Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Whirlpool dishwasher ADG 957

I started my dishwasher but we had to cut off the water yesterday (due to another problem). We forgot to stop the dishwasher before we cut off the water so when we restarted the cycle again it wouldnt work. It just keeps beeping and light keeps flashing. Any solutions?

Anonymous Mar 30, 2014

my dishwasher wont start it keeps beeping and lights keep flasing

2 Answers

Anonymous

Master 4,889 Answers
Posted on Feb 11, 2008

Anonymous

Master

Joined: Oct 06, 2007

Answers

4889

Questions

Helped

1512720

Points

14106

When it sits there bleeping, have a look at the light by the start button, it will be flashing. Count the flashes between pauses and post the result here.
If it appears to be continuous then thats a single flash.

Anonymous Feb 11, 2008

Continuous flash with no pause is a Faulty NTC (temperature sensor)

Anonymous

Expert 86 Answers
Posted on Feb 11, 2008

Anonymous

Expert

Joined: Jan 19, 2008

Answers

Questions

Helped

86115

Points

237

Try opening the door and holding the start button for 5 seconds to perform a reset. Then try to restart it.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Whirlpool ADG 7560/2 11 flashes?

Read full answer

Nov 17, 2022 • Whirlpool Dishwashers

0helpful

1answer

Why Whirlpool ADG-6558/1 IX stops sometimes the wash cycle after 15/30 min?

reset the panel by hitting normal-- heat dry NOT at the same time until all lights flash then push cancel and it should start. element is going bad

Read full answer

Jun 02, 2014 • Whirlpool Dishwashers

1helpful

2answers

I have a Whirlpool Dishwasher model no. ADG 6340 IX.The inlet valve is pulsing and letting in water on every pulse. It just keeps filling, over fills and trips elcb

Hello there and thank you for choosing fixya
This is a very common problem with these types of machines the water inlet valve has a solinoid for the hot and a solinoid for the cold that opens and closes the water on demand .
When they start to pulsate like this it is trying to close the valve but it cant this is normally due to the valve being clogged with debris or the valve is failing all together and simply needs to be replaced
So what i would do is first if you can look into the inlet valve with a flashlight and see ifit looks like it has stuff in it and if so clean it out and try it again if this doesnt work than you can assum that the valve will need to be replaced here is what the one of the valves should look like or close to it .
$50.60 Quantity:

In Stock

Read full answer

Jun 05, 2011 • Whirlpool 24 in. ADG6340iX Built-in...

6helpful

1answer

Whirlpool ADG 6556 flashing code

Refer user guide for the correct meaning!

Meanwhile Check all the dispensing compartments- salt - rinse-aid, free inlet water flow and the door close.

Read full answer

May 20, 2010 • Whirlpool 24 in. ADG6552 Built-in...

0helpful

1answer

Whirlpool dishwasher stuck on prewash cycle

the eprom memory is brocken,the main board must be changed.

Read full answer

Feb 14, 2010 • Whirlpool 24 in. ADG7952 Built-in...

0helpful

1answer

Whirlpool ADG 957 Dishwasher not draining water?

There is a remote possibility that the drain line is clogged. Most units should have an aerator on the top of the sink area HOWEVER some are hooked up directly into the garbage disposal and it's at that point where the line can be clogged. Remove the clamp and make sure the line is clear or the hole in the disposal is clear.

Read full answer

Nov 09, 2017 • Dishwashers

1helpful

1answer