Question about 2008 HM CRE F500XI

4 Answers

Ok i have a 2008 chineese 150cc scooter with 2300 km on it it has ran fine till just recently like a snap of a finger it dosent run right when you first start it it fires right up and idles just fine when you take off between 0 and 30 mph it acellerates ok not as strong as it used to be then it will get up to speed like it will make it to 50 its just slow getting there and it heaitates it lightly jerks as your getting up to speed and it also lighly jerks when you at speed and when you fully throttle it it hesitates more but if you lay off the throtthle just a little it speeds up a bit better any ideas? the funny thing is for the first2 to3 min you ride its fine after that it starts all the problems

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 722 Answers

Check your gear oil. (tranny fluid) - if it's jerking, it may be the gears - or if not, your clutch may need replaced.

carsandcomps,

Guru, Premium Expert @Fixya.com

Posted on Apr 25, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Just a tip that may resolve your problem. You may have fuel flooding. Please try to check your sparkplug for it may be covered with carbon. You can try to clean it but its better if you replace it for better fuel burning. Good spark plug can eliminate fuel flooding for fuel will be burned easily. Hope this helps and have a good one!

Posted on Apr 25, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

It will pay to check the fuel system from the tank to the carburettor, it sounds like you may have something blocking the flow. It may have gunk in the tank or you have something gloughing the fuel filter.

Hope this helps, let me know if you require more information

Thanks
Jason

Posted on Apr 25, 2010

  • Jason Maurirere
    Jason Maurirere Apr 25, 2010

    It definantely sounds like your fuel system is getting a blockage somewhere.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Check your choke connections for something is loosen up somewhat causing this problem. It seems not to open fully for you as it did before

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Titan velocity 150cc scooter and the gas gauge is not working any ideas ?


Hi, Jeff and the usual suspects are:
1. Blown instrument fuse.
2. Faulty sending unit.
3. Faulty wiring between sending unit and gauge.
4. Faulty ground or power connection.
5. Bad fuel gauge.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
My gas gauge doesnt work on my scooter
One way to fix non responsive stuck gas gauge on 50cc gy6
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
https://www.scooterdomain.com/chinese-parts/full-size-scooter-parts/125-150cc-scooter-parts
http://www.49ccscoot.com/manuals/Baja_SC150_Owners_Manual.pdf

Mar 10, 2017 | GAS Motorcycles

1 Answer

2008 jonway 150cc scooter wiring diagram


Hi, Shayne what you need is a wiring diagram that you can find in the back of your service manual if you can not find the first and best tool you ever bought for your bike, despair not, I have found one for you that costs zero dollars. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2008 jonway 150cc scooter wiring diagram Google Search
http://www.atv4usa.com/catalogs/XY150T-WiringDiagram.pdf
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
Service Support China Jonway Group
Free Jonway Motorcycle Service Manuals for download

Nov 18, 2016 | Jonway Motorcycles

1 Answer

Engine noise


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.GY6 Scooter Troubleshooting Strange Engine Noise
Motorcycle Ticking Problem Fixed
Scooter engine knock 150cc GY6
DIY Gy6 Scooter 50cc to 100cc Kit
How to Install Big Bore Kit on 50cc Scooter Every Step Included 80cc or...




Jan 15, 2014 | Bajaj Motorcycles

1 Answer

2012 Daix Scooter 150cc 3 wheel trike-I cannot find the latch to bring the seat up


what size air filter fits my 2007 daix scooter trike, it won't go fast than 65 km

Apr 16, 2013 | Motorcycles

3 Answers

I have a 2008 Wildfire Scooter 150cc. The carburator has an overflow tube coming out the bottom and gas just pours out of it when I try to start it. I have check all the tubes and the spark plug they seem...


My 150 carb has the same overflow and is stop by a needle vale screw is it there or missing replace the screw and it should run or plug the hose so it can not run out of the carb.

Sep 13, 2010 | Health & Beauty

4 Answers

Ok i have a 2008 chineese 150cc scooter with 2300 km on it it has ran fine till just recently like a snap of a finger it dosent run right when you first start it it fires right up and idles just fine when...


I assume it is a 4 stroke engine, so this is a probable fault coming due to the carburator.You may need to strip down the carb and give it a good clean.Also make sure there is petrol running smoothly to the carb.It seems a problem with petrol flow or air intake.Both has the same end problems.Now if this is a 2 stroke engine then it may have a problem with the valve, could be the cause of a broken blade.Good luck with it.

Apr 24, 2010 | 2008 HM CRE F500XI

1 Answer

I have a 150cc jonway scooter. When I open it up


I found that if I run 87 octane gasoline the engine accelerates up to full speed without the skipping and bogging down at any point it is running. It is worth trying. also try putting some "Sta-bil" fuel stabilizer in the gasoline - it has the ability to keep the carbureator cleaner. Not just during the time you are storing it, but rather all the time.

Mar 18, 2009 | 2008 Keeway F-act 150

Not finding what you are looking for?
2008 HM CRE F500XI Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top HM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...