Question about 1991 kawasaki ZZR 600

1 Answer

My friend just bought a 1991 Kawasaki zx 600 -c4 16 valve twin cam ninja that was sitting for about 7 yrs so the guy said, well I put new plugs in cleaned the air box that had a mouse nest in it and started it after a new battery. it sounds like it runs on 2 cyl and pops when you rev it up and does not idle. I can fix a Harley but not one of these, like I said he is a good friend and don't have much so any help will be greatly appreciated. this is his first bike and just got his permit.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,100 Answers

Only one thing to do, take off the carbs and soak them real good, get the gum out, and make sure the jets are clean, so you can blow through them, some of that gas gets in there and dries hard as a rock. You will need a piece of wire to bust it out, don't try drilling it, I tried once, I made a diesel. A guitar string works good, about .009 is the smallest, you can get them at the music store out of the garbage. I would get a whole set, then you have some stiff wires for cleaning such things. It should do it. I think most jets are fixed,. You might need an air flow meter to make sure all of them are the same. Hope this helps.

Posted on Apr 23, 2010

Testimonial: "I will start on that job tomorrow I have had it for today. that's about the only thing I didn't do thanks for the assist. "

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to find out how to put wiring on


Kawasaki Motorcycle Wiring Diagrams

www.classiccycles.org/1852/597943.html
Kawasaki BN125 Eliminator 125 Electrical Wiring Harness Diagram Schematic HERE... Kawasaki GPX600 Ninja GPX 600 Electrical Wiring Harness Diagram ...Missing: tpgs

Kawasaki Motorcycle Service Manuals

www.classiccycles.org/1852/1894.html
Kawasaki BN125 Eliminator BN 125 Workshop Service Repair Manual HERE ...Kawasaki GPX600 Ninja 600 Electrical Wiring Diagram Schematic 1988 to 1991 ...Missing: tpgs

WIRING DIAGRAM thread for all sorts of bikes - Bike Chat Forums

www.bikechatforums.com/viewtopic.php?p=2322761

Oct 11, 2009 - 25 posts - ‎7 authors
this is the new wiring diagram thread, requests allowed .... http://i574.photobucket.com/albums/ss182/hmmmnz1/Honda/th_cb600f.jpgCB600f ...Missing: tpgs

Jan 27, 2016 | Motorcycles

1 Answer

1999 ninja 600 will not shift to forth or fifth


Hi, Mathew and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return springs weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Wont Upshift into 3rd or 4th
http://zx6r.com/zx6r/38529-bike-will-not-shift-up-into-2nd-any-higher-gears-please-help.html
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

Mar 30, 2013 | 1999 kawasaki ZX-6R Ninja

1 Answer

I have a 1986 zx 600 ninja and its hard to start when its cold I have to use starting fluid but after running even for a min it starts great


Your problem is that your valves are not properly adjusted; had the same problem on my 1985 Ninja 600 - the colder the ambient temperature got the harder it was to start. After a valve adjustment it fired right up even in freezing temperatures very reliably.

Feb 18, 2012 | 1987 kawasaki GPZ 500 S - GPX 500 R

1 Answer

How much is the cost of kawasaki ninja 250 R?


Hi friend,,,
welcome to fixya

It costs about 8500$,,\

IT HAS FOLLOWING SPECIFICATIONS:

1.Compact DOHC Twin cylinder engine. 4 valves per cylinder. Lightweight alloy cylinder head. High-compression, lightweight alloy pistons. Advanced liquid-cooling.
2• Maintenance chores are minimized with an automatic cam chain tensioner, silent-type cam chain, low-friction coating on chain guides, plus a low-maintenance battery.
3• Easy-to-select 6-speed transmission with Kawasaki’s convenient Positive Neutral Finder.
4• Diamond high-tensile steel frame and advanced suspension components including the single shock UNI-TRAK® rear suspension system.
5• Stainless steel disc brakes front and rear. Balanced Actuation front brake caliper for consistent wear and performance.
6• Light overall dry weight, low seat height, electric starter, rider-friendly ergonomics, and a 4 gallon (18 L) fuel tank make the 250R a great introduction to the world of sportbikes.
7• Comprehensive instrumentation includes large speedometer and tachometer.
8• Retractable bungee cord hooks add convenience and style.

if your satisfied with my solution PLEASE RATE IT

thank u...

Apr 09, 2010 | 2008 kawasaki Ninja 250R

2 Answers

I have a 1988 kawasaki zx 600 and i need to find out what fuel line goes where on it


The fuel line usually goes from under the gas tank straight to the fuel filter, then to the carbs.

Oct 18, 2009 | 1998 kawasaki ZX-6R Ninja

2 Answers

How to do a tune up on a 2000 kawasaki zx-6r


balance carbs, check valve clearances, fit Iridium plugs, any more will need dyno jet kit

Oct 06, 2009 | 2000 kawasaki ZX-6R Ninja

1 Answer

99 kawasaki 600 no fire compression on 2 cylinders


broken crank shaft, broken piston rods, broken cam

Jun 26, 2009 | 1999 kawasaki ZX-6R Ninja

1 Answer

Bike wont start


If you can't find another similar connection on the new motor, you might need to swap heads (if it's the same exact motor).

Jan 14, 2009 | 1999 kawasaki ZX-9R Ninja

Not finding what you are looking for?
1991 kawasaki ZZR 600 Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...