Question about 1999 Honda CBR 900 RR Fireblade

1 Answer

Spark plug poped ot of my 99 crb 900 and want go back in like the threds are mesed up

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Yes, the threads did get damaged when the plug popped out. Most likely, the plug was not in properly or tightened so that there were several threads in play. Take your plug to any autoparts store and either borrow or buy a tap of the proper thread size to recut the threads in the cylinder. this is a bit tricky because it has to be straight, so if you are not comfortable doing this yourself have a bike shop do it. Good luck. Joe

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Spark plug and ignition coil problems.... plugged cat?


romove poping plug start engine if thier is major air pressure coming outyou have ahole in your piston replace piston overhaule kitand new piston possible thred damage on head,replace cat,and get a dog:) good luck.

Feb 22, 2013 | 1998 Ford Expedition

1 Answer

98 toyota camry spark plug wire keeps poping out of manifold and makes engine run sluggish ( runs good when you push it back in ) is there any way to keep wire from poping out ? ( Im unable to push spark...


Remove the wire from the plug and look inside the Boot, there should be some metal prongs that clamp onto the plug, check to see if they are set right, so that when you install the boot on the Spark Plug they will clamp and stay on the plug. If you're not sure what it should look like, pull off the boot on the plug next to the one you are working on and compare the two. You can use a long flat bladed screwdriver to bend the prongs, make sure you're Engine and Ignition are off when you do this.

Sep 08, 2010 | 1998 Toyota Camry

1 Answer

Think my spark plug needs changing. i have a MBK Thunder 125cc not a skyliner 125. where is the spark plug housed plz


in the top of the cylinder head! find the spark plug whire and folow it down to the top of the engine there you should find a cap that pushes over the spark plug
take off the cap and undo the plug (anty clock wise)
put in the new plus gently start it on the threds and dont tighten it up to tight,,(it only needs to be NIPPED UP) not done up with a 10 foot bar? or you could strip the threds out of the head,,,then you will have a big job on your hands to fix it

Jun 27, 2010 | 2005 MBK Skyliner 125

1 Answer

900 rmk going down trail and died No spark now


CDI box went out, or your stator poped. only things posssible, coils dont go out at the same time

Jan 25, 2010 | Polaris New Genuine Polaris Snowmobile...

2 Answers

Striped transmission drain plug case


the only way to fix a striped thred is to fit a (hellycoial?) in it, its a kind of spring that winds its way into the old thred and gives you a new thred to screw into (but there realy not very strong) i have used them when i striped a spark plug thred out and it lasted for years,,,you could buy a kit or take it to the bike shop for them to fit one in for you its a lot cheeper than a new case,, and you can still use the same plug,after its been fitted

Nov 05, 2009 | 2004 Harley Davidson FLSTC - FLSTCI...

1 Answer

Trying to remove spark plug number 5 on a 1998 zchevy Malibu, which way does the spark plug turn


anti clockwise to remove all plugs !
it may be spinning in the thred on the head !
if it is it will need to have a HELICOIL [ new thread] fitted after you get it out

Jul 20, 2009 | 1998 Chevrolet Malibu

2 Answers

Engine cranks but will not fire.


check to see if you are getting a spark from the plugs. Just pull the plug and connect it back to plug wire. Then with gloves ground of that plug at the threds. Have someone try to start it only allowing 3-4 repatisions, and see if you have a spark. If you dont have a spark, then it would be eaither be the sparkplugs, plug wiers, or your coil is bad.

May 19, 2009 | 1991 Dodge Dynasty

1 Answer

My 99 cbr 900 has no spark from plugs. Replaced the plugs and coil pack and still nothing. Wondering what coils ran what plugs to be sure connected properly. Battery seems fine. Have a cdi box on the way...


i had the same problem on my 97 fireblade it was the rectifier (voltage regulater), try unpluging it and see what happens it is located under the rear plastics it has fins on it too help keep it cool and should have 3 yellow wires, 1 green and 1 red on the plug

May 16, 2009 | 1999 Honda CBR 900 RR Fireblade

1 Answer

Dell speakers making a poping noise


may be problem with correct socket

Mar 14, 2009 | Audio Players & Recorders

1 Answer

1990 Saab 900 Turbo


Is the knock sensor, mass air flow sensor and all other necessary sensors plugged in? Also there is a hanger bracket on the front of the engine that shares the front two bolts of the intake manifold and there's about 3-4 ground wire terminals that attach to this bracket and the wires come off of the fuel injector wiring harness. I would check these things and any other obvious electrical connections.

Jul 07, 2008 | 1990 Saab 900 Hatchback

Not finding what you are looking for?
1999 Honda CBR 900 RR Fireblade Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...