Question about 2005 Honda CBF 250

1 Answer

I have make season cleaning an my CBF250 and i removed the 2 cabels from battery to starter /+ and - pole/ and now i dont now where must i make place the / - /pole cabel.

Posted by on

  • epura2 May 11, 2010

    Here is your solution » Honda »
    Suzuki » Yamaha » kawasaki » Others a



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 330 Answers

(+) cable goes to start relay, the (-) goes to the frame.There may be some other smaller wires too,follow where they go to help figure which they are.If they are (+) they should have a fuse too.

Posted on Apr 26, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How many bolts are there to remove a starter

2 bolt hold the starter in place and after you got 1 or 2 nut to remove the wires on the starter selenoid dont forget to disconnect the battery cable before doing it don since you didnot mention the model that the basic i can tell you

Mar 29, 2015 | Cars & Trucks

1 Answer

How to remove starter honda cbf250

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to replace the starter motor on Honda CB250
Starter motor fried
Honda CBF250 Owner Manual

Feb 04, 2014 | 2006 Honda CBF 250

1 Answer

My mazda is set on the sign of the steering wheel with the! Q IS LIKE TO KNOW PLEASE HELP ME

Power stearing rx 8 2004 You need cleaning the two gray plugs below canister air filter. One plug have 2 power cables and other plug have four or five cable. You need electric contact cleaner and cleaning both plug terminal pins Verify the contact must be very clean. The more important is the hose for drainage from the coolant bottle. This is the principal cause of throuble. This is a short hose for drainage. When the car is hot, the hose drainage vapor and drops coolant. This vapor and coolant impact the gray plug and the cable is hot. This causes shutdown of the power steering. change the hose to a longer one so it wont drop fluid on to electrical harness. For finish remove the negative battery cable for reset the electrical system. cleaning the main fuse of power stearing on positive pole of battery. Check the contact this needs to be very clean. check the pole of battery. cleaning both poles if necessary change battery connection. Hope this resolves the problem if not please take it to a qualified technician as you dont want to mess around with steering or brakes for that matter.

Jan 19, 2013 | 2004 Mazda RX-8

1 Answer

How to take off the starter

Thats he motor its located between the engine and the firewall, mounted directly on the engine..

1.) remove the negative pole form the battery.

2.) remove the top bolt holing the starter to the engine,

3.) swing the starter down and remove the electrical wires from it, label them so you will know what goes were.

4.) remove the bottom bolts holding h starter in place.

5.) install the new one in reverse

Dec 29, 2012 | 1987 Cadillac Fleetwood

1 Answer

How do i replace a starter on a 110 yamoto 4 wheeler?

starter should be in the front of the motor if not track down the starter remove the negitive cable on the battery and two bolts on the starter remove the starter wire and pull the starter out replace starter and replace neg battery cabel...

Jul 20, 2011 | Garden

1 Answer

I have a riding mower that will not turn over. I used jumper cabels attached to my car, stupid I've been told. I have done this before and the mower will start. When attached the mower engine will...

it is hard to say exactly what the problem is, but it sounds like the starter, starter solenoid, and or a charging problem. 1. last year I am assuming that the battery was low on charge and once you jumped it, it would start with the key for the rest of the season? if yes your battery should be OK just make sure at the end of the season you disconnect it and store it some where cool but not freezing. if you had to jump it all the time the battery and charging system has problems,(cables)(?). 2. if you have to use the car to jump the mower make sure the mower and car are both 12 volt systems, and the car should not be running. 3. make sure the battery is fully charged and there is no corrosion between the cables and connections. 4. once you do the above you can jump the solenoid to see if the starter is bad, if it moves it should be good, if you have to jump the solenoid make sure the mower is in neutral and the wheels are locked so it cant jump forward. also make sure all your safety switches are engaged, most mowers have switches on the seat, the blade engageing handle, and breaks.
The lights might have a bad connection at the battery, follow the wires from the lights for fuses and check them, some models have to be started before you can turn the switch back to turn the lights on.

May 13, 2011 | Garden

1 Answer

How do i remove the starter and put a new one on (1965 riviera)

first thing remove positive battery cable from battery then trace the cable down to the starter. Then remove the attaching electrical cabels and remove the few bolts tat hold the starter on. installing is reverse

Mar 08, 2010 | Buick Riviera Cars & Trucks

1 Answer

Yard Machines by MTD..Riding lawnmower starter draws energy from battery but doesn't turn. Never replaced a starter. Don't know for sure where it is and what's involved.


Oct 07, 2009 | Garden

1 Answer

91 buick was running good cleaned battery cabels now will not start no spark

1.Make sure all connection to the battery are secure opposite end of pos/neg connections connecting to the starter and and ground are also secure and clean..
2.Try jump starting the car.
3.If step one or two did not correct the problem, have the battery tested and re-charge the or replace the battery if required.
4.If the above three steps do not correct the problem, before starting the car, gently tap on the starter with a small hammer, then try and start the car. If the car starts, you have a faulty solenoid in the starter, which indicates the starter needs to be replace. Please rate this solution if you found this helpful.

May 14, 2009 | 1991 Buick Park Avenue

2 Answers

No power when I try to start bike, just a click…

Check the battery connections. Remove, clean and reinstall them. You probably had them off doing the wiring and they aren't making a good connection now. Always remove the negative first and install it last.

Nov 20, 2008 | 2001 Harley Davidson FXDL Dyna Low Rider

Not finding what you are looking for?
2005 Honda CBF 250 Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76848 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides