Question about 2005 Honda VT 750 Shadow Aero

1 Answer

98 1100 ACE OIL COMMING OUT BREATHER OF FINAL DRIVE

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

It is usuall for a little oil to come out of the breather, you can buy a filter type thing, that goes on the end of the breather hose. Check your oil level,make sure not too much.

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Final drive


http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf

The link will take you to a service manual, I suggest downloading it. Good info in it.
First, If the oil came out of the breather, you need to find out if it was due to a faulty breather or through natural loss (you will lose gear oil over time through rapid temperature increase causing vapor and pressure increase-eventually oil loss will occur through the breather; synthetic oil can help reduce this, but so can regular level checks. If the breather is defective, replace with a new one (10-20 bucks depending on where you go) it is a press fit.
Second, if it came out of the fill plug on the back of the gear case, check the threads on the gear case as well as the plug, if both are good, check the condition of the collar (brass/copper looking ring on the plug. If it is missing, that could contribute to the oil loss. When you reassemble, use teflon tape to ensure a good tight fit. (mine has teflon tape on there too-only use enough to coat the threads...if you use too much, the plug will not seat all the way due to the tape blocking the threads)
Third, do the same check on the drain plug on the bottom. Reassemble with teflon tape on the plug.
Finally, on page 272 of that same manual in the link, there are procedures to follow for checking the drive shaft seal for leaks by the case. Check it and replace seals if required.

Feb 03, 2014 | Yamaha V Star Classic Motorcycles

1 Answer

Final drive breather


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
vstar final drive breather cap leak
oil leak from rear differential breather plug on 2007 vstar
98 00 Yamaha XV650 Star Service Manual XVS650 Moto Data Project
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Oct 07, 2013 | 2006 Yamaha V Star Classic

1 Answer

How to change final drive oil breather on 1990 honda st1100


If you are referring to the small chrome cap that is located on the top of the rear differential it presses into the housing and can be removed by grasping with channel locks and pull upward while twisting. It will most likely scratch and or crush upon removal. A new one simply taps into place until firmly seated.

Jan 13, 2013 | Motorcycles

1 Answer

77 shovelhead w joe hunt mag and s&s oil pump everything is great except after about 20 mins of riding oil start coming out of gasket all around cam cover and mag assembly dont know what would cause...


There ae a number of things it could be. What it sounds like to me is that the oil is not being pumped back into the oil tank and is collecting in the cam chest. It should be blowing out of your crankcase breather tube as well if your crankcase breather tube is open. Behind the oil pump, there are three holes. One is behind and above the oil pump. This is where the breather tube from your oil tank and the primary comes into the engine. The hole directly behind the oil pump in the middle is the oil return line from the very back end of the primary where the oil from the primary is recirculated back into the engine. The bottom hole behind the oil pump is the crankcase breather. It should have a hose that runs back around behind the transmission and just dead ends in a bracket pointed towards the final drive chain. This hose should be open to vent the crankcase pressure. Have you checked to see if oil is being pumped back into the oil tank? If not, the scavenge gears of the oil pump may not be pumping the oil out of the engine and back to the tank. If this is the problem, you may not have the drive key properly installed in the scavenge gears of the oil pump. Still, oil should be pouring out of the crankcase breather hole. But, this is what it sounds like it's doing to me. The oil is building up in the cam chest for some reason.

Good Luck
steve

Sep 06, 2011 | Harley Davidson FXDWGI Dyna Wide Glide...

1 Answer

Oil leaking from vent on drive shaft diff


Hi, Jnbperry it is overfilled or the vent is partially blocked for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
vstar final drive breather cap leak
oil leak from rear differential breather plug on 2007 vstar
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Nov 21, 2010 | Yamaha V Star Classic Motorcycles

1 Answer

Oil leak from final drive housing, but not from the drain bolt or the filler bolt but from whatever the device at 12 0'clock on the top of the housing is!


The device at 12 0'clock is a breather. Check you have the right amount of the right grade oil in the final drive. Best to drain it all out and start again.

Jan 31, 2010 | 2000 Yamaha XJ 900 S Diversion

1 Answer

Oil getting into the air filter and cover after a ride


oil seems to be comming up from the crankase breather tube, which shoud only bring up fumes. most probable cause is oil is over filled.if oil level is good, problem lays in the breather valve mechanism in the engine, or severly leaking piston rings

Aug 22, 2009 | kawasaki KLV 1000 Motorcycles

2 Answers

77 harley sportster is spitting oil out of the cam cover breather


You may have a broken or ruptured hose that is causing the oil to leak. You will need the hose fixed and some more oil put in.

Mar 22, 2009 | 1979 Harley Davidson XLH 1000 Sportster

1 Answer

2006 Yamaha V Star Silverado oil leaking from top breather cap on final drive


Hi, Dswaustin it may be overfilled for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
vstar final drive breather cap leak
oil leak from rear differential breather plug on 2007 vstar
Yamaha XVS650 Service Manual
OEM parts for Yamaha
YAMAHA XVS650 Owner Manual

Mar 15, 2009 | 2006 Yamaha V Star Silverado

2 Answers

Top of final gear there is a knob where oil is leakin


" Top of final gear ", If you mean the output sprocket then the oil seal needs to be replaced. Not a big deal to do. If the knob you refer to is on top of the gearbox then you probably are referring to the crankcase breather tube. A bit of oil here is normal especially as a bike gets older. Blow-by from the cylinders goes into the crankcase and the out the breather tube. The only way to stop the oil is to bore the cylinders and put in new pistons and rings.

Mar 13, 2009 | 2002 Yamaha V Star 1100 Classic

Not finding what you are looking for?
2005 Honda VT 750 Shadow Aero Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...