Question about 2007 Suzuki GSX-R 750

1 Answer

07 gsxr 750 backseat won't unlock

I have a 07 gsxr 750 and the lock on the back of the bike that removes the seat and adds the plastic cover will not unlatch so i can remove the seat. I turn the key and i hear the lock turning but nothing is unlatching. what can i do to fix this and take the seat off? please contact me at if you have any ideas. thanks!

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

When this happened with my bike, I took a large gem clip, straightened it out, and then put a 90 degree bend about 1/4" from one end. I could insert the end with the bend under the seat and use it to grab the release mechanism and pull it so the rear seat released. Then I was able to connect the cable from the latch/lock correctly to avoid the same prob when the seat was reattached.

Posted on Apr 03, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2005 Suzuki GSF 750 seat removal

Hi, Gary for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2005 Suzuki GSF 750 seat removal Google Search
06 07 GSXR Seat Removal
OEM parts for Suzuki

Jan 07, 2017 | Suzuki GSF 600 S Bandit Motorcycles

1 Answer

My 2000 Suzuki 600 gsxr clutch issues

Replace all the clutch plates and the springs, or get a racing clutch. And stop slipping the clutch to do wheelies :>)



  • 2000 Suzuki GSX-R600 Clutch - Motorcycle Superstore Clutch 2000 Suzuki GSX-R600 ... 2000 Suzuki GSX-R600 Clutch. ... it was easy to install and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • 2000 Suzuki Katana 600 Clutch Springs - Motorcycle Superstore Clutch 2000 Suzuki Katana 600 ... KG Clutch Factory High Performance Spring SetFor ... and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • GSXR 750 Suzuki Sport Motorcycle Clutch Parts ... Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000-2005/High Performance/Heavy Duty. Price: $35.95 (USD) GB Racing - Clutch Cover Suzuki ...
  • GSXR 600 Suzuki Sport Motorcycle Clutch Parts ... Clutch Springs Suzuki - GSXR 600 ... Orient Express - Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000 ... GB Racing - Clutch Cover Suzuki - GSXR 600 ...
  • 2000 Suzuki GSX-R600 Street Bike Clutch Springs ... Clutch 2000 Suzuki GSX-R600 Street Bike Parts ... Race Suits; Riding Suits; Riding Underwear; Socks; ... Clutch; Cooling System; Drive; Electrical; Engine;
  • Suzuki GSXR600 Clutch Plates and Parts - Schnitz Racing Shop Schnitz Racing for Suzuki GSXR600 clutch plates, ... Valves & Springs; Exhaust. ... Suzuki GSXR600 Clutch Components and Parts from Schnitz Racing.
  • Suzuki GSXR 600 1997-2000 EBC SRK Complete Clutch Kit Suzuki GSXR 600 1997-2000 EBC SRK Complete ... heavy duty clutch springs of either ... Suzuki GSXR 600 2006-2007 EBC SRK Complete Clutch Kit Suzuki GSXR 600 ...
  • Sigma Clutches for Suzuki - Sigma Clutches for Suzuki. Sigma Suzuki GSXR600 & GSXR750 K6-K8 2006-2008 Performance Slipper Clutch . Ref: ... - Requires GSX-R1000 clutch springs (not ...

    Suzuki GSXR600 Clutch Plates and Parts Schnitz Racing
  • Jun 12, 2016 | 2000 Suzuki GSX-R 600

    1 Answer

    How do I go about fixing a reving issue on my bike? It doesnt like to rev past about 10,000 rpms. I was thinking maybe the carbs need to be rejetted. The bike will rev to redline in neutral.

    Hi, Ani and the usual suspects are:
    1. Severely drained or faulty battery.
    2. Faulty regulator/rectifier or high output coil.
    3. Faulty power valve, solenoid or installation.
    4. Clogged air filter or exhaust.
    5. Cracked or incorrect float level.
    6. Float needle is not seating.
    7. Faulty reed valve.
    For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
    02 GSXR 750 won rev past 8k
    2002 750 wont rev past 8000
    Wont rev past 10000 RPM

    May 21, 2016 | Power Motorcycles

    1 Answer


    If you have repositioned the shifter arm correctly and it is not contacting something it is possible that you do not have the cover on correctly. There are, I believe, 2 dowel pins in back of the cover where it contacts t the crankcase if these dowel pins were not seated properly when you tightened the cover bolts it would cause the cover to misalign where the shaft goes through it and bind the shaft from rotating. Re check the cover installation.

    Jan 16, 2013 | Motorcycles

    2 Answers

    My 2001 suzuki gsxr 750 won't downshift all of a

    Your shifter cam bolt has backed out, this is a common problem on earlier GSXR's. Happened twice on my 2000, both times during race weekends.

    Stop riding the bike and shifting at all and do the following repair:

    Remove clutch cover - you'll drain some oil so make sure you have a drip pan underneath

    Remove the 5 the clutch housing plate bolts - careful as they have pretty stiff springs behind them providing torsion

    Remove all the clutch plates - make sure you keep the same order and re-install the same way; matter of fact if you have never replaced your clutch plates, do it along with this repair.

    Once the clutch case is basically empty, you will see at the lower left a small assembly that looks a bit like a tuning fork, at the end of the shifter shaft. There is also a cam there with rounded cogs. There is a 8mm or 10 mm hex head bolt that holds this cam, and I'm sure it has backed out and is causing the cam and shifter to not engage the gears properly.

    Remove the cam bolt. Spray some compressed air or even a light spray of brake cleaner in the threaded area where the bolt you just removed is. Make sure the threads are clean and dry.

    Place the cam bolt and assembly back in its position, and take some RED loctite to the shifter cam bolt threads. Make sure to torque the bolt to specifications, I think it's 24 or 28 nm.

    Let the bolt set for 24-8 hours, then reassemble the clutch and replace the clutch cover gasket. Top off the oil and go riding.

    Jun 18, 2011 | 2001 Suzuki GSX-R 750

    1 Answer

    How do you remove the seat from a 1985 Yamaha Maxim XJ700S

    I have a maxim x 750. If it's similar, then look for a seat lock on the right side (facing forwards). I thought it was the helmet lock but that is on the left side of the bike. Once you unlock the seat lock the seat pops right off.

    Apr 22, 2011 | 1985 Yamaha XJ 700 S Maxim

    1 Answer

    My 98 srad has a single seat cowel,how do iremove to fit seat,removed both side retaining bolts but still won`t com e off

    Use the ignition key for the lock under where the back seat goes, right above the chain. turn the key in the lock and pull up on the cowl, it will come right off, then you can pop the rear pillion "backseat" into it's place

    Aug 16, 2010 | 1998 Suzuki GSX-R 600

    1 Answer

    My suzuki gsxr 750 sat all winter and i didnt winterize it at all. the battery died... i charged it and my bike just wont start. It cranks over just won.t start. What should i do?

    check spark plugs,check for spark. check fuel is good. possible needle and seat gummed up in carb float bowl. disasemble and clean with brake or carb not change float level. re assemble ,you can use the cleaner to help to fire the motor with a shot through the carb. make sure you cleaner says flammable. good luck.

    Mar 22, 2010 | 2007 Suzuki GSX-R 750

    1 Answer

    Where is the battery located on a 750 honda shadow spirit?

    The Battery is located under the seat you must take out the 2 bolts holding the seat ******** and then slide the seat back to remove then it is under the ignition module and a plastic cover. By the way when you try to remove the battery you will need to gently pry the back of the battery box open to get the battery past the little locking lip. hope this helps.

    Mar 07, 2010 | 2005 Honda VT 750 DC Shadow Spirit

    1 Answer

    How to remove backseat backrest to change seat cover from 05 f150

    u have to start by taking the bottoms out. then the back there should be two bolt to take out and it slides up and pulls off

    Jun 15, 2009 | 2005 Ford F-150

    Not finding what you are looking for?
    2007 Suzuki GSX-R 750 Logo

    426 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts


    Level 3 Expert

    76846 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4536 Answers


    Level 2 Expert

    83 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides