Question about 2005 Hyosung GT 650

1 Answer

Backfiring engine on slowdown from medium speed.

Backfiring engine on slowdown from medium throttle, or slowing down for traffic lights, or corners, stopping, etc.. Bang bang bangbangbangbang. I am using standard unleaded petrol [ULP]. Evan Holt

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 425 Answers

Two things cause this problem, ONE: Your timing could be out a little and the bike needs a good tune, or TWO: your exhaust is cactus.

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a speed limit for airplanes?


There are some speed limits for certain types of airspace. Airliners are always in contact with air traffic control and in order to keep the required separation of aircraft sometimes the controllers will ask the pilot to maintain an airspeed. More than likely you experienced a slowdown while your plane was beginning an approach, During approach controllers have to maintain specific spacing between aircraft and often must slow them down behind slower aircraft. Your plane very likely was slowing down from approx 570 knots to 250 knots or less for the approach.

Jan 04, 2017 | Aircrafts

1 Answer

TRANSIT CUTTING OUT AT JUNCTIONS AND WHEN SLOWING DOWN IN TRAFFIC


check if this occurs under braking or when you have your foot on the brakes. If so check for a vacuum leak in the brake booster.

Jan 08, 2015 | Cars & Trucks

1 Answer

2006 diesel transit in traffic loses power even wants to stall at lights etc


This will sound silly but Diesel engines are very prone to dirty filters, this is the first thing I go to every time

Jan 01, 2014 | Ford Cars & Trucks

1 Answer

Engine pics


throttle position sensor try

Dec 21, 2013 | Cars & Trucks

1 Answer

MY VW SHARAN 1998 POWERS OFF WHEN I SLOW DOWN.


This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control. If the above cleaning doesn't cure your issues you need to have the computer controlled automatic idle speed control system diagnosed and repaired by a dealer or electronic engine control repair shop.

Nov 07, 2012 | Volkswagen Sharan Cars & Trucks

1 Answer

Basically I'm losing a lot of corner speed, when turning into corners. I shut the throttle off too early and it feels like I'm carrying the bike round the corner. If adjust the throttle mid bend,...


You need to accelerate very gently while you go round the corner. This sounds wrong but even if you hold the throttle in the same position, physics dictates that as you go round the corner you do actually accelerate as you go round a corner at a constant speed (velocity/direction/speed - look it up if your interested!).
So on the approach to any corner, you need to: -
1 Position yourself and the bike for the approaching bend, toward the right hand side of your lane for left hand bends and vice versa.
2 Adjust your speed to one you can quite happily ride around your bend (Slow down by easing off the throttle or appling the brakes)
3 Once at the right speed, (off the brakes) select the right gear for the speed your doing.
4 GENTLY apply some throttle to stop the bike slowing down anymore.
5 Tip the bike into the corner by gently pushing on the left bar for left handers or vice versa keeping the throttle still so that you hold your speed through the corner.
6 As the bend opens up (becomes a straight) gently apply more throttle as you release the pressure on the bar and stop turning.
If you want to keep improving your riding skills, sign up to a advanced riding course. They are for people who enjoy riding and want to be safer and consequently faster.
Good luck with your riding and enjoy!

Jul 28, 2011 | Suzuki GSX 1300 R Hayabusa Motorcycles

1 Answer

Cygnus x engine cuts out. as you come to a stop at traffic lights for example the engine idle speed slows down and eventually cuts out. The bike starts up again straight away but needs throttle to keep the...


Check for any splits on the rubber intake sleeve.this is what connects the carb to the bike.If this does not rectify the fault then strip down and clean the carb jets especially the idle jet as it may be slightly blocked causeing such symptoms.good luck

Jan 06, 2011 | 2006 Yamaha DT 125 X

2 Answers

Backfiring at high rev's


could be spark plug going bad could be leak in the exhaust, could be some water in the fuel.. could be fuel air mix not set properly, could be vales need adjusting.

May 30, 2009 | 2001 Suzuki AN 400 Burgman

Not finding what you are looking for?
2005 Hyosung GT 650 Logo

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...