Question about 2001 Ducati ST4

1 Answer

I'm checking valve clearances on a 2001 st4 and need to know the valve clearance gaps. Do the clearances vary from the left to right hand side?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,100 Answers

Yes, you have 4 valves per side, 2 are intake, 2 exhaust. On the intake, the opener is .002-.007, and the closer .006-.010 , The exhaust, opener is, .002-.009 and the closer is ,.004- .008. If you are planning on doing this yourself, you need to do your math and get the right shims, Ducati will sell you the shims you need, but there are other people out there making them. When measuring the clearance, you need to turn the engine over by hand, pull the plugs, pull the cover off the left side to get to the crank bolt, get a friend to crank the engine over while you runs shims in and out of the rockers, keep notes on your measurements.

Posted on Feb 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the valve clearance of nissan caravan


Valve lash is the end of the rocker arm and the valve stem clearance between. When the engine is running, due to the thermal expansion and contraction, if there is no gap between the rocker arm and the valve stem, rocker arm swells, the top valve open, the impact of engine power and economy. Engine valve clearance will be different, usually when the car is cold, the intake valve 0.08-0.10MM, clearance exhaust valves 0.10-0.12MM Car Diagnostic Tool

Aug 26, 2016 | Nissan Cars & Trucks

1 Answer

Valve clearance


Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Checking and adjusting valves
Engine Valve Adjustment Procedure The Right Way
Valve Clearance Adjustment
Valve clearance Google Search

Aug 10, 2016 | Cars & Trucks

1 Answer

Valve clearance Briggs model# 331877 1371b1


Danny, I set lash at .004" / intake and exhaust clearance. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www4.briggsandstratton.com/miscpdfs/RNT/Engine%20Specifications%20Chart_ms3992.pdf
briggs and stratton 21HP backfires like cannon
YTS3000 Craftsman model 917 289213 valve gap setting 331877 1371 B1 Briggs...
Lawn Mower Repair Valve Adjustment

Jul 08, 2016 | Garden

1 Answer

How to wire trailer plug


hope this helps


6 pin socket

w1s.jpg

w1p.jpg

6 pin plug


7 pin socket

w2s.jpg

w2p.jpg

7 pin plug


5 pin socket

w3s.jpg

w3p.jpg

5 pin plug



7 pin socket

w4s.jpg

w4p.jpg

7 pin plug



7 pin socket

w5s.jpg

w5p.jpg

7 pin plug



7 pin socket

w6.jpg

7 pin plug





12 pin socket

w7.jpg

12 pin plug



small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white



small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

roundskt.jpg round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown



large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown



7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue



7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown


7_flatsocket.jpg flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet


Feb 02, 2013 | 2004 Toyota RAV4

1 Answer

Valve clearance of yamaha STX


Hi , unless your engine has a very specific numbers the "standart" valve clearance are:
inlet = 0,08 mm (8/100 of a milimiter)
exaust :0,10mm (1/10 of a milimiter)
With this gaps your engine will work smoothly and no risk of a burned valve
Goog luck

Sep 13, 2011 | 2001 Yamaha SR 125

1 Answer

I need to know how to go about the second procedure for valve clearance on my 1.5l mitsubishi lancer. ive started on TDC AND COMPLETED THE FIRST STEP BUT LEADING ON TO THE SECOND STEP IS TROUBLE?????? HELP


the easiest way is to start at the first valve,first you need to know if the inlet & exhaust valves have the same clearance, starting from the left side of the engine ( standing at the front ) the first valve exhaust, the next two are inlet, the next two are exhaust, the next two are inlet & the last one is exhaust, what you do is turn the engine over by hand ( this might be easier if you remove the spark plugs ) until the valve opens & closes, after it closes turn the engine a little more & adjust the clearance on that valve, repeat this action on every valve until they have all been adjusted.......hope this helps......cheers.

Sep 03, 2011 | Mitsubishi Lancer Cars & Trucks

1 Answer

Puch rod come off roker arm


Usually there is a reason why the rocker arm came off the push rod so you will need to check a few things before putting it back together. First make sure the push rod is not bent, if it is replace it, do not try to straighten it. Make sure the rocker arm stud did not loosen, if it did back out, re-tighten. If you're ready to put it back together, you will need to set the valve clearance between the rocker arm and the push rod. You will need to know the engine model number to get this clearance since it varies. Once you get the clearance values, make sure the piston is at TDC on a compression stroke and adjust the valves per the setting. In some rare instances, the valve can "stick" in the valve guide and this will cause excessive gap. However, usually when this occurs the engine will not start anyway. Hope this gets you in the right direction.

Feb 16, 2011 | Briggs & Stratton Power Products 5,550...

1 Answer

What is the clearance for rod bearings on the crank of a 98 ford f 150 4.6


General Specifications Item Specification
Displacement L (CID) 4.6 (281)
Number of Cylinders 8
Bore and Stroke mm 90.2 x 90.0
Firing Order 1-3-7-2-6-5-4-8
Oil Pressure (HOT @ 1500 rpm) kPa 138-310
Drive Belt Tension a
Cylinder Head and Valve Train
Combustion Chamber Volume cm 52?±.5
Valve Seats Width?€"Intake mm 1.9-2.1
Valve Seats Width?€"Exhaust mm 1.9-2.1
Valve Seats Angle 44.51-45.01 degrees
Valve Seats Runout (T.I.R.) Max mm 0.025
Valve Arrangement (Front-to-Rear) (Left Hand) E-I-E-I-E-I-E-I
(Right Hand)
I-E-I-E-I-E-I-E
Valve Stem to Guide Clearance?€"Intake mm (Inch) 0.020-0.069
(0.00078-0.00272)
Valve Stem to Guide Clearance?€"Exhaust mm (Inch) 0.045-0.095 (0.0018-0.0037)
Valve Head Diameter?€"Intake mm (Inch) 44.5- (1.75)
Valve Head Diameter?€"Exhaust mm (Inch) 34.0 (1.34)
Valve Head Diameter?€"Gauge Diameters mm (Inch) 42.5- and 32.0
(1.67 and 1.26)
Valve Face Runout Limit mm (Inch) 0.05 (0.002)
Valve Face Angle 45.25-45.75 degrees
Valve Stem Diameter (STD)
?€"Intake mm (Inch) 6.995-6.975 (0.275-0.2746)
Valve Stem Diameter (Std)
?€"Exhaust mm (Inch) 6.970-6.949 (0.274-0.2736)
Valve Springs?€"
Compression Pressure N @
Spec. Length?€"Intake 587.14 N @ 28.02 mm
Valve Springs?€"
Compression Pressure N @
Spec. Length?€"Exhaust 587.14 N @
28.02 mm
Valve Springs?€"Free
Length ( Approximate)?€"
Intake mm (Inch) 49.55 (1.951)
Valve Springs?€"Free
Length (Approximate)?€"
Exhaust mm (Inch) 49.55 (1.951)
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Intake 244.64 N @ 40.0 mm
Valve Spring?€"Installed
Pressure N @ Spec. Length
?€"Exhaust 244.64 N @ 40.0 mm
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Service Limit 10 % Pressure Less @ 28.02 mm
Valve Springs?€"Installed
Pressure N @ Spec. Length
?€"Out of Square Limit 2 degrees
Valve Guide Inner
Diameter mm (Inch) 7.015-7.044 (0.2761-0.2773)
Rocker Arm?€"Ratio 1.75:1
Valve Tappet?€"Diameter
(STD) mm (Inch) 16.000-15.988 (0.66-0.629)
Valve Tappet?€"Clearance
to Bore mm (Inch) 0.018-0.069
(0.00071-0.00272)
Valve Tappet?€"Service
Limit mm (Inch) 0.016 (0.00063)
Valve Tappet?€"Hydraulic
Leakdown Rate b 5-25 seconds
Valve Tappet?€"Collapsed
Valve Tappet Gap?€"
Desired mm (Inch) 0.085-0.45 (0.0033-0.0177)
Camshaft
Lobe Lift?€"Intake
mm (Inch) 6.58939 (0.2594)
Lobe Lift?€"Exhaust
mm (Inch) 6.58939 (0.2594)
Lobe Lift?€"Allowable
Lobe Lift Loss mm (Inch) 0 (0)
Theoretical Valve Lift @
Zero Lash?€"Intake
mm (Inch) 12.0 (0.472)
Theoretical Valve Lift @
Zero Lash?€"Exhaust
mm (Inch) 12.0 (0.472)
End Play mm (Inch) 0.025-0.165
(0.00098-0.0065)
Journal to Bearing
Clearance mm (Inch) 0.025-0.076
(0.00098-0.003
Journal to Bearing
Clearance?€"Service Limit
mm (Inch) 0.021 (0.0048)
Journal Diameter (All)
mm (Inch) 26.962-26.936
(1.061-1.060)
Journal Diameter (All)?€"
Bearing Inside Diameter
(All) mm (Inch) 27.012-26.987
(1.063-1.0625)
Camshaft Runout
mm (Inch) 0.05 (0.002)
Cylinder Bore
Diameter?€"Surface Finish
(RMS) 0.2-0.6 Microns
Diameter?€"Out-of-Round
Limit mm (Inch) 0.015 (0.0006)
Diameter?€"Out-of-Round
Service Limit mm (Inch) 0.020 (0.00079)
Diameter?€"Taper Service
Limit mm (Inch) 0.006 (0.00023)
Piston
Piston?€"Diameter?€"
Coded Red 1 mm (Inch) 90.177-90.197
(3.550-3.551)
Piston?€"Diameter?€"
Coded Blue 2 mm (Inch) 90.190-90.210
(3.5507-3.5515)
Piston?€"Diameter?€"
Coded Yellow 3 mm (Inch) 90.203-90.223
(3.513-3.5521)
Piston-to-Bore-Clearance
mm (Inch) -0.015 + 0.031 (0.0005-0.0012)
Pin Bore Diameter
mm (Inch) 22.0015-22.004
(0.866-0.8663)
Ring Groove Width?€"
Compression (Top)
mm (Inch) 1.520-1.550 (0.06-0.610)
Ring Groove Width?€"
Compression (Bottom)
mm (Inch) 1.520-1.530 (0.060-0.0602)
Ring Groove Width?€"Oil
Ring mm (Inch) 6.996-7.224 (0.275-0.2844)
Piston Pin?€"Length
mm (Inch) 61.93-62.05 (2.44-2.443)
Diameter mm (Inch) 21.994-21.999
(0.866-0.8661)
Pin to Piston Clearance
mm (Inch) 0.005-0.010
(0.0002-0.0004)
Pin to Rod Clearance
mm (Inch) 0.015-0.040
(0.0006-0.00157)
Piston Rings?€"Ring Gap
?€"Compression (Top)
mm (Inch) 1.0 MAX (0.0394)
Piston Rings?€"Ring Gap
?€"Compression (Top)
mm (Inch) 1.0 MAX (0.0394)
Oil Ring?€"Side Clearance
mm (Inch) 1.25 MAX (0.05)
Oil Ring?€"Compression
(Top) mm (Inch) 0.040-0.090
(0.0016-0.0031)
Oil Ring?€"Compression
(Top) mm (Inch) 0.030-0.080
(0.0012-0.00031)
Oil Ring Snug Fit
Oil Ring?€"Service Limit
mm (Inch) 0.015 MAX (0.0006)
Ring Gap?€"Compression
(Top) mm (Inch) 0.23-0.49
(0.01-0.02)
Ring Gap?€"Compression
(Bottom) mm (Inch) 0.23-0.49
(0.01-0.02)
Ring Gap?€"Oil Ring (Steel
Rail) mm (Inch) 0.05-0.66 (0.006-0.026)
Lubrication System
Oil Capacity?€"Automatic
Transmission (Quarts U.S.) 6.675?±0.125
Oil Capacity?€"Manual
Transmission (Quarts U.S.) 6.425?±0.125
Cylinder Block
Main Bearing Bore
Diameter mm (Inch) 72.401-72.422 (2.85-2.851)
Crankshaft and Flywheel
Main Bearing Journal
Diameter mm (Inch) 67.483-67-503 (2.65-2.657)
Connecting Rod Journal?€"
Diameter mm (Inch) 52.988-53.003
(2.0861-2.0867)
Crankshaft Free End Play
mm (Inch) 0.130-0.301 (0.0051-0.012)
Crankshaft Runout to Rear
Face of Block mm (Inch) 0.050 MAX (0.002)
Connecting Rod Bearings
Clearance to Crankshaft?€"
Desired mm (Inch) 0.027-0.069 (0.001-0.0027)
Clearance to Crankshaft?€"
Allowable mm (Inch) 0.027-0/069 (0.001-0.0027)
Bearing Wall Thickness
(STD) mm (Inch) 2.44-2.452 (0.096-0.0965)
Main Bearings
Clearance to Crankshaft?€"
Desired mm (Inch) 0027-0.065
(0.0011-0.0026)
Clearance to Crankshaft?€"
Allowable mm (Inch) 0.027-0.065
(0.0011-0.0026)
Bearing Wall Thickness
(STD) mm (Inch) 1.920-1.928 (0.075-0.076)
Connecting Rod, Piston and Rings
Connecting Rod?€"Piston
Pin Bore Diameter
mm (Inch) 21.959-21.979
(0.864-0.865)
Connecting Rod?€"
Crankshaft Bearing Bore
Diameter mm (Inch) 56.756-56.876 (2.234-2.24)
Connecting Rod?€"Length
(Center-to-Center)
mm (Inch) 150.7 (5.93)
Alignment (Bore-to-Bore
Max. Diff.) c ?€"Twist
mm (Inch) 0.050 per 25 (0.0015-0.984)
Alignment (Bore-to-Bore
Max. Diff.)?€"Bend
mm (Inch) 0.038 per 25 (0.0015-0.984)
Side Clearance (Assembled
to Crank)?€"Standard
mm (Inch) 0.015-0.45 (0.0006-0.0177)
Side Clearance (Assembled
to Crank)?€"Service Limit
mm (Inch) 0.05 MAX (0.02)
Crankshaft Main Bearing
Journal Taper mm (Inch) 0.020 (0.0007)
Crankshaft Main Bearing
Journal Runout mm (Inch) 0.05 (0.002)
Crankshaft Connecting Rod
Journal Taper mm (Inch) 0.015 (0.0006)

Feb 15, 2011 | 1998 Ford F150 Regular Cab

1 Answer

Hi,im looking for valve clearance specs for the kawaski 23hp fh680v-8s10 motor ??


The adjustment is .003 - .005. You must hold the rocker arm by lifting up on the valve depressing side and pressing down on the push-rod side while making the adjustment. Any other means of adjustment and it will be incorrect.

Below is quoted from the service manual without pictures
(FixYa Note TORQUE on lock screws is 61 inch pounds)

Valve Clearance Inspection
NOTE
?? Valve clearance must be checked when the engine is cold (at room
temperature).
• Remove the rocker cover (see Cylinder Head Removal).
• Place the piston at top dead center (TDC) of the compression stroke
turning the crankshaft clockwise facing the flywheel.
No.1 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #1 ignition coil [C] as shown.
?? Check the intake and exhaust valves are closed completely, if not turn
the flywheel one turn (360??) clockwise and face the left projection with
the right leg again.
No.2 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #2 ignition coil [C] as shown. Follow No.1 Cylinder alignment.
• Then check the valve clearance.
?? Using a thickness gauge [A], measure the valve clearance between
the rocker arm [B] and the valve stem end.
If the valve clearance is incorrect, adjust it.
Valve Clearance (when cold)
Intake, Exhaust 0.075 0.125 mm (0.003 0.005 in.)

Thanks for using FixYa.

Kelly

May 18, 2010 | Garden

1 Answer

What are the valve clearance specifications for the 2001 ZX-9?


Hi
Inlet valve clearance 0.15 - 0.24
Exhaust valve clearance 0.22 - 0.31
To be measured with engine cold, preferably left overnight

Ride Safe
Bike-Doc

May 13, 2010 | 2001 kawasaki ZX-9 R Ninja

Not finding what you are looking for?
2001 Ducati ST4 Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

bobkoure

Level 1 Expert

36 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...