I AM LOOKING FOR A MANUAL FOR A KAWASAKI VN 1500 CLASIC TOURER 2002

TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

My vulcan 1500 has one bolt that holds it on the fender. Nut will be on inside of rear fender.

No it will not work.
The 2000 part number is 21163-1271
The 1995 part number is 21163-1109

Sounds like thernostat or water pump

http://www.bike-paint.co.uk/kawasaki%202001.htm

this might have what you are looking for ?

hi buddy the standard size is 150/80-H16 thats the only size you can have

NGK are the best plugs to run in a Kawasaki. For gaping instructions contact a dealer.

you can get free pdf download of the nice service manual with everything you need to know

right here

http://www.carlsalter.com/motorcycle-manuals.asp

sounds like the needle and seat is not sealing.It is a common problem when bics are stored over winter.Either remove carb and clean nedle and seat or replace to be sure.