Motorcycles Logo

Related Topics:

Posted on Mar 21, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I was riding and everything was working normal. then i lost about half my power and it sounded rough. the power would come back only momentarily but would disappear again. it was jerking when that happened. at stop lights at regular idle range my rpms would drop low to the point where i thought it was gonna die. starting from a stop is tough because the bike wants to die out and take offs are very slow.

1 Answer

woozie38

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 608 Answers
  • Posted on Mar 21, 2010
woozie38
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Mar 16, 2010
Answers
608
Questions
3
Helped
229026
Points
1829

You bike is missing on one cylinder. Since it comes and goes, it could be a spark plug or plug lead. This is the easiest solution, but there could also be a problem with the fuel injection system. Fit new plugs and test the plug leads. If the problem still exists, have the fuel injection system checked out.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What part do I need to replace

Hello. What you are describing is a failing component on the power supply. Some part is working momentarily and then heats up and fails. Replace the power supply and you will likely fix the plotter. Power supplies can be ordered from: 0950 2623R HP Designjet 700 750C 755CM Power Supply
0helpful
1answer

My tahoe is completely dead the battery and alternator tested good. prior to it dying the lights and the a/c would occasionally glitch out.

Test your positive and negative cables for continuity. Sounds like you have a cable not doing the job. Also be sure to check connection is secure
0helpful
1answer
0helpful
1answer

Kohler ch18f revs up and down at half throttle. is this normal?

No this isn't normal. Sounds like high speed adjustment is to lean. Back it out counter clock wise with machine running until it smooths out.
0helpful
2answers

I just bought this bike a month ago. It is an '03 VTX 1800. I went on about an hour and a half ride and during the ride when I got to about 60 mph the engine would sputter and loose power at points. I...

Electrical ... check points. You jmight want to run some carb cleaner through it ... change the plugs. Id look at the points or what ever turns the coil on and off, real close.
0helpful
3answers

Have an emachines e550 does not play sound

You need to go to "control panel, than to "system properties", than to "device manager", ( than to "hardware" if you are using windows XP)

Click on "sound". If you do not see any "red X's" than your sound drivers are working fine.

After that, check your sound cord and power cord. Verify your sound is not muted or turned down.
0helpful
1answer

MY FI LIGHT COMES ON WHEN RIDING ON FREEWAY SPEEDS

Seafoam try it...local autozone sells it...i put in 1/3 can to two gals..it'll run a little rough for a while but after hitting it hard for fifteen miles you should notice a dramatic improvement. the hesitant and horse power came right back to normal.
0helpful
1answer

I have a Panasonic TAU CT-27SC14J TV lost sound

Ur video/Audio board have a short or lose a connections.Must take it aparts retighten everythings,might even resoldiers the parts.
0helpful
2answers

Riding mower having problems starting then runs roughly

I would bet you have a fuel problem. Either the carb is clogged and dirty or needs adjustment. Try opening the screw on the bottom of the carbuerator about a half turn see if that improves it. Also check the air filter and clean it.
Not finding what you are looking for?

374 views

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...