Question about 2002 Honda XR 200

1 Answer

I need a copy of wiring diagram of honda xr200.pls.because i have a bike that always having problem in the was always over charges.i check the charging coil and i measure it possible?what is the problem.pls.i need help.thanks.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 842 Answers

SOURCE: need a copy of wiring diagram of honda

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Honda XR200 pulse coil not working

Hi, Al-bar for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Honda XR200 Weak Intermittent spark
How to fix No Spark Problem on Motorcycles and Dirt Bikes
XR200R service manual repair 2000 2002 XR200 Download Manuals Technical $10

Apr 17, 2015 | Honda Motorcycles

1 Answer

Hi everyone... need some help on my honda xr200.... i just wana ask if the starter relay has something to do with the charging of the battery? what is the normal or ideal stator output in ohmz??

The stator has no output. The stator has to have continuity to all legs without short to ground. Best bet, check voltage at battery when not running. Check again when running. Voltage should be at least 1-1.5 volts higher when running. If not you should start at the battery and work your way to the alternator. If all wiring is tight and not frayed or broken, check each individual part in the charging system.

Apr 15, 2015 | Honda Motorcycles

1 Answer

1984 Honda XR200R no spark

Hi, Gary and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
XR200 No Spark
How to fix No Spark Problem on Motorcycles and Dirt Bikes
XR185 XR200 service manual repair 1979 1984 XR 185 200 Download Manuals... $10

Dec 19, 2013 | 2004 Honda XR 250 R

1 Answer

It is possible to run honda 2010 xr200 without stator ? only fully charge battery.

Not sure but prob not it runs thru stator to CID then sends the rite pulse to match the timing which is read by the magneto to send the juice at the rite time to the coil try to wire a hot wire to the batt from coil and see some older bikes will but I don't think it will work on an 2010

Aug 30, 2013 | Honda XR 200 Motorcycles

1 Answer

Bike isnt charging battery

If the battery charged before the "chop job/ignition bypass" and afterward does not, the you have left out a circuit that excites the alternator field. This was most likely part of the original ignition wiring, and you will need a Honda wiring diagram of you bike model and specific year in order to identify the wiring correctly. Otherwise, restore the original ignition wiring and switches, and see if the battery starts charging again. Then work backwards removing only the wiring that you know is not part of the charging system. Through the process of elimination you will discover which wire powers the alternator. It will take time and patience.

Mar 05, 2012 | 1981 Honda CX 500 B

1 Answer

1999 Honda xr200 need diagram for replacing piston rings

Not sure about your bike but mine i just have to remove the gas tank and radiators then the head and cylinder Slide off snugly

Mar 29, 2009 | 1999 Honda XR 250 R

Not finding what you are looking for?
2002 Honda XR 200 Logo

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

76846 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides