Question about 2005 Honda CRF 100 F

1 Answer


i took my carb apart to clean it and put it back together no problems but the small dark cylynder that goes inside the carb with the throttle cable attatched to it it messed ..... i accidently pushed the needle in it up and it moved this "A" shaped thin metal piece with hooked ends on it out of place, what way does it go back in around that needle thing does it go under the big spring or what?


Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

Not sure but sounds like you are talking about the clip that holds the needle in place.
you need to know which slot the clip was in and put it back on the same one.
get online and type in the make of the carb.
lots of info out there and good parts breakdown pictures that can help.
good luck

Posted on Apr 22, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Marcy Upright Fan Cycle - Fan Hitting Cage As It Spins

You did great with the assembly, however, you're off on the alignment. Try to adjust to pull the axle in the opposite direction to clear the cage.

Nov 11, 2013 | MARCY MCPL 105 Upright Fan Bike

1 Answer

I have a super pocket bike x 7 110cc kick start and electric start my carb was leaking bad from the overflow i took the carb apart and cleaned it jets to and put it all back together overflow dose not leak...

hey Steve, you put the carb back together incorrectly somewhere.. take it to a qualified professional, let him check it and reassemble it... it wil be fine after doing this... --Check the air filter.. make sure its clean...

Jul 26, 2017 | Motorcycles

1 Answer

Harley wont start and has fuel running out of the exhaust and Carb

Hi Ken, you need to overhaul your carburetor, for more information about your question please visit the website below. Good luck and have nice day.
Harley Davidson CV Carburator rebuild and float adjustment ep 18 eng Roma...

Mar 18, 2012 | 2002 Harley Davidson FLSTC - FLSTCI...

2 Answers

How to rebuild a 22r carburetor

This Carb was using in Toyotas (i.e. 87 PickUp), according with this, check this removal ans installing ptocedure.

1 Disconnect the negative battery cable.
2 Loosen the radiator drain plug and drain the coolant into a suitable container.
3 Unscrew the mounting screws and remove the air filter housing. Disconnect all hoses and lines leading from the air cleaner.
4 Tag and disconnect all fuel, vacuum, coolant and electrical lines or hoses leading from the carburetor.
5 Disconnect the accelerator linkage from the carburetor. On cars equipped with an automatic transmission, disconnect the throttle cable linkage running from the transmission.
6 Remove the four carburetor mounting bolts and lift off the carburetor and its gasket.
Cover the manifold opening with a clean rag to prevent anything from falling into the engine.

7 Install the carburetor (with a new gasket), tighten the mounting bolts EVENLY in steps and reconnect all linkage.
8 Start the engine and check for any leaks. Check the float level.


Fig. Exploded view of the carburetor-22R engine (click THIS LINK for zoom)
In addition, I suggest visit THIS LINK for other details.

Hope this helps (remember to rating this free answer).

Oct 07, 2011 | 1985 Toyota Pickup

1 Answer

After priming engine stops after about 10 seconds Toro 22 in recycler model 20070

Your lawn mower is not meant to be run on fuel that contains ethanol. To fix your problem you have to remove the carburator and take it apart,get some carburetor cleaner the one with the plastic tube for spraying with pressure work over a small bowl or container spray the carburator through all of its ports and openings clean the carburetor till there is no build up ( build up usually apperars as discoloration on the metal then pour some carb cleaner into the container and let it soak. after soaking over night put the carburetor back together and reinstall with new gaskets as the ones that go to the block are usually hard and will tear just enought to let air in after putting together add a fuel additive to your gas they sell it at any Home and Garden store this will keep the ethanol from turning to gum again. When putting the lawn mower up for the season drain the fuel system or add extra additive to the fuel and prime it through the carb. This will solve your problems ,just make sure that you keep track of the way the diaghrams come out of the carb and put them back in the same order

Oct 03, 2011 | Toro Power Lawn Mower

2 Answers

I have a Murray Riding Mower won't start. I took

clean fuel line and carburator out real well with a good quality carb cleaner this should do the trick,take the carb apart to do this check needle valve where gas comes in to the carb bowl it is alot of times plugged up

May 29, 2010 | Briggs & Stratton Garden

1 Answer

Took apart carburetor and can not get it back together

Your best bet would be to go to the auto parts store and get a rebuild kit for your carburator. You can't reuse carb gaskets anyway and the kit will include a blow up diagram of the carb with the parts that need to be replaced and steps to make sure you have the proper settings inside.
Carburators are precise so all measurements they give you in that kit are exact.Take your time. If you took the idle screws out of the front be very careful when you put them back in. Just turn them until the stop, DO NOT tighten them after they stop on the seat.They are soft and will lose their shape, making it hard to properly adjust. Hope this helps and good luck.

Mar 06, 2010 | 1985 Ford F150

1 Answer

Starts and then cuts off

Take the engines carburator off and apart and clean with a carb cleaner like Gumout(auto parts store), put back together and will fix problem.

Feb 16, 2010 | Troy-Bilt Garden

1 Answer

Need the carburetor assembly manual

It is either a Walbro or a Zama carb. I think both mfrgs have a website w/ parts breakdowns. But both carbs are the same as to the placement of diaphragms + gaskets. On the side with the inlet needle the gasket goes on first and then the metering diaphragm. On the fuel pump side the diaphragm goes against the carb body and then the gasket before the cover.

Aug 10, 2009 | Troy Garden

1 Answer

Had infamous extra part once I put my steam cleaner back together

Steve, The o-ring goes inside the turbine assembly on the metal shaft.

Mar 20, 2009 | Hoover F7220900 SteamVac V2 Upright Vacuum

Not finding what you are looking for?
2005 Honda CRF 100 F Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75822 Answers


Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides