Question about 2008 Suzuki GSX-R 600

2 Answers

I start my bike runs fine for a while then as it gets warmed up the warning light comes on and it throws a ''5d'' or ''sd'' code and the battery is a 2009 suzuki gsxr 600.... im lost

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Take it bake to the the dealership i just bought a new 09 gsxr 750 and there is a recal on the bikes charging system.

Posted on Oct 24, 2010

  • MarkyboyGSXR Sep 09, 2011

    My bike did this and it turned out it was a recall its the regulator rectifier! Mine is a GSXR 600 K8 and it was due a recall. When I started the bike it was fine, then the SD (Steering Dampner) light comes on and the bike then has no battery when you try to clear the light. It is the regulator Rectifier fella.


  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Check to make sure the battery in grounded to the bike correctlly (The negative/ black cable) also make sure there is no corrosion on the termanals

Posted on Feb 19, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bike cuts out at running temperature

You actually may have two problems. First, if you have a spark from a coil, find out why. May be a bad or loose connection. when coils get hot their resistance increases. A leak or bad connection will show up quicker when hot. If the spark comes from the body of the coil, replace it.
Second, your starter may be breaking down when hot. Check the brushes and coils in the starter motor. The same discussion about loose connections also will apply to the starter.
good luck

Apr 08, 2014 | Honda Varadero 125 Motorcycles

1 Answer

Check engine light comes on until engine warms up

One of the sensors isn't working properly. The check engine lite comes on because the bike is throwing a trouble code. Your owner's manual should tell you how to check engine codes using the odometer read out. Otherwise you will either have to purchase the HD code reader or have your dealer hook the bike up to Digital Technician to read the code.

Mar 10, 2014 | 2000 Harley Davidson FLTR-FLTRI Road Glide

1 Answer

Brake failure light stays on steady, but only intermittently, usually after engine has warmed up. solutions?

Hi, R_enos54 for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Brake wear indicator question
Brake Failure Warning Indication BMW com
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW

Apr 06, 2012 | 2007 BMW K 1200 GT

1 Answer

Hi my cagiva mito doesnt wont to turn on or start no light are appearing oil nutral petrol when i turn the key on and i have checked all the wires and no loss connection just brought new baterey and fuses...

Hi, Poingy21 and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
Cagiva Mito Starting problem
Cagiva MITO EURO2 125 2004 parts OEM Motorparts

Aug 14, 2011 | Cagiva Mito 125 Motorcycles

1 Answer

I have a cagiva mito 125 evolution 1999 it will only run with the choke on all the time. I have cleaned the carb and jets and drained the tank and added fresh fuel but it still does the same, and when you...

Hi, Wayne4000uk and the usual suspects are:
1. Idle speed improperly adjusted.
2. Inlet system air leak.
3. Leaking accelerator pump.
4. Loose low-speed jet.
5. Plugged low-speed jet.
6. Contaminated or plugged low-speed circuit.
7. Enrichner valve is not seated or leaking.
For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have nice a day.
Thread bike only runs with choke
Cagiva Mito 125 1991 running issue help
Free Cagiva Motorcycle Service Manuals for download

Apr 11, 2011 | Cagiva Mito 125 Evoluzione Motorcycles

1 Answer

What does F- indicate?

The SD code, is a sudsing code. If you are using the appropriate amount of soap and HE soap, it could be a communication error with the sensor and the CCU (the main control board). If you take off the panel on the bottom of the front (3 screws on the bottom hold it on). Once you get in, there is a plastic pouch on the right hand side there is a tech sheet that will have a list of all the error codes, and what to check.

Good luck

Dec 23, 2008 | Kenmore 43142 Front Load Washer

1 Answer

1 have a warning light that comes on after 10 mins and remains on a auto electrian says it is linked to the alterenator but the battery does not go flat i dont want to buy a new 1 in case that does not...

Re bryanvs' battery light flickering. This sounds like a slipping fan belt. Check your belt tension. A hard push with your thumb should bend the longest throw of the belt in by half an inch. Any more, and you may need to tighten the belt. Hope this helps.

Re rabturner's problem - battery warning light comes on after 10 minutes; This does sound like your alternator electronics becoming disabled as they warm up. Your electrician should be able to tell you whether your alternator is charging or not - take your car in after a good run, when the light is "on". If alternator is faulty, you can get a reconditioned one cheaper than a new one. All the best, OzKluger

Jul 14, 2008 | 1990 Volkswagen GTI

Not finding what you are looking for?
2008 Suzuki GSX-R 600 Logo

759 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4533 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides