Question about 2005 Gilera Runner VX 125

1 Answer

2008 gilera vx 125, changed the spark plug and

I was not able to start my bike to the point it killed my battery, so I changed the battery to relise that I was not getting a spark, so I replaced the spark plug alongside the coil but still not starting, please help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 45 Answers

First thing to check is all the wiring for any damage or incase something has just come unplugged before getting the cdi unit checked and is the ignition switch in good condition??

Posted on Dec 17, 2009

Testimonial: "I had replaced the CDI with a Malossi one from PM TUNING for £133 very good price as i was being qouted anything from £180 to £350, started first time"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi there my Gilera vx kicks over but doesn't start will start 1st time on a jump pack


Hi, George start with #7 and perform a proper load test otherwise the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Gilera Runner 125 wont start
Starting Gilera runner vx 125
gilera dna 125 not starting
http://www.carlsalter.com/download.asp?p=1067

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 01, 2016 | Gilera Motorcycles

1 Answer

2005 Gilera Runner VX 125 will not start


Hi, Gary and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch, kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Scooter Troubleshooting Scooter won start All about Scooters
gilera dan 125 wont start Any suggestions
Gilera Runner 50 1997 Service And Repair Manual
Gilera RUNNER VX 4T 125 2005 Parts
http://absolutelyscooterparts.net/pdf/CGEN_dawg_scooter_manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 24, 2015 | 2005 Gilera Runner VX 125

1 Answer

Gilera runner wont start


check your starter switch b/c most likely there is a shoft in the wire to the button...you should be able to change that and possibly the kill switch and it be good to vo if nit look at you ignition switch wjringas well

Jun 23, 2014 | 2005 Gilera Runner VX 125

1 Answer

I have gilera DNA 125, my bike loses power when first start it up ? Throttle takes time to react


check the timing, spark plug.spark must be brownishin color if its not, adjust your air fuel mixture. try removing the air filter if it will work. if not, check if your compression.

Dec 28, 2013 | 2005 Gilera Runner VX 125

2 Answers

Gilera runner 125 st 2008 cuts out by arcing


coil lead plug cap needs replacing , no shield to protect spark plug from getting wet due to weather/water splash. electrical spray lubricant requires from damp start problem

Dec 29, 2012 | 2008 Gilera Runner ST 125

2 Answers

My gilera runner vx 125 wont start


have you checked ht lead from the spark plug as this may have jumped off

Feb 01, 2009 | 2005 Gilera Runner VX 125

1 Answer

Power failure


if the engine is dieing, check that the spark plug has a cap that is sealed eg rubber boot around it.
if the revs are still there but the bike slows the trans belt is getting water in it check the trans gasket for sealing.

Jan 19, 2009 | 2005 Gilera Runner VX 125

Not finding what you are looking for?
2005 Gilera Runner VX 125 Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5221 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Fabrice Wolters

Level 2 Expert

331 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...