Its a simple nut & bolt job .Not having owned one I assume its the same as most super bikes .There will be a pinch bolt or two on eack leg .these grip the main axel bolt which is normally screwed in one leg .There will be spacers ( Take care as some times these spacers are diffrent sizes ,so remember there position ) .You need to remove the brake cylinder .But you may find that the brake cylinder unit will not clear the brake disc because the inner wheel rim is stopping it .you have to release the fluid in the piston chamber and push the brake piston / pads back to get enough clearance to clear the disc .and if there is no centre stand you will need a bike lift unit to raise the whole bike off the ground to get the front wheel out.If in doubt seek advice from your main Kwaka agent ..
286 views
Usually answered in minutes!
×