Question about 2002 Husqvarna WR 250

2 Answers

The rear brake disk is loose but all the bolts are

The rear brake disk on my Husky 2002 WR 250 is loose but all the bolts holding it are tight? Anyone's help would be greatly appreciated.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey mate, same deal with mine but there supose to be like that huskys have a floating rear disk.

Posted on Mar 26, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 425 Answers

Go to this site and get a freebie manual. It sounds as if it was re-assembled without the spring washers that hold it tight. But the manual will give you a better description of how it is suppose to be, so go from there:

http://www.carlsalter.com/motorcycle-manuals.asp

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 husky 360 100 year anaverary model and someone has welded a automatic decompression in the head now it keep blowing a hole in the piston.WHY


Hi, Brad I'm not sure why someone would weld a decompression unit in the head unless the threads were bad and it was leaking, if it's faulty it could be sucking air and create a hot spot (you may want to do a compression check) or the heat range on your spark plug is too hot/high or you have a pre-ignition issue.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
CR125 Keeps Eating Pistons
http://www.cafehusky.com/threads/shattered-piston-on-my-11-wr300.83126
Husqvarna workshop service manual 2000 WR 250 WR 360 amp CR 250 eBay $25
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna WR 250 2002 Owner Manual

Apr 04, 2017 | 2001 Husqvarna WR 360

1 Answer

Kick start husqvarna wr 360 2000 mdl snapped off completely can i use ktm kickstart for this ??


Hi, Dan for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2000 Husqvarna CR 250 WR 250 360 Workshop Service Repair Manual DOWNLOAD...
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna WR 250 2002 Owner Manual

Dec 26, 2016 | 2000 Husqvarna WR 360

1 Answer

Can hear grinding noise from front and rear brakes. very loud noise when back up from rear brake.


it could be a knackered wheel bearing, or the pads are worn, or theyre rubbing, check all pins/clips and bolts are on correctly nothings too loose or tight (depending on what it is)

Jul 19, 2011 | 2000 Suzuki GZ 250 Marauder

1 Answer

What is the torque for the head bols for a 2002 ktm 250 exc


Thanks for contacting FixYa. I was reviewing some of the older un-answered questions trying to ensure your issue has been resolved.

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber botton bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nutes on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs

TF

Nov 07, 2010 | KTM EXC 300 Motorcycles

1 Answer

HUSQVARNA WR 250 2000


Try www.carlsalter.com/motorcycle-manuals.asp Below is their list for Husky. Some a re owners manuals and some are service manuals. The year doesn't have to match in most cases. The service procedures seldom change year to year. Please rate my answer. Thanks.

ba9a6ea.gif

Dec 22, 2009 | 2000 Husqvarna WR 250

1 Answer

I need engine torque settings on my 2008 ktm sxf 250 motorcross bike


Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

Try these:

KTM Torque settings


  1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
  2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
  3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
  4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
  5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
  6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
  7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
  8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
  9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
  10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
  11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
  12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
  13. Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
  14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
  15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
  16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
  17. Engine brace Engine brace 33Nm 24ft lbs
  18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
  19. Spoke nipple Spokes 5Nm 4ft lbs
  20. Other Screws on chassis M6 10Nm 7ft lbs
  21. M8 25Nm 19ft lbs
  22. M10 45Nm 33ft lbs
  23. Other collar nuts on chassis M6 15Nm 11ft lbs
  24. M8 30Nm 22ft lbs
  25. M10 50Nm 37ft lbs
  26. Front Sprocket 44ft lbs
TF

Oct 29, 2009 | 2008 KTM 250 SX-F

1 Answer

Ive just bought a wr 250 but im not sure wot yr i think it could be a 88 model could any 1 help me find out wot yr it is where a good husky wreckers r ?


Find the frame number then call a dealer. They can tell you what year and model bike you have from the number.
Could you take a moment and rate my answer? Thanks!

Sep 29, 2009 | 2002 Husqvarna WR 250

1 Answer

Rear brake cylinder and bleeding


Relax....KTM's are delicate in this procedure.
First of all make sure that you are using DOT 5.1 brake fluid and not 4 as we use in the Japan models.
Then take the rear caliper in your hands and push the piston all the way in.Then bolt it on its position.
Bolt on the brake hose to the rear caliper tight and leave it loose on the rear master cylinder side (loose but ready to tight it on like half circle loose) and clean up the reservoir completely.
Take a syringe from a pharmacy and a piece of 3mm clear tube.
Start pushing brake fluid in the caliper's loose bleeder until you see fluid coming out fron the hose's loose end on the master cylinder.
The tight the cylinder's bolt and keep pushing fluid until you see it filling up the reservoir.
When you see the reservoir fully filled up, tight the bleeder, take out the syringe and start pressing the brake pedal 15-20 times and the last one keep it down and loose the bleeder (with a tube attached to it and to a bottle) for a sec to relieve the pressure along with any air bubbles.DON'T LIFT THE PEDAL UNTIL YOU HAVE TIGHT BACK THE BLEEDER or the system will **** air in.FIRST tight the bleeder and THEN loose the pedal.
Keep doing that until NO air comes out of the system.
While you are doing this second stage keep filling up the reservoir and do not let the master cylinder **** air in.

Jun 15, 2009 | 2002 KTM LC8 950 Rally

1 Answer

Brakes


First bleed the MC, Remove the brake hose - block the outlet of the MC with your finger - pump the lever and crack you finger loose for an instant to bleed the air out - repeat til only fluid comes out. Quickly install the brake hose. Bleed the brakes by cracking loose the brake hose bolt. Bleed at the caliper bolt. Bleed as normal with the bleeder valve.

Nov 10, 2008 | 2002 Yamaha WR 426 F

2 Answers

Maintenance


OFF-ROAD VEHICLES - Initial Service: Check carburetor adjustment, engine idling speed and starter operation/adjust if necessary, Change engine oil/filter, Check clutch operation, Check wheel runout, spoke tightness and for damage, Check swingarm pivoting point for play, correct if necessary, Check steering bearings for play and steering for roughness, Check sidestand Torque all nuts, bolts and screws to spec, Clean or replace air filter, Check tires for damage, Check front and rear brake operation, fluid levels and for leakage, Check wear levels on brake pads, Check and adjust chain/sprockets, Road Test Motorcycle. EVERY 60 HOURS: Check fuel hoses for cracks or damage, Check spark plug condition. Clean, gap or replace if necessary, Check exhaust system for leakage, Check wheel bearings for looseness or damage, Check fork and shock for leakage or damage and smooth operation, Check battery terminals for looseness and corrosion. EVERY 120 HOURS: Check valve clearances, Clean spark arrester, Repack swingarm bearings, Replace fork oil, Replace brake fluid

Nov 10, 2008 | 2005 Yamaha WR 250 F

Not finding what you are looking for?
2002 Husqvarna WR 250 Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4534 Answers

choprboz5

Level 2 Expert

196 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...