Question about 2003 Yamaha YZ 125

1 Answer

I have clutch problems

I put it in gear and let out the clutch and it dies, What do i do

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 496 Answers

Dose the bike want to jump every time? if so check the slack in your clutch cable if you don't have it set right it won't let the clutch open all the way and then you put it in gear and more or less stop the motor with the back tire that is not turning. check that, it is something simply hope it helps
Mark
C.C. Motorsports

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 XV 1600 Road Star Silverado lurches forward and dies when put into gear


Hi, Tom and the usual suspects are:
1. Clutch not properly adjusted.
2. Clutch plates rusted together.
3. Hydraulic clutch needs bleeding.
4. Faulty clutch slave cylinder.
5. Faulty clutch ramp mechanism.
6. Broken clutch rod
7. Clutch pack loose on the main shaft.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Re dies when put in gear Road Star Forum Yamaha Road Star
runs at idle but dies when in gear
Yamaha XV16AL Service Manual
OEM parts for Yamaha
YAMAHA XV1600A Owner Manual

Aug 11, 2017 | 2001 Yamaha XV 1600 Wild Star

1 Answer

Starts in neutral w/ kickstand up, dies when put in gear. NOT Kickstand Switch


it sounds like the clutch is dragging,either it is not adjusted properly or the clutch friction or metal plates are warped and acting like wave washers.you should have about 2mm of free play at the end of the clutch lever when its not being pulled in.also too thick an oil in the engine in it like 20/50 it should be using 10w 40 semi synthetic oil.does it try to pull forwards with the clutch in slightly when you put it in gear ?

Jul 28, 2015 | 2001 Suzuki GZ 250 Marauder

2 Answers

1995 Suzuki VS 800 Intruder dies when put into gear


Just about to suggest kick stand switch. Happened on my Buell.

Oct 30, 2017 | 1995 Suzuki VS 800 Intruder

1 Answer

2006 Honda Rebel dies when put in gear


Hi, Scott and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Engine dies when put into Gear
Honda Rebel 125 250 450 View topic dies when put in gear
Honda rebel 250 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Jun 30, 2012 | 2006 Honda Rebel

4 Answers

What's your problem?1995 yamaha virago 1100 that sometimes you you put into gear and immediately dies


The Clutch on some bikes will disengage the starter motor. Yamaha will not allow you to engage gear when the side stand is down. Hope this gives you some idea

Nov 27, 2011 | Yamaha Motorcycles

1 Answer

When engine is warm it dies when you stop restarts and when put in gear it dies


Got a service engine soon light illuminated on the instrument panel? If so, look for codes related to the torque converter clutch. Sounds like a bad TCC Solenoid or problem within that circuit. If the torque converter clutch does not release in lower gear ranges then it's just like letting the clutch pedal out on a manual transmission - there is a direct lock-up between the transmission and engine and thus the engine dies.

May 24, 2010 | 1995 Chevrolet Lumina Apv

1 Answer

'06 vtx 1300 c : engine dies when put into gear


You have one of two things going on. (1) You need to check the kick stand switch, your bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is in gear. (2) Next problem could be, you need to loosen up the clutch cable a little bit, The clutch control on the handle bar has a screw type of adjuster (clutch cable passes through it ), try loosening it till it's easy for you to move the bike without the engine shutting off. Hope it helps and comment if you need more clarification.

May 08, 2010 | 2006 Honda VTX 1300 S

1 Answer

My Mustang Dies when i Put it in gear and let out on the clutch?


check fuel pressure -fuel filter/fuel pump--also check for vacuum leak or hose disconnected

Apr 19, 2010 | 1995 Ford Mustang

2 Answers

Engine dies when shift into gear.


This sounds like the kick stand switch is bad or not making full contact.


Please take time to rate this a fixya

May 11, 2009 | 1999 Honda GL 1500 SE Gold Wing

1 Answer

When I put it in gear it dies even with the clutch engaged


Check out your kickstand switch. kickstand must be up to move in gear.....safety

Feb 03, 2009 | 2006 Suzuki GSX-R 750

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...