Question about 1991 Yamaha FZR 600

1 Answer

Clutch lever handle is not easy to pull in and release

Hi i have a 1992 fzr600 and the problem i am having is the side with the friction plates. when i put the cover on the lever handle will not move. when i take it off the handle pulls easily but does not release all the way. is there a piece that should go in the middle of the pressure plate? how is it all really assembled i have the steel and friction plates on right but i not sure how tight i am suppose to tighten the screws with the springs. i screwed them down all the way. is that wrong? are they to be adjusted only so far? please let me know thank you

Posted by on

  • al_yeah Apr 24, 2010

    the video i was directed to helped 100% thanx

  • al_yeah Apr 24, 2010

    the video i was directed to helped 100% thanx

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,851 Answers

Hi,
Congratulations on a great bike and one of the fastest pound for pound anywhere.
The Clutch is a fickle adjustment. CLICK HERE for the best overall clutch basics available. This is not specifically your bike but I am very sure this will guide you to a total repair.
Thanks for allowing me to help.
clutch lever handle is not easy to pull in and rel - b29b6fb.jpg

Posted on Apr 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clutch on my 1967 ironhead will not release


Hi Anonymous, and the usual suspects are:
1. Incorrect clutch release adjustment.
2. Worn clutch release worm and lever.
3. Excessive clutch spring tension.
4. Gummy clutch friction plates.
5. Warped clutch steel plates.
6. Badly worn or damaged clutch sproket keys.
Visit the website below for an almost free ($7.00) download of a 1959-1969 sportster service manual which you will need for a clutch adjustment. Good luck
1959 1969 Sportster Factory Service Manual 99484 69

Apr 07, 2014 | Harley Davidson XLH 1000 Sportster...

1 Answer

1990 ducati 750 sport clutch . steel and friction plate installation sequence


Hi, Shane sorry you can't find the first and best tool you ever bought for your Ducati despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
ducatipaso org View topic Paso 750 clutch plate sequence
How To Replace Ducati Dry Clutch Hub Clutch Replacement
Free Ducati Motorcycle Service Manuals for download
Ducati OEM Parts Fiche Lookup and Online Ordering
Ducati Maintenance

Dec 13, 2011 | 1990 Ducati 750 Sport

1 Answer

Tri z started and put in gear and in jumped and stalled. I started againg with clutch handle pullled in and started and it jumped and i didnt let it stall drove it around and shifted gears but was very...


It sounds to me like a part is missing in the clutch assembly. Bear in mind that the first plate installed in the clutch assembly is a cork friction plate, then metal, cork, metal, ect.. You should end up with a cork friction plate. There should be 6 metal plates and 7 cork friction plates. The diagram below is a tri-z 250. Please rate my answer. Thanks! tombones49_199.gif

Jun 27, 2011 | Yamaha YZ 250 F Motorcycles

1 Answer

Put clutch into gear but no movement


Replacing the clutch is fairly easy on most motorcycles. A factory repair manual is helpful and suggested, but in a nutshell, here's the proceedure.
There is a round cover on the right side of the engine, this is the clutch cover. After draining the oil, remove the cover and this will expose the clutch pressure plate that will be retained with a number of washered bolts and springs. Remove the pressure plate, and the clutch plates can be removed. There will be alternating friction and steel plates-remove them all and keep them in a stack in the order they were removed. Soak the new friction plates in oil before installation. Install the new plates starting and ending with friction, alternating a steel plate in between.Be aware that some motorcycles have a different first and last friction plate, your parts dealer should know that when you buy the parts.
After it's stacked reinstall pressure plate with new springs, bottom out the washered bolts and no additional torque is required. Reinstall cover with new gasket, fill with oil and adjust clutch lever so it has enough slack to slide a quarter in between the lever and perch. Good luck!

Jun 07, 2011 | Honda VTX 1800 R Motorcycles

1 Answer

Clutch locked up on my 82 Suzuki dr250 I am at a loss what should I do.


your clutch is simply a stack of friction disks and metal plates. The friction disks are splined into the outer hub ring and alternate, one friction disk / one plate / one friction disk / one plate etc. It's very simple to free this up if it's locked up. remove clutch cover. If you are unsure which is your clutch cover, follow the clutch lever cable to the actuator arm. remove the cable from arm and all bolts holding the cover. as you pull out the cover, you will see the arm rotate that's because it's geared into an arm that is connected to the front plate of the clutch basket assembly. You'll see it as soon as you pull it off. now you'll be looking at a round plate with 6 bolts with springs underneath. when you arent pulling the lever, these springs are extended and push the friction disks and metal plates together, thereby locking the inner hub to the outer hub. The inner hub is connected to the crank, and the outer hub is connected to the transmission input gear. So, if pressed together by the springs, your engine running causes your bike to move. Pulling the clutch lever in pulls the spring tension off the plates and allows them to separate. This allows your engine to be disconnected from the transmission. If your plates are locked together you will remove them one by one if you can and lubricate between each plate and disk and reinstalling. Pay close attention to how it came apart. Reinstall bolts and springs reinstall cover, aligning the lever gear teeth with the front of the clutches teeth correctly. put it all together and see if you are okay now.

Nov 23, 2010 | 1988 Suzuki Rg 250

1 Answer

Rattle and slippage when engaging clutch, only when hot after a ling ride. does not rattle or slip at all when clutch is fully engaged.


Clutch plates may be worn. You would have to pull the side cover to inspect them. Honda clutch's always rattle at an idle when in neutral. If you just pull in the clutch lever the rattle will go away. Let the lever out and it will rattle again. As for the slippage, if your clutch cable is binding at all it will keep the clutch from fully engaging when you release the handle. This will cause the clutch to slip for a second or two until the cable fully releases from the bind. Any resistance in the cable and you should replace it.

Aug 04, 2010 | 2003 Honda CB 250 Nighthawk

2 Answers

2007 yz450f has a low rumble when clutch is out all the way


The bearing for the clutch outer drum may be worn. The adjustment on the handlebars is to set lever free play(about 1/2 inch) before the cable becomes tight and operates the clutch release inside. Make sure the outer drum cover is tight--check with the clutch lever to make sure the plate releases the disks and plates.

Oct 28, 2009 | 2004 Yamaha YZ 450 F

1 Answer

Yamaha fzr 1000 exup 1990, bike's been standing for about 2 years, it start's and run's great but the clutch will not disengage, feel good at lever.


this happens after they sit a while, get her started, get her rolling, put her in second gear, hold the clutch in, get her up to 20 miles an hour, hold a little throttle on and slam on the rear brake, this usually will free up the stuck friction plates. If not try it a couple of times, it has always worked for me, also if that does not work for you you have to take the side cover off of the engine (clutch side) and using a flat headed screwdriver, and a zip tie to hold the clutch lever back to the handle bar, place the screwdriver in between the clutch plates and gently pry them apart from each other, on your bike I believe you have 7 friction plates and 6 steel plates. ( if you have to remove the cover go get a gasket first).

Jul 05, 2009 | 1992 Yamaha FZR 1000

2 Answers

Bike stays in gear with clutch in


You are saying that with the clutch lever pulled in the bike still wants to go forward. Generally that is caused by dirty, gritty oil in the gearbox. Go ahead and change the oil. 10w40 motor oil is what you want. I think that will fix the problem assuming the clutch plates were installed properly. The first plate installed and the last plate installed should be a fiber friction plate, 8 plates total. A metal pressure plate goes between each fiber plate, 7 plates total.

Be sure the lever assembly arm is installed so that it gets full movement of the clutch cable. If the full range of movement is not present then full disengagement of the clutch is not going to happen.

cape cod bob did you a good service in the manual referral. Be sure to say thanks.

Apr 16, 2009 | 2003 Yamaha YZ 125

3 Answers

I have 2003 kawasaki kx 125 when you put it in gear with clutch in it jumps forward and dies. where do i start with this?


make sure clutch ,is disengaging properly when you pull in clutch lever,adjust lever until you have about 1/8" freeplay.if still not disengaging, you need to drain gearbox oil, take clutch cover off & inspect clutch pack, you may have friction plates sticking together.

Feb 18, 2009 | 2003 kawasaki KX 125

Not finding what you are looking for?
1991 Yamaha FZR 600 Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...