Question about 1981 Honda GL 1100 Gold Wing

2 Answers

I need to push it out of my garage to another area, i know it is heavy, i know i cant do it myself, so how many will it take?

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

It has taken me just 3 people, 1 to steer and 2 to push not to hard...

Posted on Aug 14, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 311 Answers

Yes they are heavy,but they are very easy to move around once you get them standing up,one person each side is ample,one at the back to if you want,but make sure everyone knows what to do because if they overbalance they are very hard to pickup,i know as i fell off a 1200 in the snow and had to pick it up myself,i found a lot of muscles i didnt even know i had,hope this helps...cheers

Posted on May 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Is there such a thing as an impermeable garage floor parking mat with a containment lip that costs less than $350?

I went google and typed in --garage containment mats and found a site-- which caters for what you want even customized sizes
unfortunately I don't know what you consider a small fortune but they have one on the site 16' x 7.4' that holds 70 gallons for $205.00 usd
any way best I can do is to advise you to go google and type in what I did and check all the sites and you may find a pointer to what you want

Jul 03, 2016 | Cars & Trucks

1 Answer

How to remove lower ball joint?Pickle fork not big enough to break loose

Hi We do not have this vehicle here, need to know what type of suspension it has, more than likely it is a McPherson strut assembly, if it is the bottom ball joint will need to be released, I have found some very tight and have had to use both a portable hydraulic tool or the heavy duty pneumatic pickle fork with real good air pressure, one I had to warm the tapered eye boss area with a gas torch with the hydraulic tool at max. One other method is to leave the ball joint nut on loosely, heat the tapered eye area and with a very heavy duty brass drift and heavy hammer hit the side of the tapered eye assembly, this may pop the tapered ball joint bolt free. This is not at times an easy home workshop repair, you will need to be a very mechanical person, good luck. P.

Jun 24, 2014 | 2002 Mercury Sable

1 Answer

Front wheel drive stuck

not sure what to tell you without seeing it for myself so all i can do is give you some ideas to check,make sure you dont have a rock or rocks stuck up front by your axles,also if you have been driving through heavy snow it could be froze up front,if you had a warm garage to push it into to check these that would help,and if your shifter isnt stuck hopefully your tranny didnt go bad,but check your rack and pinion as well

Jan 15, 2013 | 1999 Ford Explorer

1 Answer

Cant get my abs on my 93 jeep grand cherokee laredo i have replaced all break parts and changed all brake componets the brakes feel like they are pushing against you and they dont hold preasure how can i...

i dont want to make u feel like u dont know what ur doing, cuz trust me ive overlooked stuff that i wanted to hit myself in the head with a ball pin hammer myself more times than i can count. go look at all the wiring at the rotor assembly and make sure there isnt a wire that is cut or smashed or exposed. im sure u have already done so. but man ive over looked some stupid sh$t over the yrs. one yr building my hotrod i switched two plug wires and didnt catch the mistake until i had enough fuel in the header collecter to ignite and sound like i blew the whole garage up. so i put a new header in. fixed my ******* mistake and for days couldnt figure why my whole left bank was misfiring!!. so 2:30 am i cant sleep i go to garage i didnt turn on lights. i just started it up. and crawled under it. the lightning storm was beautiful!!! :) i didnt wrap my new header!! lesson learned. good luck brother

Feb 27, 2012 | Cars & Trucks

1 Answer

Wont stay running without pushing primer

Hi... I have a Poulan PRO Quantum xnp 6.75. Garage kept, unused approximately 2 yrs. Added fuel, primed & mower started but then shut down immediately. Then fuel began leaking from the primer button. I'm a single mom & CANNOT afford to have anyone fix this. However I am attempting to repair myself. PLEASE.... If you have any suggestions &/or solutions I would LOVE to know.

Apr 12, 2009 | Garden

1 Answer

My garage door won't close. I push the remote and

If your springs were sprung it would not be that easy to open.The reason it crashes down is because they have the door balanced good for the door opener.Check on the door opener itself and see where the reset button is.Maybe something was obstructing to not let it open..Look for the reset and that should get you going on the door opening and closing.Just going to have to figure it out why it did that..

Mar 30, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Garage door problem

If you have a Chraftsman/Liftmaster:
 1.Check to see if the door is running correctly.
  A. Run the door down and pull the emergency release. See if the door will run easily by itself.
    1. If it runs hard by hand try lubricating the rollers and hinges with silicone spray or some form of lubricant (not WD 40)
    2. If the door is heavy and falls back to the ground, you probably have a spring issue (either broken or needs more tension) in this case call a professional door repair company in your area.
  B. If the door runs fine then check the up and  down force on your operator (the box that hangs from the ceiling). If the light bulb(s) on your operator are on the front and/or back, the force adjustment screw is on the back of the operator. If the lights are on the sides of the operator then the force adjustment screw is on the right side (looking from the back of the operator and facing  the garage door). Turn the light blue adjustment screw with the up arrow to a higher number.
C. If this does not solve your problem the top bushing could be going out of your operator. Open the case and see if a lot of black filings are on the top of the big gear. If so the gear assy. will have to be replaced part # 41C4220A

Jan 04, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Heavy noise from belt area

ck for bad bearings in a pulley or tensioner/

Dec 26, 2008 | Peugeot Esperante Cars & Trucks

Not finding what you are looking for?
1981 Honda GL 1100  Gold Wing Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers


Level 3 Expert

76649 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides