Question about 1983 Suzuki GS 650 GT

Open Question

Will an GS850 engine fit into a GS650GT frame?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does an 1998 Suzuki RM 125 Engine fit into a 2000 Suzuki RM 125 frame ?


Hi, Anonymous after careful deliberation 4 out 5 Suzuki Gods give this one a thumbs down, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
will my 250 motor fit in newer 125 frame Suzuki 2 Stroke
RM125 250 frame
Dirt Rider Magazine
http://www.vitalmx.com/forums/Moto-Related,20/Suzuki-RM-250-Conversions,1247347

Jul 24, 2016 | Suzuki Motorcycles

1 Answer

What CDI box will fit Suzuki gs850


Hi, Dwwarrington I would check the parts fiche it will show exactly what will fit, for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/1982_GS850G_Owners_Manual.pdf
OEM parts for Suzuki
Suzuki GS850G 1980 1981 1982 1983 Workshop Service Manual Download Manuals...
Suzuki GS 850G

Jun 11, 2016 | Suzuki Motorcycles

1 Answer

Willa gs850 gearbox fit a gs750


You will have to be more specific about the bikes. Makes and exact models.

Feb 18, 2015 | Motorcycles

1 Answer

I want to change Cdi system to points type on my gs850.do I need to change ht coil


is that a Suzuki Gs 850 from the 1980s ? as far as i remember yes and mite have to change charge system too ! why you not just fit new cdi , wot country you in as you should find loads of new or sec/ hand if your in uk ?

Dec 07, 2013 | Motorcycles

1 Answer

Suzuki gs850 low battery voltage and won't start


Duplicate question. Keep in mind unless kept on a battery tender these batteries are good for one or two years max, no matter the brand.

Oct 11, 2012 | Motorcycles

1 Answer

Can I use gs750 camshafts on a gs850 engine


Although it is likely the gs850 is only a bored out 750 engine, it is not to say it will fit directly Carefull measurments must be made to length, bearing diamiter,width etc, also consider gearing, number of teeth this will affect number of turns per revelution of crankshaft, may be you can fit cam sprockets from one to another, dont forget to measure, cam lobe height, this will effect valve openings, to high and the valves may foul the pistons,to low and the running will be compramised, although the latter would be more desirable, all being said and done if all measures up the same there should be no prblem, pay particular attention to movment once the bearing caps have been tightened, as most cams and cylinder heads are a machined match, good luck, hope this helps, paul

Nov 20, 2011 | Suzuki Motorcycles

1 Answer

I have Suzuki gs 750 e, model 1979. The engine is an air-cooled, 4-cylinder,4-cycle model equipped withdual overhead camshafts. I am looking for new camshafts for the engine. Do gs 1000 and 1100...


The simple answer is no. It is possible to put a complete 1000 engine into the 750. but this will involve making brackets etc.
Proberbly the easiest way to more power is to fit the barrells and top end from the GS850. This will fit straight on. Ideally, you will need the 850's carb, but the 750s could be jetted to suit. The exhaust is the same fittings, so you could retain the gs750 exhaust as well. They also share the same airbox.

Nov 02, 2010 | 1979 Suzuki GS 750 E

2 Answers

What year engines will fit in my 1996 ZX6 frame?


1995-1997 after this the mountings were changed

May 08, 2009 | kawasaki ZZR 600 Motorcycles

1 Answer

Converting 996/998


ECU and harness for pretty much the same price. I'm curious to know if that engine will fit in the chassis. The different shape of the heads fitting in the frame under the airbox and the throttle bodies to airbox. From my understanding the engine mounting should be the same.It will not fit but not because of the enginemounting points, it´s because of the frame. You need a 748R or 998/996R frame to make the Testa engine fit. The problem is the cross-brace framing just behind the airbox. It´s going to be in the way. In the raceteam I´m apart off, we did a 999s engine transplant into our 748R frame and it was easy enough. We did in in a couple of days work, including using the new TB´s and building our own airbox that uses the 999 bottom part and a 748R upperpart. ,,,

Nov 10, 2008 | 2002 Ducati 998 R

Not finding what you are looking for?
1983 Suzuki GS 650 GT Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...