Change starter on gl 1000 goldwing - 2004 Honda CBR 1000 RR Fireblade

coolant temperature sensor not working
fan fuses
fan relay
fan it self
wiring

try this http://tinyurl.com/m5d2n8p


http://binatani.com/gl1000-goldwing-wiring-diagrams-for-1975-until-1977/

Someone will answer your Gl 1100 Goldwing questions at this Goldwing site. www.stevesaunders.com.

On the left side of the bike, you will need to remove the gear shift.
This will allow the starter to be removed after removing to two retaining
bolts. Be carefull when removing the starter. There is a starter chain that will fall if the starter is not removed slowly.

The battery might be weak. Also there may be an issue with the starter solenoid

You need an SE oil, Wal Mart used and maybe still does sell a motorcycle oil (not their brand). You probably will need 30 weight or a multi viscosity (which I use 20-50). Buy a good oil, maybe a synthetic with that rating. Rear final takes 90 weight in most instances except cold weather. A parts house or bike shop will sell the right oil. Just buy the best oil you can, and keep it changed frequently & the wing will just about go forever, Hope this helps you with your scoot, Rick