Question about 2000 Honda NSR 125

1 Answer

Hello i got a problem with my nsr125 1999. when i ride it its all fine starts first time also no problems but when i stop the bike dosent tick over. this is even after riding for say 20miles can anyone help

Posted by on

  • 3 more comments 
  • timbrell123 Apr 25, 2010

    ????

  • timbrell123 Apr 25, 2010

    basically when im riding the bike and stop at a set of lights the bike cuts out. dosent tick over it rides all fine and re starts straight away so im confused

  • timbrell123 Apr 25, 2010

    vvvvvvvvvvvvvvvv

  • timbrell123 Apr 26, 2010

    were are the caarb jets and how do i get to them do u know thanks

  • bbolod5 May 11, 2010

    Here is your solution » Honda »
    Suzuki » Yamaha » kawasaki » Others a

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

You may have a dirty idel jet ,check all carb jets .

Posted on Apr 26, 2010

  • no1lampmaste May 04, 2010

    You will find the idel jet inside the carb, you will need to strip down the whole cab to get to it .the idel jet is made of brass and will have a very small hole in the centre that gets blocked ,and will not lit fuel through to the cylinders

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1983 honda gold wing 1100 ,120,000 klm,runs great .When should one be doing a clutch change?


If you go easy on the clutch and do not pull a trailer, you may never have to replace the clutch. My GL1000 clutch has over 150,000 Miles (around 240,000 km) on it and works just fine

May 09, 2011 | 1983 Honda GL 1100 Innerstate Gold Wing

1 Answer

Actuaaly lemans 11 but problemis: bike starts first turn runs sweet and will tick over fine. Will tick over 5 or 6 times on either cylinder. Ride the bike for a few kilometers and it starts to feel a bit...


Has the bike been standing along time? if so its probably the pilot fuel tunnel in the carb blocked. replace the pilot jets and main jets and soak the the carbs in a good carb cleaner.

Feb 18, 2011 | 1985 Moto Guzzi Le mans III

1 Answer

I have a 2004 honda goldwing 1800 i don't ride it much at all but i start it once a week and let it run. I went to start it to go for a ride today and it had a knocking noise and it stoped so i rode it to...


Hello Gabe,

If the "knocking" noise sounds like it's coming from the lower end, listen to see if it's around the clutch area. My was making a "knocking" noise, only on cold starts, which sounded like the bike was trying to engage into gear. I drained the fluid from the clutch system and refilled with clean DOT 4 brake fluid. This stopped the problem.

Ironically enough, I was having the "ticking" problem too. When I would start my bike, about 30 seconds into warming it up, I heard a ticking noise for 2 -3 seconds of the right side of the bike. The Wing uses a hydraulic Valve and Tappet system which will, eventually, make noise if you run "low grade" fuel in the Wing. Go to your local Wal-Mart, or parts store, and buy a can of Sea Foam. Follow the directions on the bottle for the amount to use with a full tank of fuel (add it to your gas tank, not your crankcase). Fill your tank with Premium fuel and add the Sea Foam. Do this for two fill-ups and this should clean your valves and clear up your noise(s).

NOTE: any fuel with Ethanol in it is NOT good for bikes or cars and will cause buildup on your Valves. Sea Foam ALWAYS works. This is a cheap way to find out if it is just deposits or if you are going to need a mechanic.

Oz

Jan 09, 2011 | 2008 Honda GL 1800 Gold Wing

3 Answers

Aprilia rs125 sits at low revs and then cuts out, why and how to fix?


have you tried the idle screw give it a fiddle till its idling at 1500 revs or 1200

May 19, 2010 | 2003 Aprilia RS 125

1 Answer

Nsr 125 problem


It may be a safety switch in the clutch lever or bike stand switch being a bit sticky or broken wire in the wiring harness near the steering head that bends alot.

Apr 25, 2010 | 2000 Honda NSR 125

1 Answer

Hello my problem is when i try to start the bike with the eletric start the bike dosent start all all . all that happens is that the i hear a buzzing noise coming from behind the tank and the bike dosent...


The starter solenoid is not engaging.or the throughout drive is sticking.If you can hear the starter turning and not engaging,this is the 2 most common problems.Probably a job for an auto electrician.Its not a big problem and easy to fix.Hope this helps

Sep 03, 2009 | Honda NSR 125 Motorcycles

2 Answers

No problem just done top end rebuild


Just ride it normally. Avoid super high revs when the bike is not in gear and using the power.

Please rate this solution. Thanks bookerm!

Apr 02, 2009 | 2003 Yamaha YZ 125

1 Answer

Problems getting the bike moving


Have you had the clutch checked? Cause that's where it sounds like the problem is. My HD tried that same ****,adjusted the clutch,fine for a while,then it happened again. Turned out my clutch cable was popping loose in the hand-lever one wire at a time. Repaired that and no probs since.
So, I'd check the cable first and if it's good I'd have the clutch plates etc. checked. Good luck.

Apr 02, 2009 | 2002 kawasaki ER-5

1 Answer

Bike breaking down


hello mate ive just had the same problem with my bike and if you have had ur oil level low it causes air bubbles in the oil pump which is causing ur engine to temp seize cz of heat of piston drain ur oil pump then hopefully it should be fine good luck n i hope this works for you

Jan 21, 2009 | 2005 Aprilia RS 125

1 Answer

Having problems with gsxr750wp slugisg running then cutting out


you need to buy a new battery. or something is wrong with your charging system,possibly your rectifier which is located on the right or left side of your subframe underneath your cowling.

Nov 21, 2008 | 1993 Suzuki GSX-R 750 WP

Not finding what you are looking for?
2000 Honda NSR 125 Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...