Question about 2003 Hyosung GV 250 Aquila

1 Answer

Electric fan on my 2006 GV650 is not turning in

The electric fan on my 2006 GV650 is not turning on. what needs to be checked?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

There is a sensor on the radiator some where , unpug it an test with a ohm meter an see if its make..if not replace it..

Posted on Apr 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Buick overheating. The thermostat is new. Is their a coolant temperature sensor on the 2006 North star engine?


Have you checked to see if the fans are working ? One way to check is by turning your A/C with vehicle running. The fans should run even if the car temperature is cold.
If fan does not work, may want to begin diagnosis on electrical wiring and power supply to fan relay, temperature sensor and fans.

Jun 26, 2017 | Buick Cars & Trucks

1 Answer

Engine would not start and now the battery is swollen


Hi check polarity of battery ,2 look at the wiring loom look for cable damage shorting burning ,3 I think its more than likely this , you need to ask why when you hit the kill switch did it not shut off ,4 check the rectifier , also ask did you get anything done fitted eg alarm lights ,to swell the batt then it had to get an unusually high charge in reverse please let me know how you got on

May 25, 2014 | 2006 Hyosung SF 50

1 Answer

My 2006 320D BMW does not give suffient cooling when turning on the aircondition.


Open the hood and then turn on the ac. The electric auxiliary fan must come on. If that fan is not on( not the center belt driven fan but the small electric one) then that is the problem. replace it. If the fan comes on, check the freon pressure to make sure it is adequate.

Sep 02, 2013 | 2004 BMW 3 Series

1 Answer

2007 Hyosung GV650 does not want to start after hazard relay burned


Hi, Marian the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://thelifeofdead.blogspot.com/2014/03/hyosung-gt650r-known-issues-and-remedies.html
2008 Hyosung Starting Electrical problems
HYOSUNG Aquil GV650 Service Manual
https://www.alpha-sports.com/Parts/H_GV650.htm
HYOSUNG GV650 User Manual

Jul 05, 2017 | 2007 Hyosung Avitar GV650

1 Answer

I replaced my NGK CR8E spark plugs with the new NGK CR8EIX Iridiums on my 2009 Hyosung GV650...and immediately after starting up the bike, I heard an electrical buzz in the front of the bike and shortly...


Hi, Skjc01 before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2007 Hyosung GV650 Avitar turn signal buzzer intalled
2006 Hyosung LED Turnsignals Fix
HYOSUNG Aquil GV650 Service Manual
HYOSUNG AQUILA GV650 CATALOGUE Manual
HYOSUNG GV650 User Manual

May 01, 2017 | 2011 Hyosung GV 650 SE

1 Answer

Hello yes my name is Jesse and i have a 2006 gv650 and it is blowing white smoke out of the exhaust pipe from the tip to the first part of the pipe underneath the seat/ it's the part right above the...


Hi, Dragonace218 your instrument gauges and lights can alert you to most electrical and engine issues they can not warn you about failed engine gaskets or seals so your engine has to resort to old fashion alert methods of colored "SMOKE SIGNALS" here is a breakdown of their meaning:
1. COLORLESS OR SLIGHTLY BLUE SMOKE on start-up means your air/fuel mixture is at the right composition and everything is well burnt in your combustion chamber.
2. BLUE SMOKE on startup is usually caused by failed valve seals dripping oil into the combustion chamber when the engine is not running.
3. YELLOW OR BROWNISH SMOKE at start-up means your air/fuel mixture is too lean. Too lean means that there is low fuel but high air mixture in your combustion chamber.
4. WHITE SMOKE on startup may be caused by a blown head gasket allowing coolant to enter the combustion chamber and may start dripping out of the exhaust pipes or mufflers. Smoke while riding is usually caused by worn out or damaged valves, seals, guides, pistons, rings, or cylinder walls.
5. BLACK SMOKE on startup is usually caused by too much fuel in the combustion chamber this can be due to air/fuel mixture adjustment too rich, accelerator pump improperly adjusted, faulty choke/enrichner or not in the off position, air filter dirty and clogged, faulty carburetor float needle and seat, pilot jet too large, fuel injectors leaking, smoke while riding is usually caused by the main jet being too large or a damaged carburetor.
It should be noted that aggressive or abnormal throttle operation will cause these conditions to manifest themselves exponentially.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the links below. Good luck and have a nice day.
http://korider.com/index.php?topic=22928.0
https://itstillruns.com/troubleshoot-motorcycle-exhaust-smoke-7671630.html
HYOSUNG Aquil GV650 Service Manual
HYOSUNG AQUILA GV650 CATALOGUE Manual
HYOSUNG GV650 User Manual

Jul 31, 2017 | 2006 Hyosung GV 650

1 Answer

2006 aerio, car will not crank. all fans come on when key turned


Check ground wires from engine to body and battery to body. Poor ground can cause all sorts of electrical problems

Jul 23, 2010 | 2006 Suzuki Aerio

1 Answer

Any ideas how to de restrict hyosung gv650 or


The most common way is move the throttle cable from position one to position two. Check to see if this method will work for you by watching the throttle mechanism at the engine while an assistant turns the throttle (engine not running). When the assistant can turn the handle no farther, see if you can push the mechanism open farther with your finger or a screwdriver. If you can, then you will be able to derestrict the bike by repositioning the cable.

Jun 20, 2009 | Hyosung GT 650 Motorcycles

Not finding what you are looking for?
2003 Hyosung GV 250 Aquila Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4825 Answers

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...