Question about 2003 Husaberg Fe 400 E

1 Answer

Hi. My Husaberg fe 400e need 100 houers service. Is this expensive? And what parts do I need??? Do you know where I can get all the parts for a minimum of money..? In Norway they take about 2500 US Dollars for this sevice..!

Posted by on

  • Mr. Stock Feb 05, 2010

    ok. The dealer said that the engine needed a full makeover..! wiht all bearinga and even the pist needed to be changed!

    But I think that its a bit overkill..!

    I change the oil and filter every 10-15 houers:)


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

All it needs is fresh engine oil and run a spaner around it,,,just incase any thing is about to "drop off"

Posted on Feb 05, 2010

Testimonial: "LOL! I`ll do just that:) Thanks for the help.., You saved me some BIG money!!!!Q!"

  • Michael Thorpe
    Michael Thorpe Feb 06, 2010

    hi its miket756

    i would find another dealer the one you are going to is,,,

    a shark, a rip off, a proper robbing little sh*t, a stealing bar*terd!

    needs new pistons and bearings my foot! nice earner for him the thieving little towrag,,,just check all nuts and bolts are niped up fill with fresh oil and check the spark plug out, kick the tyers!!! and drive away,,,a happy chappy, with 2500 bucks in your bin,, how much is your time??? free!!! how much is the dealers time????

    200+++++ bucks an hour??? plus parts at megger prices!

    get yourself a book on your bike, buy some tools and service it yourself,,fun lurn and save cash! all the best! mike


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2013 Husaberg fe 350. After a top end rebuild the bike wont rev properly, is there a limp mode on these bikes and if so how do we clear it

Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Nov 11, 2015 | Husaberg Motorcycles

1 Answer

FE 390. Bike will not go into neutral with engine running. How to fix?

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day. DOWNLOAD 2010 Husaberg Fe 390

Oct 24, 2015 | 2010 Husaberg FE 390

1 Answer

I was fitting a after market tail light the other nite and had the engine running as to have power to identife wich wire did what (testing with a multi meter) and the engine stoped as if it was switched...

Hi, Jonti16 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables shorting or leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
No spark AGAIN
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
Husaberg 400 User Manual
HUSABERG FE 450 EU Owner Manual

Mar 16, 2017 | 2002 Husaberg Fe 501 E

1 Answer

Needing to find out how to set timming and get a workshop manual

Go to
Select "service", then "downloads", and look for your year, and the type of information you need.

Oct 12, 2010 | 2000 Husaberg Fe 501 e SM

3 Answers

Husaberg (FE 501-03)Stator problem

I have never heard of a stator preventing a motorcycle from starting. You need a professional, local, second opinion before you plunk down any bucks.

Unless that is, are you calling a magneto a stator? Does your motorcycle have a battery? If it has a battery, you probably do not have a magneto.

Dec 29, 2009 | 2003 Husaberg Fe 501 E

1 Answer

Hi i was ridiny my husaberg and it just stopped i have a spark petrol gettin threw tryed easy start and still nothing wot could be my problem

3 things needed to start a engine fire, fuel and air, so you have 2 of the 3 i would look at air line on carbs any splits on carb vaccum lines ect. hope this helps

Nov 10, 2009 | 2004 Husaberg FE 550 e

Not finding what you are looking for?
2003 Husaberg Fe 400 E Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts


Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Sean Colbert
Sean Colbert

Level 1 Expert

17 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides