Question about 2001 Yamaha V Star 1100 Classic

1 Answer

Flat rear tire how to remove it - 2001 Yamaha V Star 1100 Classic

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,945 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Tires Star 1100 Wiki Knowledge Base
2008 Vstar Rear Tire Change
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-36_96.pdf

Posted on May 26, 2016

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 125 Answers

SOURCE: 1977 honda goldwing rear tire removal never had

Get a service manual.
there are two ways to go. both time consuming and of moderate difficulty.
My favorite is to remove the trunk, saddlebags, rear fender as a unit. Then the tire is in the open to work on. Not an easy job.

Posted on Jun 16, 2009

luckyluke78
  • 333 Answers

SOURCE: I have a tw200 2007

Make sure that the tyre is completely off the rim beeding and push the tyre on the opposite side of the valve to the centre of the rim and then proceed to lever the tyre off (with tyre levers)about 100mm from valve on either end.

make sure you have undone the nut that secures the valve first.

Posted on Aug 06, 2009

  • 409 Answers

SOURCE: how to remove the rear tire with shaft drive

Pull the rear axle, and spacer on the brake side of wheel. Un hook brake rod and brake strut. Position yourself on the brake side of the bike and pull the rear wheel straight out of the final drive housing. Put a little grease on thhe final drive splines upon reinstalling the wheel to aid removal next time.

Posted on Apr 02, 2010

nitro650
  • 93 Answers

SOURCE: I have a flat tire

First jack the bike from the rear, then you have to unscrew the diff bolts on the left hand side of the swing arm, unscrew the rear brake rod, and the drum stabilizer, then unscrew the main hub bolt and gently pull out the wheel. Be careful when pulling it out l as the prop-shaft tends to fall quickly and you might get hurt or damage it or paint-work, and the diff has a tendency of detaching from the wheel.

Posted on Nov 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change rear tire ?


Remove rear wheel with either a 15 mm or a 17 mm wrench. Take the tire off the wheel. If you are replacing a tire, reverse procedure. If you have a flat, replace inner tube, then reverse procedure

Aug 14, 2014 | Huffy Cranbrook 26" Mens Cruiser Bike

1 Answer

How to change back innertube on 26" mongoose estes bike


First turn the adjuster on the rear brake handle all the way in and make sure the slots on the adjuster and set nut are lined up, pull the brake cable out and leave it attached to the lever to open the rear brake pads, loosen the bolts on the tire and pull the derailer up to remove the tire, remove the dustcap from tube and using a flat tool (Wal-Mart has tire tools for $1) take one side of the tire bead out of the rim, pull the old tube out, place the stem of the new tube in the hole and put the cap on, tuck the new tube in the tire trying to keep it flat as possible, push the bead of the tire back into the rim. before inflating the tire, put it back on the frame while pulling the derailer up to get the chain back on the cogs( they will adjust later) tighten the bolts and inflate the tire to desired pressure (between 35-60 psi)

Jul 05, 2014 | Mongoose Cycling

1 Answer

Removing rear wheels


you dont need to remove tires from bike, turn bike on one side so back tire is flat to ground, this give you the other tire in air for easier access. Use a tire removal kit to take off tire there relatively cheap, try walmart, they usually have the tires and the removal kits too...

Mar 28, 2012 | Schwinn Meridian Adult 26-Inch 3-Wheel...

1 Answer

I own a Sears Yard Machine riding mower and the rear tires are flat and I'm trying to remove the tire and take it to tire dealer to check for leaks and plug. My problem is HOW TO REMOVE THE REAR...


there is a cap over the end of the axle, it snaps off. with the rear end jacked in the air remove the C-clip which you find under the cap. the wheels will then pull off. make sure you put them back on correctly, there is an inside and an outside. If you reverse it, you will rub a groove in the tire and it will go flat and have to be replaced and they cost more than car tires. And do not pull the wheel off in the lawn or in a gravel driveway. when the wheel comes off a small key will fall to the ground. you will need to re-install this key when you put it back together or the wheels will not move. if you lose the key into the grass or gravel you will have to go to a real hardware store or small engine repair shop to buy another.

May 24, 2011 | Yard Machines Garden

1 Answer

Changing rear flat tire


Find jack follow instructions to raise vehicle after parking brake is on. Remove lug nuts and take wheel with flat tire off. Replace with the spare tire and tighten lug nuts. lower vehicle, put jack , lug wrench and flat tire in vehicle. Drive to a tire repair store and fix the problem.

Dec 11, 2010 | 1996 Dodge Caravan

2 Answers

Where is the spare tire located on a 1995 ford aerostar?


Section 00-02: Lifting, Jacking and Spare Tire Stowage 1995 Aerostar, Ranger, Explorer Workshop Manual
TIRE STOWAGE Tire, Spare, Removal, Aerostar If the Aerostar is a standard length vehicle the spare tire is mounted inside to a carrier at the left rear quarter panel. To remove the spare tire, remove the wing nut and plate. A flat tire can be temporarily stowed in the same location.



If the Aerostar is the bus with a standard length body or extended length (all models), the temporary spare tire is stowed at the rear of the vehicle under the body. The Aerostar standard length E-4WD bus spare tire is mounted on the floor.
  1. Insert lug nut wrench into the actuator hole and turn counterclockwise until the cable extends to allow the spare tire to be pulled rearward from under the vehicle.
  1. Slide spare tire to the rear and remove the retainer from the wheel.
  1. To stow cable/retainer with spare tire removed, insert cable fitting into carrier rear wall slot, place wheel retainer against the carrier, and turn lug nut wrench clockwise until slack is removed.
please rate, thanks

Jul 09, 2010 | 1995 Ford Aerostar

1 Answer

How to remove the rear tire with shaft drive


Pull the rear axle, and spacer on the brake side of wheel. Un hook brake rod and brake strut. Position yourself on the brake side of the bike and pull the rear wheel straight out of the final drive housing. Put a little grease on thhe final drive splines upon reinstalling the wheel to aid removal next time.

Apr 01, 2010 | 1979 Yamaha TX 750

1 Answer

1977 honda goldwing rear tire removal never had


Get a service manual.
there are two ways to go. both time consuming and of moderate difficulty.
My favorite is to remove the trunk, saddlebags, rear fender as a unit. Then the tire is in the open to work on. Not an easy job.

Jun 06, 2009 | 1982 Honda GL 1100 Gold Wing

Not finding what you are looking for?
2001 Yamaha V Star 1100 Classic Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...