Question about 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

How to set timing on vulcan 1500\r\nclassic 1999

How to set timing on vulcan 1500 classic 1999

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 341 Answers

All I can give you is the specs- 5degrees BTDC ( F mark) at 800 RPM and 25 degrees BTDC (in double marks) at 3500 RPM

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel is leaking into my oil pan


Perform a compression test. Your looking for a bad ring.

Sep 23, 2013 | Front Splined Floorboard/Footpeg Adapters...

1 Answer

1997 kawaski vn 1500 Vulcan classic d raw fuel down needle value of carb


sounds like carb, is airfilter set up ok, it can act as an air restrictor to match the jetting

Feb 16, 2013 | 1999 kawasaki VN 1500 Vulcan Classic

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

I have a 95 Kawasaki Vulcan 1500 88 SE and I put new valves in as well as rings. I came upon an issue and wanted to ask about it. When lining up the timing mark on the alternator/crank pulley, I know that...


Hi, Corey_stackh the "TF" is the one you use once set it will automatically set the rear cylinder timing the "R" is there for convenience for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual
Kawasaki VN 1500 Classic 1996
Kawasaki Vulcan

May 31, 2017 | 1996 kawasaki VN 1500 Vulcan Classic

2 Answers

99 kawasaki vulcan 1500 classic will not idle


if u can tuen the throttle and it still run ..its ur idle,u need to adjust ur idle adjustment screw ur manual can help u find this

Oct 17, 2009 | 1999 kawasaki VN 1500 Vulcan Classic

1 Answer

2001 Vulcan 1500 Classic - Started to back fire when you let off the throttle. Has never done this prior.


dear vulcan owner i had the same problem on my 96 vulcan classic found out that the carb is set to lean from the factory solved the problem by rejetting the carb. i also installed a set of aftermarket pipes made a world of diff to the power out put

Mar 30, 2009 | 2001 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
1996 kawasaki VN 1500 Vulcan Classic Logo

Related Topics:

881 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...