Hi
The cam dowel should be at 12:00. the hole in the cam sprocket should be line up with the cam dowel, with cam sprocket assembled to cam, you will see looking through the cam sprocket a red marking on the head, which lines up with the dowel. Down at the crank, make sure the cut out mark on the crank spocket is lined up with the notch on the oil pump cover.
Thanks for using FixYa - Steve
Testimonial: "Yes i would like to thank you very much. as you were very helpful. And once again i had looked so many different sites online. YOU CAME THROUGH."
362 views
Usually answered in minutes!
×