HOW CAN I GET THE HD PICTURE CLEARER?

Hi , I presume you are worried with picture quality from your Decoder (STB) to flat screen TV :
(1) clear picture , use AV cables (they have 3 pins of colour Yellow Red and White ) .
(2) for clearer picture (HD) , use an HD cable , adjust your TV input accordingly .
(3) If facing a different problem , may you specify it (be vivid in your explanation of your challenge ).

then ur picture alone is getting affected,... this can be due to your hotizontal or vertical ICs that is the problem

RCA three wire [AV], will give you the good picture, rather than a converter output.

It looks like a light shining on the screen when you were recording the problem.Also, you are taking the picture from a bad angle for lcd types of tvs.Try a new recording,also get the tv on an HD channel for a better,clearer picture.Many hd tvs look bad on non HD channels.

make sure you are viewing from true hd signal. some cables and outputs from older devices may not look as good.

Well, there is a way to have the clearest possable picture. Get HD cable TV box that is HDMI compatable and watch only HD channels. Or buy a blu-ray player, hook it up via HDMI and only watch blu-ray disc in 1080p!

Dear LADY DAWN,

In order to get true high definition quality, you would want a high definition source. There really is not much else you can add to make your picture clearer, provided you have it hooked up with the best type of cables possible.

Sincerely,

Dorothy
Go Ahead. Use Us.

Are you using the original remote control...Reg TV doesn't fit your screen because it's not filmed in HD...But it should be clear but you have to watch it smaller... Usually big screen tv's will have a black trim around the picture...And zoom cuts off some of the picture..Some tv's have wide, cinema and other options...Your TV might just have zoom

if you are on a cable or a satelite box try setting the boxes output to 720p instead of 1080i..it should be clearer