Question about Suzuki DR 125 SE Motorcycles

1 Answer

I am doing up a suzuki gn125 for my son I have nearly finished but one problem still to over come. The indicators will not work new bulbs and cleaned contacts but stil not even a flicker.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 311 Answers

Hi this might help.it sounds like your indicator relay has failed,most of the *** bikes use a standard plug in variety which are generally located behind one of the side covers,check the fuse in the fuse box first and check it is ok or relpace with a new one,i normally replace the indicator relays with a transistorised type,they are far more reliable than the standard ones and only cost a few dollars more,hope this helps...cheers

Posted on Feb 06, 2010

Testimonial: "cheers get help turned out to be he relay thanks now working"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the valve clearance on Suzuki GN 125


Hi, Robbie for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://diversionclub.proboards.com/thread/15171/engine-suzuki-gn125-valve-clearances
Suzuki GS GZ 125 Sinnis Apache Valve Clearance and Cam Chain Tension
Suzuki gn 125 1987 2001 Service Repair Manual Download Download Manuals...
OEM parts for Suzuki
PDFmanual co on Twitter

Dec 03, 2016 | Suzuki Motorcycles

1 Answer

What are the torque settings for a suzuki gn125 1997 head bolts


http://prairiebearing.com/files/2713/9974/4875/Torque-Setting-Chart.jpg

You can use this chart based on grade and size to get an idea of the torque needed. Hope it helps!

Jul 09, 2015 | Suzuki Motorcycles

1 Answer

Suzuki gn125h fork oil capacity


Hi, Dayan for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "Free" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki GS 125 ESZ 82
GN Front Fork Oil
SUZUKI GN125 SHOP MANUAL 1993 2001 Download Manuals Technical $10
OEM parts for Suzuki
GN125H OWNERS MANUAL inSPANISH ENGLISH $8

Oct 17, 2013 | Suzuki Motorcycles

1 Answer

1994 suzuki gn125


is there water on the handlebar button, check wiring for corrosion

Feb 19, 2013 | Suzuki Motorcycles

1 Answer

Suzuki gn 125 runs but wont go


Hi, Paul and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Air/fuel mixture screw improperly adjusted.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Lean angle switch is faulty or needs adjustment.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki Intruder 125 Idle and Stalling Problems
Thread GN125 small running issues mildly puzzled and no mechanic will...
SUZUKI GN125 SHOP MANUAL 1993 2001 Download Manuals Technical $10
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

May 31, 2017 | Suzuki Motorcycles

1 Answer

MY SON HAS DERBI SENDA AND SOMEONE HAS MESS WIRING UP.I HAVE PUT NEW INDICATORS ON ,THEY GLOW BUT DONT BLINK AT ALL WONT PASS MOT...ANY IDEAS PLEASE AS ME AND SON ARE THE ORIGINAL CHUCKLE BROTHERS


The problem is that one of the bulbs has blown or you have a bad earth connection on one of the black wires coming from one of the indicators,clean connections with wet and dry sand paper. Finally check the wattage of the bulbs is correct something like 3-5 watts ,

Feb 12, 2010 | 2008 Derbi Cross city

1 Answer

Indicator not working suzuki 380 gt


Which indicator?
Look for a connector come loose, pinched/broken wire to the indicator bulb...after you replace the bulb.

Oct 11, 2009 | 1975 Suzuki GT 380

1 Answer

Will a lower fork leg{R/H} from an suzuki gn125


buddy no it wouldnt because the fork may fit but the spring rates and the oil capacity will change the riding conditions you can make it the same by getting the same springs and settng the same oil amount but will take a bit off work to do so i will just by the same one buddy hope this helped

Sep 13, 2009 | 1999 Suzuki SV 650 S

4 Answers

Suzuki GN125 engine oil drain


The spacer goes in first then the spring. What you removed was the detent for the shifter

Apr 11, 2009 | 2001 Suzuki AX 100

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...