Question about 2001 Suzuki AN 400 Burgman

1 Answer

Operating light, indicators or brakes causes

Burgman AN400 (2001). Operating light, indicators or brakes causes engine misfire. Seems to be an intermittent wiring problem.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, check / clean the connectors of the charging system; from stator to rectifier/regulator combo to battery. Preliminary suspect would be undercharging hence any additional electrical load robs the ignition power causing the misfire..

Offhand, use a voltmeter to test idling voltage and charging voltage. Postback results.

Good luck and thank you for asking FixYa.

Posted on Nov 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fiat seicento sx 2001 mil light comes on intermittently.code reader gives error p0300 but car seems fine. What could be wrong


code p 0300 refers to random/multiple cylinder misfires detected==causes spark plug/s ---HT lead/s--injector/s--ignition coil/s-low compression --- wiring
it could be simple moisture in the distributor cap, wiring connections
It could be a problem ECM unit
monitor the condition or take it to an accredited service center that has experience on your make of vehicle and have it checked out
could be a problem that has already been identified and has a manufacturer service bulletin in place

Sep 01, 2016 | Fiat Seicento Cars & Trucks

1 Answer

When i decel it seems I have a engine brake on or in a lower gear how do I fix this


The 650 Burgman has similar engine braking to a normal motorcycle so doesn't allow you to coast as with the smaller engined models. This allows greater control in deceleration, especially in the wet. The coasting on the smaller models can be disconcerting for some, where brakes have to be used to slow down, so make the most of the 650 capability. The 650 will coast eventually at speeds of less than slow walking pace. From what you say consoder this as normal behaviour from the engine.
Take care.

Jan 06, 2014 | 2003 Suzuki AN 650 Burgman

2 Answers

2007 cadillac cts engine cylinder misfire


Error code p0300 indicates rough idle and p0305 indicates engine misfire in cylinder 5. Check for faulty spark plug and its wiring. Also check for ignition coil and distributor. Replacing spark plug and its wiring may resolve the issue.

Jun 28, 2013 | 2007 Cadillac CTS 3.6L

1 Answer

My check engine light came on and the motor seems to be shaking? I drive about 30min to work and about 30min home, so I'm not sure if I will have time to take it in before I go to work? What seems to...


It is most likely a misfire, especially if the engine light starts flashing. Most misfires are due to the secondary ignition system wearing out (spark plugs and wires). I would replace the spark plug wires first as they are the more common cause, but it's a good idea to replace the plugs too.
**Note - if the engine light is flashing, it indicates catalyst damage at that time. Driving a vehicle for prolonged periods with the engine misfiring will result in catalytic converter damage.

Aug 25, 2011 | 1997 Acura CL

2 Answers

The engine light is on and blinking, engine trying to stall out


this means your engine has a misfire, there will be a code to ID the cylinder causing the light to flash, Kragen and other discount auto parts stores will test the system for free unless u are in California.

Dec 24, 2009 | 2004 Dodge Durango

3 Answers

P0300 code reading on Chevy aveo. Engine light flashes and stays solid intermittently. While driving on the freeway, engine suddenly cut off. Tried to restart. Could hear the starter turning but engine...


Pull out your spark plugs. Change them if dirty. There might be a problem with the fuel trim, thats causing spark plug to foul up prematurely. A stucked open EGR valve can also cause a multiple mispfire code(P0300) but then it would be accompanied by an EGR code(P402) which means excessive flow detected. Anyways if was indeed a fouled up spark plug change them as well as the air filter.

Jun 30, 2009 | 2005 Chevrolet Aveo

1 Answer

Intermittent misfiring and stalling


this sounds like a definate problem with vacuum check valve on your brake booster or the hose going to booster....that should solve your prob! good luck.......ps----------cheap part...quick fix!

May 22, 2009 | 2001 Daewoo Lanos

1 Answer

1999 Town Car began running very rough - suddenly.


When cleaning your engine, water/degreaser went down the spark plug ports. Try using a air compressor blow gun to remove the moisture from around the spark plugs and boots. The water was causing the engine to misfire on 3 cylinders at first and as the ports started to evaporate the moisture, the less misfiring was occuring. Dry thouroughly and hopefully coils do not have damage to them. Also check to make sure the boot is making good contact with the spark plug.

Mar 23, 2009 | 1999 Lincoln Town Car

3 Answers

What would cause 3 of the 6 plugs to misfire. 1998 buick century 3.1 . thanks


Check for trouble codes and check spark control module and coils

Mar 09, 2009 | 1998 Buick Century

1 Answer

Intermittent


Pull the spark plug wires out one by one and check for oil on wire. Sometimes the valve cover spark plug hole gaskets leak oil into the spark plug hole and causes a misfire. If oil found clean with brake or carb cleaner and blow out with compressed air. also when car runs bad listen under hood for snapping noise this would be spark escaping to ground somewere. In a dark garage you might be able to see the spark.

Feb 09, 2009 | 1995 Toyota 4Runner

Not finding what you are looking for?
2001 Suzuki AN 400 Burgman Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...