Question about 2000 Suzuki GZ 125 Marauder

1 Answer

Had a recent rebuild on 2002 gz 125, new piston, rebore etc, bike has done 250 odd miles since and has recently started loosing power. Changed oil recently because of overfill (slightly) and now wont stay fired up. Anyone have any solutions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

First call the shop that did the work if they are worth anything they will help you out.
After i build a motor it always has a valve adj. after it has ran for a few i like to do it around 100 miles this lets everything find its groove if you will. Good luck
Mark
C.C. Motorsports

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pulsar 220 Bike emits little smoke even after Rebuild, how do I fix?


Did you clean the bore REALLY REALLY good with hot soapy water and a brush before assembly? Need to remove all the grit from the honing process. Test by rubbing hard with a white cloth.It MUST still be white after rubbing. If not then clean it again. It will wear out the rings quickly if it's not right. Solvent will not clean it properly.

Jun 24, 2015 | 2007 Bajaj Pulsar 180

1 Answer

Where to buy/order spare parts of kymco-spike 125?


I searchedkymco spike 125 and found a number of possible hits very easily. Go to wemotor. com/bikes/kymco/spike 125.. This looks like a possible one.

Jun 17, 2015 | Motorcycles

1 Answer

I have a 1999 yz 125. i just put new piston and rings in it an they say after a fresh rebuild you do whats called the break in period. an what i am asking is what do i do for the break in? how do you do...


hi, break in period is comonly known as running the bike in, if you have only replaced the piston and rings, and not had the cylinder rebored, then take it easy for a couple of tanks of fuel while the rings bed in, when the cylinder is rebored we run in the machine as the clearences between the piston and cylinder are much tighter, heat seizure can occure when the break in period is ignored. hope this helps , paul

Jan 18, 2011 | Yamaha YZ 125 Motorcycles

1 Answer

My Crf has recently started smoking an also harder than normal to start unless choked, only thing I've recently done is changed the spark plug but it still has plenty of power an actually seems snappyier ...


You are probably due for a top end rebuild. Your owners manual recommends a rebuild after several moto's or probably at least twice a year. Most riders can not afford that. I am guessing it may have been a couple of years since your last top end over haul (hone or bore,piston,rings,valve stem seals, gaskets,etc).

Oct 27, 2010 | 2005 Honda CRF 250 R

3 Answers

Honda cb100 motor sezied can i rebore and fit larger piston and ifso what. Thanks


in adition to the above coment, which i must say is spot on, the posability of a used barel and piston if a new piston is not available could be worth considering, other things you may wish to check on that particular engine is camshaft seizure, in a uk bike it runs directly in the machined surface of the cylinder head, oil failure due to blocked oil filter has severe consequenses, located on the l/h side of the engine under a 22 or 24mm spaner head cap just below the gear change lever, this is a washable filter retained by a cap and spring, correct replacment is inperitive. are you located in UK? HOPE THIS HELPS YOU

Aug 02, 2010 | 1976 Honda CB 100

1 Answer

My aprilia Sr 125 will not start it's bin sat for about year and my mates house. and my kick start is not turning when i kick it. Help. Any ideas. Everything else is fine the battery is carb is fuel pipe...


If the kick-start wont turn then it may well be seized, partially seized if you are lucky.
Spray some p.t.f.e. based lubricant down the spark plug hole, leave for 20 mins, then ease kick-start down.
If this has no effect then it will need a top-end rebuild ( this could mean just piston rings, but it may well need a new piston & rebore)

Ride safe
Bike-Doc
Please mark this as very helpful (if it has been!!)

May 05, 2010 | 2000 Aprilia RS 125

1 Answer

125 twin recent rebore 1000 miles ago one exhaust


Its a little hard to tell without seeing the exhaust color.Black is oil.brown is fuel.If the bad cyl. still has a good plug it may not be oil.Check the smoky exhaust carby.It may be you do not have complete firing on the bad cyl.MAYBE.Does the bike run well once you get the revs up under load?Check for inlet leaks that may change the fuel mixture on the suss. cyl.There is a few more things but start at these things 1st.After a complete rebuild,these problems do start.I hope this helps

Aug 23, 2009 | 1972 Honda CB 250

1 Answer

Tapping sound on top end of engine


sounds like a piston noise, you may have a scoured cylinder, this is common on two strokes.

Aug 13, 2009 | 1979 Yamaha RD 250

1 Answer

Just looking for general advice...on FMF Pipe Install


i changed my pipe on 07 dt125lc and did not rejet, seemed fine until i holed a piston. best to rejet me thinks, about £20 instead of £150 for piston rebore bearings and jets plus the time to re build.

Apr 25, 2009 | 2003 Yamaha YZ 125

1 Answer

Oil going somewhere but no leak that is visable


sounds like the old girl needs an overhaul.

Mar 28, 2009 | 2006 Yamaha Ybr 125

Not finding what you are looking for?
2000 Suzuki GZ 125 Marauder Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...