Question about 2002 Hyosung GV 250 Aquila

1 Answer

Got a hyosung gv250 that wont run..just cleaned the carbs and fuel is making it to the carb...im thinkin it could be it not getting spark...any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not sure if this is still an issue as it's an old post but have you tried checking for a spark?


-Take your spark plug out,
-attach the ht lead to it,
-Hold it with a pair of INSULATED pliers so that the metal tip of the spark plug is earthing by touching it to some bare metal e.g. the cylinder head,
-Crank the engine and look for a spark. (Be careful about earthing it near the hole in the head where the spark plug fits as there may be petrol vapour present which may ignite).
Do this for both cylinders

Posted on Aug 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Hyosung GV250. At 5500 rpm, the engine stutters. This is most noticeable when under a load like going up a hill. Once you get beyond 5500 rpm, it is fine, but it takes it a little whi


Hi Larry, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.
http://www.hyosung.com.au/downloads/manuals/GV250.pdf

May 10, 2012 | Hyosung GV 250 Aquila Motorcycles

1 Answer

Recently bought 2005 Hyosung GV250. Front cylinder seems to be flooding badly, fuel sprays from exhaust!!! Have checked and cleaned carb and replaced plugs. Still not working


the float is still not seating to stop fuel into the cyl also if the peacock is dirty or bad it will let fuel leak when off the tanks are famous for rust which puts juck into the needle with the float not letting it seat it only takes a micro grain to not let it seat i would clean the carb again start with carb cleaner first running it hard spraying to see if it clears , i had the same issue and played with it and it cleared up though now i need a screw that broke where the needle from the rubber pump goes which isnt sold as a part looks like homemade modification action or $400 to $600 for a new carb

Aug 16, 2011 | Hyosung GV 250 Aquila Motorcycles

1 Answer

Bike bein sitting for a year and half and wont start now


Well if it has been sitting, check your main things ie: you have a good or new battery, all your fuses are intact,make sure you drain all the old gas out of the bike and try to clean the carbs with some carb cleaner. It sounds like if it is not a bad battery then your gas has turned bad on you in which case it wont start until you clean it all out and put fresh gas in it.Also make sure you clean the spark plugs and check for spark.Good luck.

Aug 02, 2011 | 2008 Hyosung GV250

2 Answers

How do i synchorinze the carbs on the Hyosung GV250.


You will need a monometer with with separate connections and readings for each carb. You will then need to make adjustments to each carb's butterfly until all of the monometer's readings are equal.

Jun 26, 2011 | 2003 Hyosung GV 250 Aquila

3 Answers

2002 Hyosung GV250 running problems


Time for carb cleaning , blow the jets with compressed air,check the float level.
Check the spark plug and replace if neccessary.
Check the air filter too, and if you don't have an 'inline' filter for your fuel line,install one.
Basically yr bike's engine needs a tune up...check the valve clearance too!
Hope this helps!

Oct 30, 2009 | 2002 Hyosung GV 250 Aquila

3 Answers

Gv 250 wont stay running


read my solutions on this site for clogged carbs.....Tim

Jun 01, 2009 | 2002 Hyosung GV 250 Aquila

Not finding what you are looking for?
2002 Hyosung GV 250 Aquila Logo

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...