How do i rig the sails on a guppy 13'?i have all the rigging but cant get the pullys figured out i know nothing of sailing a diagram would help more than anything

What’s wrong with it exactly? You need to be specific with your questions. If it’s torn, you can buy some adhesive paneling material that you cut to shape and apply to both sides of the sail. It works fine for most cases, however the laser sail is quite large in terms of ratio.... boat:sail size. That means high sail pressure in lighter winds.

Your best bet it to take it to a sail maker for repair.

Ulman sails
North sails

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/taylor_e81897e2b9d82155

Hi Pamela. I hope you have found solution by now. If not, take a look at these shade sails: http://shadesailsydney.net.au/

Windsurfing equipment consists of board that looks like a big surfboard and the rig. The rig is like the engine. It has many parts including the sail, the mast, the boom (the part you hold on to) and the extension and universal.

The choice for your first windsurfing board and sail depends on many factors. The main ones are: sailing conditions where you sail, your weight and your ability. Stronger winds, less weight and higher skills indicate a smaller board and sails. For most people a board with more or less 180 liters of volume with a sail around 4.0-6.5 sqr.meters is the perfect starter package.
from http://www.uswindsurfing.org/?page_id=70

You do not need a license to sail your Yacht. However, if it is not yours and you are renting it, you may need a sailing license or some sort of certificate that proofs that you are capable of sailing the boat.

Also keep in mind that this may differ from country to country so you may want to double check.

I'm not sure if this is what you're looking for:
1=O
2=I
3=L
4=F
5=B or K
6=K or B
7=S or A
8=A or S
9=U

Hope this helps!

not much to it really .Left toggle forward for speed (get used to running boat slow before you drop bait,takes a bit of practise).Left toggle back opens hopper to drop bait and rig.(Adjust trimmer nearby so motor not running when toggle not operated, usually about 3/4 up) Right toggle for direction left/right (adjust trimmer nearby if boat sails left or right) Get used to just a quick flick of the toggle to direct the boat. Leave handset aerial one section short of fully up in case you sail out of range.Hope this helps

If you are looking to sail with comfort, safety or performance you may have to put together not only the wind, the ocean, the sails but your sailboat hardware.From blocks for proper sail trim to furling units for easy sail handling. These are examples of some important salling hardware: Bailers, Blocks, Rigging, Winches, Shackles and rope cluches.

A sail switch is a Blower "on" proof switch. It's purpose is to prevent equipment such as air cleaners and/or humidifiers from energizing unless the blower is running. The sail switch literally has a sail that is put in the ductwork. When the blower starts, the airflow will push the sail so as to close a switch allowing accessory equipment to operate.

I hope you find this information to be very helpful to your moving forward. Let me know if you have any further questions, comments, or concerns.

Please leave a rating. :-)

hello! the best thing you should see the store from where you have purchased your kit. most stores do includes manual which are clear and really handy and accurate..giving all the details on how to do that thing.. thanks! you may fix the other parts if no manual is available through simply doing it with a common sense..you just have to join it by using stick glue.

Dear Sir; You fill up the cartridge that's fine,but you forget to change RF chip, it located right behind the cartridge, if you don't replace it , machine not going reset .