Question about 1976 Yamaha XS 500
Hi, Citrogalacti for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere $15 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
YAMAHA 73 74 TX500 75 78 XS500 TX XS 500 CAMSHAFT CAM TIMING CHAIN MASTER...
Yamaha XS500 Parts Accessories Parts More Japanese Vintage Motorcycle Parts
1976 1979 Yamaha XS500 Motorcycle Repair Manual PDF Download Manuals... $15
OEM parts for Yamaha
Posted on Oct 04, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: gladiator chain problem
I hate to give you the bad news but it is not likely the damaged sprocket is under warranty. The sprocket was not bent when it left the showroom floor and Yamaha Corporation has no control where and how you drive.
Chains should run true and not be forced to move side to side to fit a bent sprocket. The sprockets are hardened steel. It is not a good idea to bend them back and forth.
You didn't say which sprocket had the problem. A front sprocket will cost around $30 and a rear sprocket will cost around $60. Installation will also cost unless you do it yourself.
Please rate this solution. Thanks!
Posted on Mar 27, 2009
SOURCE: Yamaha warrior chain.
HELLO; Heres all you should have to do this,set your quad up on a atv jack or on a milk cartoon.Loosen the four bolts that hold the rear bearing carrior and back off your adjusters then push the carrier forward till it stops,relay your chain and adjust it leaveing a little slack, tighten your mounting bolts then, something I do, spin the rear tires to see if the slack is right if not loosen the bolts and proceed again with the proceedure turning out the adjusters a little more look at the chain as you dothis and you will see the slack in the chain on the top. GOOD LUCK.
Posted on Oct 01, 2009
SOURCE: Yamaha SR 400 timing chain
Hi There honzakot
Yup, SR400 and 500 are the same engine in this respect. Seems most top end parts for the 500 fit the 400. . Check this link (yoshimura) for some supporting evidence. sr400 jumps straight to the SR500 at Bike Bandit also.
Posted on Apr 19, 2010
The starter clutch needs to be replaced. At the other end of that chain is a wheel with a couple slots cut at angles. Inside each of these slots is a small cylindrical piece of metal. The whole unit fits over the end of the crankshaft and because of the angle of the slots those cylindrical pieces of metal (which move freely in the slots) will be forced against and grip the crankshaft when the starter is operated. If they become worn down they are no longer able to exert enough pressure on the crankshaft in order to turn it. Buying a starter clutch 2nd hand is not recommended. If you are unable to source one from a bike shop, try and have them made. Take the old ones to an engineering shop. Unless you know how to temper/harden metal of course.
Posted on Jul 26, 2010
Tips for a great answer:
Apr 17, 2014 | 1976 Yamaha XS 500
Jun 08, 2013 | 1976 Yamaha XS 500
Sep 10, 2012 | Yamaha XS 500 Motorcycles
Jan 24, 2011 | 1976 Yamaha XS 500
Aug 20, 2010 | 1979 Yamaha XS 500
Jul 21, 2010 | 1976 Yamaha XS 500
Mar 24, 2010 | 1976 Yamaha XS 500
Jul 23, 2009 | 1976 Yamaha XS 500
370 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: