Question about 2005 Hyosung GT 250

2 Answers

Hyosung GT250R indicator not working

My Hyosung GT250R makes a buzzing noise (coming from the relay) when I try to indicate right (the indicator lights remain off). However, the left indicator works perfectly. Any ideas what is wrong? Thanks. Ross.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 301 Answers

It sounds like:
1) One of the wires that takes power to the right hand turn signals is shorted to the chassis.
2) One, or both, of the right hand turn signal bulbs is burnt out.
3) The turn signal switch has failed.

Posted on Nov 18, 2009

Testimonial: "Hey Wayneman, The rear indicator bulb was burnt out. Problem solved. Thanks so much. I really appreciate it :) Cheers, Ross"

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, this is not a solution but I have a lated question to the topic.
When I turn on my signal indicator, it showing that both of the left and right hand flashes (just like hazar indicator) but somehow only the right light actually go off, nothing on the left. Do u know and ideals is going on? The relay making this really loud noise, and its the hazar relay that going off, which one is the signal relay? Thanks in advance. Sean.

Posted on Jul 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Hyosung Comet GT250R wiring diagram


Hi, Jayden it could be a connector from the lighting coil, for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Hyosung Comet GT250R wiring diagram Google Search
gt250r wiring schematic
HYOSUNG GT 250 Service Manual
HYOSUNG Aquila GT250 Ej Service Manual
http://www.hyosung.hu/download/pdf/data/alkatresz-katalogusok/GT250%20PARTS%20CATALOGUE.pdf
http://www.alpha-sports.com/hyosung_parts.htm
HYOSUNG GT250 REi Owner Manual

Jan 08, 2018 | 2007 Hyosung Comet GT250R

1 Answer

2007 Hyosung GT250R service manual


Hi, Jayden you have a right to try but I don't deal in Hybrids I "HIGHLY" recommend that you purchase the correct regulator that was designed for your bike, the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day
HYOSUNG COMET 125 Service Manual
https://www.alpha-sports.com/Parts/H_GT250R.htm
HYOSUNG GT250 REi Owner Manual
2007 Hyosung GT250R
Hyosung GT250 Wikipedia

Nov 14, 2017 | 2007 Hyosung GT250R

1 Answer

08 hyosung gt250r starting issue


Hi, Ron and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a "LOAD" test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://www.perthstreetbikes.com/forum/showthread.php?t=140128
Hyosung GT250R not starting
HYOSUNG COMET 125 Service Manual
http://www.alpha-sports.com/hyosung_parts.htm
http://www.hyosung.com.au/downloads/manuals/GT250.pdf

Mar 15, 2017 | 2008 Hyosung GT250R

1 Answer

2007 Hyosung GV650 does not want to start after hazard relay burned


Hi, Marian the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://thelifeofdead.blogspot.com/2014/03/hyosung-gt650r-known-issues-and-remedies.html
2008 Hyosung Starting Electrical problems
HYOSUNG Aquil GV650 Service Manual
https://www.alpha-sports.com/Parts/H_GV650.htm
HYOSUNG GV650 User Manual

Jul 05, 2017 | 2007 Hyosung Avitar GV650

1 Answer

I have a problem with my hazard relay it is the second one that went on my hyosung gt250r in one week. I replaced it with an origenal part from hyosungsource but the relay starts clicking as soon as I...


You have a crossed wire someplace in your wireharness. go back to the dealer and make them change it - it should be under warranty if you bought it new.

Jan 06, 2012 | 2009 Hyosung GT 250

1 Answer

I haven't started my bike in almost 1 year. The starter does not even turn engine. I replaced battery and lights work. No noise at all when I press starter.


i have a 2007 gt250r and had a similar problem, on the right side beside the battery between the fairing and the frame is the starter solenoid, you can test it with a test light by putting the clamp of the test light on one side then the light on the other side, hit the starter button if the light doesnt come on it is the solenoid, about $50 off ebay

Aug 10, 2011 | 2008 Hyosung GT250R

1 Answer

I have a leaking pet **** on my 2008 hyosung gt250r, how can i fix this leak?


Make shure its not the sending unit under the tank it easy to miss MOPAR KENNY

May 22, 2011 | 2008 Hyosung GT250R

1 Answer

Blinkers come on steady rather than flashing. The flasher relay seemed as though it wasn't breaking the current flow to the blinkers, with a constant whine coming from the relay when the blinkers were...


A noise at the relay indicates a short circuit at atleast 1indicator, disconect all the indicators and check if the relay still makes a noise, if it is all quiet plug in the indicators 1at a time select left with the switch turned on and fit each indicator wires in the correct location if noise is emited as 1 indicator is connected you may want to check again with it disconnected. Have you checked that the bulb wattage. Suits that as marked on the flasher relay

Apr 26, 2011 | Honda GL 1000 (K3 Motorcycles

Not finding what you are looking for?
2005 Hyosung GT 250 Logo

1,300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...