engine as this will cause unwanted pressure .and oil leaks .Remember to replace the oil filler cap and that its tight .
Posted on Mar 14, 2010
Go to this site guy is good at explaining things and has a whole array of photos.... http://www.gadgetjq.com/reartireoff.htm
Posted on Jul 14, 2010
SOURCE: i need a diagram for
There is no "diagram" showing the whole routing of fuel lines in the bike. You need to use different diagrams in Fuel System section of the service manual. Fuel system section starts at page 15 in service manual, but what you really need starts at page 40. I have posted fuel service manual at the end of comment.
There is one forum where users discussed the routing. One user has colored the diagram from service manual to indicate lines routing. Here the diagram:
Here the forum, I quote:
"The red and yellow are the fuel lines that go to the petcock. The green one you left unmarked also goes to the petcock. The line with a question mark is a vacuum line that connects to a part in front of the battery along with the larger lines to the cylinders."
Here the service manual in PDF format.
Posted on Sep 05, 2011
Tips for a great answer:
Nov 29, 2017 | 1995 kawasaki VN 750 Vulcan
Jun 05, 2014 | 1992 kawasaki VN 750 Vulcan
Apr 06, 2014 | 1992 kawasaki VN 750 Vulcan
Aug 11, 2012 | 1995 kawasaki VN 750 Vulcan
Mar 24, 2012 | 2005 kawasaki VN 750 Vulcan
Feb 28, 2012 | 1995 kawasaki VN 750 Vulcan
Aug 20, 2011 | 1999 kawasaki VN 750 Vulcan
Jul 07, 2017 | 1992 kawasaki VN 750 Vulcan
Apr 03, 2011 | 1987 kawasaki VN 750 Vulcan
Jun 11, 2009 | 2000 kawasaki VN 1500 Vulcan Classic
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: