-
Master
2,220 Answers
- Posted on Feb 26, 2010
Re: Could I please have the basic start procudure for the...
Start Procedure
Cold:
- Ignition on/off to on
- Set compression release – optional step even if saw is equipped with a compression release
- Pull (close) choke, set fast idle (done when choke closed on some saws); pull starter and listen for an attempt to start. once heard (usually two pulls; no more than 4)
- Set compression release – optional step even if saw is equipped with a compression release
- Push (open) choke pull starter until it starts. (usually first pull)
Warm:
- Ignition on/off to on
- Set compression release – optional step even if saw is equipped with a compression release
- Pull (close) choke, set fast idle (done when choke closed on some saws) – Do not pull with choke closed.
- Push (open) choke, pull starter until it starts. (usually first pull)
Hope this helps
Lou
×